The flashcards below were created by user
Anonymous
on FreezingBlue Flashcards.
-
Table 2.5
Allowable Stresses in Tubular Connection Welds
-
Figure 2.1
Maximum Fillet Weld Size Along Edges in Lap Joints
-
Figure 2.1
Transition of Butt Joints in Parts of Unequal Thickness(Nontubular)
-
Figure 2.8
- Fillet Welds on Opposite Sides of a Common Plane
- ( see2.8.3.5)
-
Table 3.1
Prequalified Base Metal- Filler Metal Combinations for Matching Strength.
-
Table 3.2
- Prequalified Minimum Preheat and Interpass Temperature
- (see 3.5)
-
Table 3.4
Minimum Prequalified PJP Weld Size(E) (see 3.12.2.1)
-
Table 3.6
Prequalified Joint Dimensions and Groove Angles for CJP Groove Welds in Tubular T-, Y-, and K- Connections Made by SMAW , GMAW-S, and FCAW (see3.13.4)
-
Table 3.7
Prequalified WPS Requirements (see 3.7)
-
Figure 3.3
Pregualified PJP Groove Welded Joint Details ( see3.12) Dimensions in Inches)
-
Figure 3.4
Prequalified CJP Groove Welded Joint Details( see3.13) ( Dimensions in Inches)
-
Figure 3.10
Prequalified Joint Details for CJP Groove Welds in Tubular T-, Y-, and K- Connections- Concave Improved Profile for Heavy Sections (see3.13.4)
-
Figure 3.11
Prequalified Skewed T- Joint Details ( Nontubular) (See 3.9.3)
-
Table 4.1
WPS Qualification- Production Welding Positions Qualified by Plate, Pipe, and Box Tube ( see4.3)
-
Table 4.5
PQR Essential Variable Changes Requiring WPS Requalification for SMAW, SAW, GMAW, FCAW, and GTAW.
-
Table 4.10
Welder and Welding Operator Qualification- Production Welding Positions Qualified by Plate, Pipe, and Box Tube Tests (see 4.18.1)
-
Table 4.13
Electrode Classification Groups ( See Table 4.12)
-
Figure 4.3
Positions of Test Plates for Groove Welds( see 4.24)
-
Figure 4.5
Positions of Test Plate for Fillet Welds (see 4.2.4)
-
Figure 4.24
Tubular Butt Joint- Welder Qualification with and without Backing ( see 4.26)
-
Figure 4.25
Tubular Butt Joint - WPS Qualification with and without Backing ( see 4.12.1 and 4.12.2)
-
Table 5.1
Allowable Atmospheric Exposure of Low- Hydrogen Electrodes ( see 5.3.2.2 and 5.3.2.3)
-
Table 5.2
Minimum Holding Time ( see 5.8.1)
-
Table 5.8
Minimum fillet Weld Sizes ( see 5.14)
-
Figure 5.4 Acceptable and Unacceptable Weld Profiles (see5.24)
-
Table 7.1
Mechanical Property Requirements for Studs ( see 7.3.1)
-
Table 7.2
Minimum Fillet Weld Size for Small Diameter Studs ( see 7.5.5.4)
|
|