Windows 7 (70-680)

Card Set Information

Author:
Nato
ID:
130439
Filename:
Windows 7 (70-680)
Updated:
2012-01-27 00:21:30
Tags:
Windows 70 680
Folders:

Description:
Some practice questions for the Windows exam 70-680 Created 25-1-2012 - Currently a work-in-progress
Show Answers:

Home > Flashcards > Print Preview

The flashcards below were created by user Nato on FreezingBlue Flashcards. What would you like to do?


  1. You perform a clean installation of Windows 7 on a computer. You need to ensure that you can run Windows XP mode in windows 7. What should you do?

    A. Install Windows XP in the same partition as Windows 7.
    B. Install Windows XP in a different partition than Windows 7.
    C. Create a Data Execution Prevention (DEP) exception.
    D. Enable hardware-assisted virtualization.
    D.
    (this multiple choice question has been scrambled)
  2. You have a computer that runs Windows 7. The computer has a single volume. You install 15 applications and customize the environment.

    You complete the following actions:
    - Create an export by using Windows Easy Transfer.
    - Create a system image by using Backup and Restore.
    - Install the User State Migration Tool (USMT) and run Scanstate. The disk on the computer fails.
    - You replace the disk.

    You need to restore the environment to the previous state. What should you do?

    A. Install Windows 7, install USMT, and then run Loadstate.
    B. Install Windows 7 and then import the Windows Easy Transfer package.
    C. Start the computer from a Windows Recovery Environment (Windows RE) disk and then run Bcdboot.exe.
    D. Start the computer from a Windows Recovery Environment (Windows RE) disk and then restore the system image.
    D.
    (this multiple choice question has been scrambled)
  3. Your network consists of one Active Directory domain. You have two computers named Computer1 and Computer2 that run Windows 7. Both computers are members of the domain.

    From Computer1, you can recover all Encrypting File System (EFS) encrypted files for users in the domain. You need to ensure that you can recover all EFS encrypted files from Computer2.

    What should you do?

    A. On Computer1, run Cipher.exe and specify the /removeuser parameter. On Computer2, run Cipher.exe and specify the /adduser parameter.
    B. On Computer1, run Secedit.exe and specify the /export parameter. On Computer2, run Secedit.exe and specify the /import parameter.
    C. On Computer1, back up %systemroot%\DigitalLocker. On Computer2, restore %systemroot%\DigitalLocker.
    D. On Computer1, export the data recovery agent certificate. On Computer2, import the data recovery agent certificate.
    D.
    (this multiple choice question has been scrambled)
  4. You have a computer that runs Windows 7. The computer has System Protection enabled. You need to retain only the last System Protection snapshot of the computer. All other snapshots must be deleted.

    What should you do?

    A. Run Disk Cleanup for Programs and Features.
    B. Run Disk Cleanup for System Restore and Shadow Copies.
    C. From the System Protection Restore settings, select Turn off System Restore.
    D. From the System Protection Restore settings, select Only restore previous versions of files.
    B. Shadow copies are automatically saved as part of a restore point. If system protection is enabled, Windows 7 automatically creates shadow copies of files that have been modified since the last restore point was created. By default, new restore points are created every seven days or whenever a significant system change (such as a driver or application installation) occurs.
    (this multiple choice question has been scrambled)
  5. You have a computer that runs Windows 7. You have a system image of the computer. You need to restore a single file from the system image. You must achieve this goal in the minimum amount of time.

    What should you do first?

    a. From Disk Management, select Attach VHD.
    b. From Backup and Restore, select Restore my files.
    c. Restart the computer and run System Restore.
    d. Restart the computer and run System Image Recovery.
    • a. Attach VHD
    • Attaching a VHD activates the VHD so that it appears on the host computer as a local hard disk drive. This is sometimes called “surfacing a VHD” because the VHD is now visible to users. If the VHD already has a disk partition and file system volume when you attach it, the volume inside the VHD is assigned a drive letter. The assigned drive letter is then available for use, similar to when you insert a USB flash drive into a USB connector. All users (not just the current user) can use the attached VHD in the same way they use other volumes on local physical hard disk drives (depending on security permissions). Furthermore, because you can attach a VHD that is located on a remote server message block (SMB), you can manage your images remotely.
  6. You have a computer that runs Windows 7. You need to identify how much disk space is occupied by previous versions. What should you do?

    A. At a command prompt, run Vaultcmd.
    B. From the properties of drive C, view the previous versions settings.
    C. At a command prompt, run Diskpart.
    D. From System, view the System Protection settings.
    D. From System, view the System Protection settings.

    NOT Diskpart:
    Microsoft command-line tool Diskpart is used to create and format volumes on the target computer.

    NOT Vaultcmd:
    Creates, displays and deletes stored credentials.

    NOT Properties of drive C:
    Allows you to view contents, but does not show size.
    (this multiple choice question has been scrambled)
  7. You have a computer that runs Windows 7. You manually create a system restore point. You need to restore a copy of a file stored on drive C from two days ago. You must achieve this goal in the minimum amount of time. What should you do?

    A. From the command prompt, run Wbadmin get items.
    B. From Recovery, select System Restore.
    C. From Backup and Restore, select Restore my files.
    D. From the properties of the file, select Previous Versions.
    D. From the properties of the file, select Previous Versions.

    NOT System Restore:
    System Restore restores system files and settings and does not affect any of your documents, pictures, or other personal data.

    NOT Backup and Restore:
    System restore point was created, no backup meantioned.
    (this multiple choice question has been scrambled)
  8. You have a computer that runs Windows 7. You add a new hard disk drive to the computer and create a new NTFS partition. You need to ensure that you can use the Previous Versions feature on the new drive. What should you do?

    A. From the properties of the new drive, create a share and modify the caching settings.
    B. From System and Security, enable BitLocker Drive Encryption (BitLocker).
    C. From Disk Management, convert the new disk to a dynamic disk.
    D. From System Properties, configure the System Protection settings.
    D. From System Properties, configure the System Protection settings.

    System protection might not be turned on for the drive. If system protection is not turned on, Windows can't create previous versions.
    (this multiple choice question has been scrambled)
  9. You have a computer that contains the folders shows in the following table.

    Folder name Folder location
    Data1 C:\Users\User1
    Data2 C:\Users\User1

    You accidentally delete the Data1 folder. You need to restore the contents of the Data1 folder. The solution must not overwrite any changes to the Data2 folder. What should you do?

    A. From the Previous Versions tab of the User1 folder, click Copy.
    B. From Recovery, restore a system restore point.
    C. Start the computer and then press F8. Restore the Last Known Good Configuration.
    D. From the Sharing tab of the User1 folder, modify the Caching settings.
    A. From the Previous Versions tab of the User1 folder, click Copy.

    Copy from Previous Versions allows the data to be returned to a user detailed location.

    NOT Recovery:
    Would affect Data2

    NOT Sharing:
    Modifying Caching settings wont help.

    NOT Last Known Good Configuration:
    Extreme overkill and would affect Data2
    (this multiple choice question has been scrambled)
  10. You need to back up your Encrypting File System (EFS) certificate. You must achieve this goal in the minimum amount of time. What should you do?

    A. Run Cipher.exe /x.
    B. From Backup and Restore, click Back up now.
    C. Run Ntbackup.exe /p.
    D. From Backup and Restore, click Create a system image.
    A. Run Cipher.exe /x.

    Cipher is used to manage certificates.

    NOT Backup and Restore:
    Only the EFS certificate needs to be backed up and time is a factor.
    (this multiple choice question has been scrambled)
  11. You need to reduce the amount of space currently being used to store system restore points. What should you do?

    A. Configure Windows Backup.
    B. Run Msconfig.exe.
    C. Run Disk Cleanup.
    D. Configure disk quotas.
    C. Run Disk Cleanup.

    Shadow info:
    Shadow copies are automatically saved as part of a restore point. If system protection is enabled, Windows 7 automatically creates shadow copies of files that have been modified since the last restore point was created. By default, new restore points are created every seven days or whenever a significant system change (such as a driver or application installation) occurs.

    NOT Disk Quota:
    Does not directly affect size of System Restore Points.
    (this multiple choice question has been scrambled)
  12. You have a computer that runs Windows Vista. You install Windows 7 on a new partition on the computer. You need to ensure that the computer always starts Windows Vista by default. What should you do?

    A. Run Bcdedit.exe and specify the /bootems parameter.
    B. Run Bcdedit.exe and specify the /default parameter.
    C. Create a boot.ini file in the root of the Windows 7 partition.
    D. Create a boot.ini file in the root of the Windows Vista partition.
    B. Run Bcdedit.exe and specify the /default parameter.

    The Bcdedit.exe utility allows you to manage boot configuration.

    /default - Sets the default entry that the boot manager willl use.
    /bootems - Enable or disables Emergency Management Services for a boot application.

    NOT boot.ini:
    Windows (specifically Ntldr) uses the Boot.ini file to determine which operating system options to display when the Startup program is running.
    (this multiple choice question has been scrambled)

What would you like to do?

Home > Flashcards > Print Preview