Chapter 6a

Home > Preview

The flashcards below were created by user Alira03 on FreezingBlue Flashcards.


  1. The two general types of exhaust systems used on reciprocating aircraft engines are:
    • Short Stack
    • Collector
  2. _______ allow for expansion and contraction of the exhaust system.
    Bellows
  3. The purpose of the ______ surrounding the muffler is to capture heat for other systems
    Shroud
  4. Spring Loaded ______ _______ allow for movement without leakage,and slight misalignment of exhaust components.
    Ball Joints
  5. Exhaust _______ use the velocity of the exiting exhaust gases to produce a venturi effect.
    Augmentors
  6. Exhaust system parts should never be marked with a ____ pencil.
    Lead
  7. A crack on an exhaust system component will often show as a _____ gray or ____ black streak on the outside of the part.
    Flat, Sooty
  8. Exhaust system failure almost always creates what hazards?
    • Fire
    • Carbon Monoxide
  9. Carbon build up in the waste gate unit of a turbocharger engine is often referred to as _____ deposits.
    Coke
  10. A turbocharger system places a _____(Higher or Lower) pressure on the exhaust components.
    Higher

Card Set Information

Author:
Alira03
ID:
163957
Filename:
Chapter 6a
Updated:
2012-07-25 21:09:45
Tags:
powerpalnt
Folders:

Description:
back of book
Show Answers:

What would you like to do?

Home > Flashcards > Print Preview