test

Card Set Information

Author:
Anonymous
ID:
140419
Filename:
test
Updated:
2012-03-07 22:40:53
Tags:
402
Folders:

Description:
402-
Show Answers:

Home > Flashcards > Print Preview

The flashcards below were created by user Anonymous on FreezingBlue Flashcards. What would you like to do?


  1. 127.0.0.1 is considered to be which of the following IP addresses?
    Loopback address
  2. Which of the following commands would be used to list all listening ports on a system?
    NETSTAT -A
  3. Which of the following IP addresses are considered to be private IP addresses? (Select TWO).
    10.13.90.8, 192.168.0.1
  4. Which of the following allows a program or port through a software firewall?
    Exception
  5. Which of the following commands would allow a technician to map connectivity between IP
    addresses?
    TRACERT
  6. The TELNET command allows a technician to do which of the following?
    Execute commands on a remote machine.
  7. Which of the following commands will allow a user to discover their IP address, subnet, and DNS?
    IPCONFIG /ALL
  8. When installing a wireless access point, which of the following should be considered when limiting outside users?
    Placement
  9. All of the following broadband types can be used for VoIP EXCEPT:
    satellite.
  10. When installing VoIP in a small office home office (SOHO), which of the following broadband connections would be the LEAST efficient?
    .Satellite
  11. Which of the following tools is BEST used to troubleshoot a computer that will not boot?
    Power supply tester
  12. A screw has fallen inside the computer case, which of the following tools should be used to retrieve the screw?
    Extension magnet
  13. When a technician is replacing anything inside the case, which of the following tools should be used?
    Anti-static, wrist strap
  14. Which of the following commands is used to test connectivity between network devices?
    PING
  15. Which of the following IP addresses is used to test the functionality of a machine's NIC?
    169.254.10.10
  16. After removing a virus from a machine, the user is still having problems connecting to the Internet. Which of the following should the technician check?
    Proxy settings
  17. Which of the following tools should the technician utilize to control a user's machine in a different location?
    RDP
  18. Which of the following tools can a technician use to remotely access a client's machine to find out which services are running?
    Computer Management
  19. When a technician is installing a wireless access point, which of the following should be performed FIRST?
    Change default passwords
  20. When installing an access point on a network, which of the following is the MAXIMUM length of a single CAT5e cable run?
    328 feet (100 meters)
  21. Which of the following settings is the MOST important to properly configure when trying to prevent a machine from being infected?
    Auto update of the antivirus program
  22. Which of the following commands compares two files then displays the differences?
    FC
  23. A user states that a networked printer is not working today, yesterday the printer worked fine. The technician checks the user's print queue and sees several jobs in the queue. The queue is flushed, restarted, and the user is still having the same issue. Which of the following should be verified NEXT on the printer?
    .That the IP is static
  24. Which of the following tools is BEST used to test a serial port?
    Loopback plugs
  25. When replacing components in a computer, which of the following tools should a technician use?
    Anti-static pad
  26. Which of the following tools is used to consolidate files and folders on a local drive?
    DEFRAG
  27. Which of the following commands maps network resources?
    NET USE
  28. While at work, a client is trying to retrieve documents from their home computer. The client tries to connect to their home PC with the modem's IP address, but all the client receives is the modem's web interface. Which of the following should the technician make sure is configured in regards to the modem?
    Port forwarding
  29. A computer is having problems with programs closing randomly. Which of the following is the BEST tool the technician can use to help troubleshoot the PC?
    Event Viewer
  30. A user has downloaded a program that is now causing problems with the PC. Which of the following tools can a technician use to help bring the computer back to a usable state?
    System Restore
  31. A computer's performance has degraded, which of the following tools can be used to troubleshoot this problem?
    Task Manager
  32. Which of the following commands will correct file system errors?
    CHKDSK
  33. A printer's documents have been getting lighter in print quality over the last month, now all the outputs are blank. Which of the following should be replaced?
    Toner
  34. A technician needs to edit applications and services that are running on a user's machine, once the OS has loaded. Which of the following commands would MOST likely be used to complete this task?
    Task Manager
  35. A technician notices a machine's performance has degraded over time, and the startup and shutdown period has increasingly gotten longer. Which of the following should be used to increase disk performance?
    DEFRAG
  36. A technician notices a machine's performance has degraded. The machine has constant errors when trying to read data from the drive. Which of the following should be used to repair the disk errors?
    CHKDSK
  37. A technician needs to make changes to a batch file. Which of the following commands would the technician MOST likely use?
    EDIT
  38. Which of the following commands would a technician MOST likely use to reorganize files on a hard drive to increase performance?
    DEFRAG
  39. Which of the following commands would a technician MOST likely use to verify network settings?
    IPCONFIG
  40. Which of the following commands would a technician MOST likely use to test connectivity to a remote device?
    PING
  41. Which of the following commands would a technician MOST likely use to replace corrupted DLL files?
    SFC
  42. Which of the following commands would a technician use to move data between two drives?
    XCOPY
  43. Which of the following commands would a technician use to view all files and folders located on a hard drive?
    DIR
  44. Which of the following commands would a technician use to remove all data from a drive?
    FORMAT
  45. Which of the following commands would a technician use to troubleshoot network connectivity by determining where the data is being dropped?
    TRACERT
  46. Which of the following commands would a technician use to determine the DNS servers that a workstation is currently using?
    NSLOOKUP
  47. Which of the following commands would a technician use to map a drive from a remote computer?
    NET
  48. Which of the following commands would a technician use to verify connectivity to a network node?
    PING
  49. Which of the following commands would a technician MOST likely use to create new directories?
    CD
  50. Which of the following commands would a technician MOST likely use to map a printer from a remote computer?
    NET USE
  51. Which of the following commands would a technician use to display IP and DNS settings on a machine?
    IPCONFIG /all
  52. Which of the following commands would a technician use to create a new directory?
    MD
  53. Which of the following connection types would MOST likely be installed to provide direct remote access connectivity?
    ISDN
  54. Which of the following connection types would be installed to provide a connection between two offices using a PSTN?
    ISDN
  55. If available, which of the following connection types would MOST likely be installed to provide high speed connectivity?
    Cable
  56. Which of the following connection types would MOST likely be installed to provide both Telco and Internet connections for a large company?
    T1
  57. Which of the following settings needs to be adjusted inside of a WAP, to provide a network to a wireless device?
    SSID
  58. Which of the following WAP settings provides valid network IP addresses to its clients trying to connect via wireless?
    DHCP
  59. Which of the following would be used to implement digital phone service inside of a large company?
    VoIP
  60. Which of the following encryption methods needs to be configured inside of a WAP to provide the HIGHEST level of security on the network?
    WPA
  61. Which of the following settings allows a custom application to access network resources when the default port is being blocked?
    Port forwarding
  62. Which of the following should be flashed on a firewall to make sure it is the most current version available?
    Firmware
  63. Which of the following would MOST likely need to be updated to reduce the risk of new exploits?
    Definitions
  64. When updated, which of the following will allow network access to new users?
    ACLs
  65. Which of the following needs to be updated to add a new site to a company's corporate network?
    Route lists
  66. Which of the following connection types is used to provide mobile users with network access?
    Cellular
  67. Which of the following would MOST likely be used to help secure a company's network?
    A firewall
  68. Which of the following tools would a technician use to map a drive to a user's machine?
    NET USE
  69. Which of the following tools can be used to remotely configure a network device?
    TELNET
  70. Which of the following mail protocol settings would MOST likely be used when a client needs the ability to synchronize folders?
    IMAP
  71. Which of the following uses port 25 by default?
    SMPT
  72. Which of the following uses port 110 by default?
    POP3
  73. Which of the following uses port 143 by default?
    IMAP
  74. Which of the following uses port 21 by default?
    FTP
  75. Which of the following uses port 80 by default?
    HTTP

What would you like to do?

Home > Flashcards > Print Preview