normaloperationscrj200.txt

Card Set Information

Author:
erau52
ID:
151722
Filename:
normaloperationscrj200.txt
Updated:
2012-05-02 15:19:51
Tags:
nb
Folders:

Description:
pncl
Show Answers:

Home > Flashcards > Print Preview

The flashcards below were created by user erau52 on FreezingBlue Flashcards. What would you like to do?


  1. What are three ways you are able to clear the APU for start?
    1. get a three finger signal from a ground crewmember 2. look out the galley door and immidieatly start the APU 3. immediately after completing the external pre or post flight inspection and verifying the area is clear prior to entering the aircraft
  2. what does the AVAIL light indicate for the APU?
    the APU is available for bleed air extraction
  3. How long should you allow the APU RPM to stabilize at 100% before applying bleed air load?
    2 minutes
  4. If Wing or Cowl Anti Ice is required for takeoff or landing you must do so __________pressurized?. Un pg 6-2
  5. for circuit breakers how long is recomended to wait before attempting one reset?
    3 mins pg 6-3

What would you like to do?

Home > Flashcards > Print Preview