Mche463quiz.txt

Card Set Information

Author:
nick115
ID:
106309
Filename:
Mche463quiz.txt
Updated:
2011-10-04 03:58:04
Tags:
mech
Folders:

Description:
MCHE 463 quiz
Show Answers:

Home > Flashcards > Print Preview

The flashcards below were created by user nick115 on FreezingBlue Flashcards. What would you like to do?


  1. N
    Sequence Number
  2. :
    Sequence number- initialize
  3. G
    Preparatory function
  4. X
    X axis movement command
  5. Z
    Z axis movement command
  6. U
    X Axis incremental movement
  7. W
    Z axis incremental movement
  8. F
    • W/G04-dwell in seconds -dec.allowed 22 22
    • W/G34&G35-change in lead-yes yes 25 34
    • W/G94-feed rate feed/min- yes no 31 40
    • W/G95 feed rate feed/ rev yes no 04 13
  9. S
    • w/G04-Dwell revolutions- no no 40 40
    • W/G96-css cut speed-
    • W/G92&97-RPM-
  10. T
    Tool Data index number- no no 20 20
  11. M
    Miscellaneous Function no no 20 20
  12. G00
    • Linear intepolation-rapid rate
    • int
    • Group-z
    • Modal-yes
  13. G01
    • Linear intepolation-feed rate
    • int-X
    • Group-A
    • Modal-yes
  14. G02
    • Circular intepolation-CW
    • int
    • Group-A
    • Modal-yes
  15. G03
    • Circular interpolation-ccw
    • int
    • group-A
    • Modal-yes
  16. G04
    • Dwell
    • Modal-no
  17. G40
    • Work surface programming off
    • int-X
    • Group-D
    • Moadl-yes
  18. G41
    • Work surface programming on tool left-
    • int-
    • Group-D
    • Modal-yes
  19. G42
    • Work Surface PRogramming on tool right
    • int
    • group-D
    • Modal-yes
  20. G70
    • inch programming
    • group I
    • Modal-yes
  21. G71
    • Metric programming
    • Gr-I
    • MO-yes
  22. G90
    • Absolute dimensional input
    • int-X
    • Group F
    • Modal yes
  23. G91
    • Invremental dimensional input
    • Group F
    • Modal yes
  24. G95
    • Feed per spindle revolution
    • G
    • yes
  25. G96
    • constant surface speed
    • H
    • yes
  26. G97
    • Revolutions per minute
    • int X
    • H
    • yes
  27. M00
    prog stop
  28. M01
    optional program stop(when a switch is on)
  29. M02
    end of program
  30. M30
    end of program segment
  31. M32
    end of last segment
  32. M9
    coolant stop
  33. M03
    Spindle on cw
  34. M04
    spindle on ccw
  35. M06
    Turret index w/o retract
  36. M08
    Collant Start
  37. M13
    spindle on cw & Coolant Start
  38. M14
    Spindle on ccw & coolant start
  39. M26
    Turret index with retract
  40. M41
    Low Range
  41. M42
    High range

What would you like to do?

Home > Flashcards > Print Preview