chapter 7

Card Set Information

Author:
studysuccess
ID:
135364
Filename:
chapter 7
Updated:
2012-02-14 21:48:09
Tags:
easy resident technician certification
Folders:

Description:
staples
Show Answers:

Home > Flashcards > Print Preview

The flashcards below were created by user studysuccess on FreezingBlue Flashcards. What would you like to do?


  1. which step in the EP print process uses a laser to discharge selected areas of the photosensitive drum, thus forming an image on the drum?
    A) writing
    B) developing
    C) cleaning
    D) transferring
    A) writing
    (this multiple choice question has been scrambled)
  2. what is the correct order of the steps in the EP print process?
    A) developing, writing, transferring, fusing, charging, cleaning
    B) charging, writing, developing, transferring, fusing, cleaning
    C) transferring, writing, developing, charging, cleaning, fusing
    D) cleaning, charging, writing, developing, transferring, fusing
    D) cleaning, charging, writing, developing, transferring, fusing
    (this multiple choice question has been scrambled)
  3. what is the most basic printer type?
    A) interfaces and print media
    B) laser printer
    C) impact printer
    D) bubble-jet printer
    C) impact printer
    (this multiple choice question has been scrambled)
  4. which voltage is applied to the paper to transfer the toner to the paper in an EP process laser printer?
    A) +600VDC
    B) -600VDC
    C) +6000VDC
    D) -6000VDC
    A) +600VDC
    (this multiple choice question has been scrambled)
  5. what is the result of an absent or broken static-eliminator strip in either an EP process or HP LaserJet printer?
    A) paper jams may occur in both types of printers because the paper may curl around the photosensitive drum.
    B) nothing. both printers will continue to function normally.
    C) nothing will happen in EP process printers, but HP laserJet printers will flash a "-671 error" message
    D) nothing will happen in HP laserJet printers, but EP process printers will flash a "-671 error" message
    A) paper jams may occur in both types of printers because the paper may curl around the photosensitive drum
    (this multiple choice question has been scrambled)
  6. which type of printers are referred to as page printers, because they receive their print job instructions one page at a time? (select all that apply).
    a) daisy wheel
    b) dot matrix
    c) bubble jet
    d) laser
    • c) bubble jet
    • d) laser
  7. which of the following are possible interfaces for printers? (select all that apply).
    a) parallel
    b) mouse port
    c) serial
    d) network
    • a) parallel
    • c) serial
    • d) network
  8. which laser printer component formats the print job for the type of printer being used?
    A) formatter software
    B) printer controller assembly
    C) corona assembly
    D) DC power supply
    B) printer controller assembly
    (this multiple choice question has been scrambled)
  9. which of the following are page-descriotion languages? (select all that apply)
    a) Page Description Language (PDL)
    b) PostScript
    c) PageScript
    d) Print Control Language (PCL)
    • b) PostScrip
    • d) Print Control Language (PCL)
  10. the basis weight is the weight in pounds of 500 sheets of bond paper for what size of paper?
    A) 8 1/2 X 11 inch
    B) 17X22 inch
    C) 11X17 inch
    D) 8 1/2 X17 inch
    B) 17X22 inch
    (this multiple choice question has been scrambled)
  11. Any printer that uses the electrophotographic process contains how many standard assemblies?
    A) eight
    B) six
    C) five
    D) four
    A) eight
    (this multiple choice question has been scrambled)
  12. which type of printers can be used with multipart forms?
    A) EP process laser printers
    B) bubble-jet printers
    C) HP process laser printers
    D) dot-matrix printers
    B) bubble-jet printers
    (this multiple choice question has been scrambled)
  13. LED page printers differ from EP process laser printers in which step?
    A) writing
    B) developing
    C) changing
    D) transferring
    E) fusing
    F) cleaning
    A) writing
    (this multiple choice question has been scrambled)
  14. what part of both EP process and HP LaserJet process printers supplies the voltages for the charging and transfer corona assemblies?
    A) controller circuitry
    B) DC power supply (DCPS)
    C) high-voltage power supply (HVPS)
    D) transfer corona
    C) high-voltage power supply (HVPS)
    (this multiple choice question has been scrambled)
  15. with EP process laser printers, the laser discharges the charged photosensitive drum to __ VDC
    A) -600
    B) +600
    C) 0
    D) -100
    D) -100
    (this multiple choice question has been scrambled)
  16. which impact printer has a printhead that contained a row of pins that are triggered in patterns that form letters and numbers as the printhead moves across the paper?
    A) daisy-wheel printer
    B) laser printer
    C) bubble-jet printer
    D) dot-matrix printer
    D) dot-matrix printer
    (this multiple choice question has been scrambled)
  17. which printer contains a wheel that looks like a flower with raised letters and symbols on each petal?
    A) bubble-jet printers
    B) dot-matrix printer
    C) daisy-wheel printer
    D) laser printer
    C) daisy-wheel printer
    (this multiple choice question has been scrambled)
  18. which of the following is not an advantage of the daisy-wheel printer?
    A) speed
    B) can print multipart forms
    C) print quality is comparable to a typewriter
    D) relatively inexpensive
    A) speed
    (this multiple choice question has been scrambled)
  19. which printer part gets the toner from the photosensitive drum onto the paper?
    A) fusing assembly
    B) drum
    C) corona assembly
    D) laser-scanning assembly
    C) corona assembly
    (this multiple choice question has been scrambled)
  20. which of the following is not an advantage of a Universal Serial Bus (USB) printer interface?
    A) it automatically recognizes new devices
    B) it allows the printer to communicate with networks, servers, and workstations
    C) it has a high transfer rate than a serial connection.
    D) it has a higher transfer rate than a parallel connection.
    B) it allows the printer to communicate with networks, servers, and workstations
    (this multiple choice question has been scrambled)

What would you like to do?

Home > Flashcards > Print Preview