WAN Q9

Card Set Information

Author:
kirin
ID:
167371
Filename:
WAN Q9
Updated:
2012-08-25 11:23:30
Tags:
WAN Quiz
Folders:

Description:
Wide Area Network Quiz 9 - Network Troubleshooting
Show Answers:

Home > Flashcards > Print Preview

The flashcards below were created by user kirin on FreezingBlue Flashcards. What would you like to do?


  1. Which troubleshooting method should a network administrator use when the problem is suspected to be a physical one.

    A) Top down
    B) Bottom up
    C) Divide and conquer
    D) Left-Right-Center
    B) Bottom up
    (this multiple choice question has been scrambled)
  2. Why is it important for the network administrator to establish the network performance baseline?

    A) To allow the network administrator to determine the maximum capacity of the network.
    B) To allows the network administrator to determine the difference between abnormal behaviour and proper network performance.
    C) To allow the network administrator to determine the maximum capacity of the network.
    D) To allow the network administrator to locate the bottlenecks in the network.
    B) To allows the network administrator to determine the difference between abnormal behaviour and proper network performance.
    (this multiple choice question has been scrambled)
  3. Which troubleshooting approach is suggested for dealing with a complex problem that is suspected of being caused by faulty network cabling?

    A) Middle Out
    B) Divide and Conquer
    C) Bottom Up
    D) Top Down
    C) Bottom Up
    (this multiple choice question has been scrambled)
  4. Network Topology Diagram                                          .
                                                                          
    A) contains accurate, up-to-date records of the hardware and software used in a network.
    B) provides a graphical representation of a network, which illustrates how each device in a network is connected.
    C) contains baseline records of the hardware and software used in end-system devices such as servers, network management consoles, and desktop workstations.
    D) shows the physical layout of the devices connected to the network
    B) provides a graphical representation of a network, which illustrates how each device in a network is connected.
    (this multiple choice question has been scrambled)
  5. The network baseline determines the "                                  " of the network.

    A) connectivity
    B) abnormality
    C) personality
    D) capacity
    C) personality
    (this multiple choice question has been scrambled)
  6. An user complained that she can't access a particular website. When you tried to troubleshoot and perform a ping to the website from the user's terminal, the ping is successful. Hence you can conclude that the problem is                       .

    A) below the Network Layer (Layer 3)
    B) at the Physical Layer (Layer 2) or Data Link Layer (Layer 2)
    C) above the Network Layer (Layer 3)
    D) at the Network Layer (Layer 3)
    C) above the Network Layer (Layer 3)
    (this multiple choice question has been scrambled)
  7. End-system Configuration Table                                       .

    A) provides a graphical representation of a network, which illustrates how each device in a network is connected.
    B) shows the physical layout of the devices connected to the network
    C) contains baseline records of the hardware and software used in end-system devices such as servers, network management consoles, and desktop workstations.
    D) contains accurate, up-to-date records of the hardware and software used in a network.
    C) contains baseline records of the hardware and software used in end-system devices such as servers, network management consoles, and desktop workstations.
    (this multiple choice question has been scrambled)
  8. Which troubleshooting method should a network administrator use when the problem is suspected to lies with the software. 

    A) Top down
    B) Divide and conquer
    C) Bottom up
    D) Left-Right-Center
    A) Top down
    (this multiple choice question has been scrambled)
  9. Network Configuration Table                                         .

    A) contains baseline records of the hardware and software used in end-system devices such as servers, network management consoles, and desktop workstations.
    B) contains accurate, up-to-date records of the hardware and software used in a network.
    C) shows the physical layout of the devices connected to the network
    D) provides a graphical representation of a network, which illustrates how each device in a network is connected.
    B) contains accurate, up-to-date records of the hardware and software used in a network
    (this multiple choice question has been scrambled)
  10. Match the Cisco commands with their corresponding description.

    Commands: 
    ping
    show ip interface brief
    show ip route
    show cdp neighbor detail

    Descriptions:
    command is used to obtain detailed information about directly connected Cisco neighbor devices.
    test connectivity with neighboring devices before logging in to them.
    display the routing table in a router to learn the directly connected neighbors, more remote devices (through learned routes), and the routing protocols that have been configured.
    display the up or down status and IP address of all interfaces on a device.
    • ping => test connectivity with neighboring devices before logging in to them.  
    • show ip interface brief => display the up or down status and IP address of all interfaces on a device.  
    • show ip route => display the routing table in a router to learn the directly connected neighbors, more remote devices (through learned routes), and the routing protocols that have been configured.  
    • show cdp neighbor detail => command is used to obtain detailed information about directly connected Cisco neighbor devices.

What would you like to do?

Home > Flashcards > Print Preview