LCD test 2 fullsail

Card Set Information

Author:
wolffxfx
ID:
178257
Filename:
LCD test 2 fullsail
Updated:
2012-10-18 20:02:11
Tags:
LCD test fullsail
Folders:

Description:
LCD test 2 fullsail
Show Answers:

Home > Flashcards > Print Preview

The flashcards below were created by user wolffxfx on FreezingBlue Flashcards. What would you like to do?


  1. How does light influence how we perceive an object or person?
    • The way light illuminates an object helps define how we think or feel about that object
    • color
    • angle
    • intenity
  2. What are the properties of a particle?
    • increase intesity doest not increase energy
    • incresse frequency increase energy
    • travel thourw vacume
  3. Why can light be considered a particle
    • ncrease intesity doest not increase energy
    • incresse frequency increase enery
    • travel thourw vacume
  4. Refraction -
    The bending of light waves or rays as they go from one material to anotherdue to the differences in velocities in the material
  5. What is the visible spectrum?
    roygbiv
  6. How is light created?
    heat
  7. Angle of Incidence –
    The angle between the incident (incoming) light ray and the normalline
  8. Spherical Reflector –
    • A reflector shaped like a portion of a sphere so that light from apoint
    • source at the center point of the sphere will be reflected back through
    • thecenter point of the sphere
  9. What does a diffuse reflector do
    The reflection of light from an uneven or granular surface such that anincident ray is seemingly reflected at a number of angles
  10. What is a near perfect reflector?
    all refltion
  11. Angle of Reflection –
    The angle between the reflected (outgoing) light ray and the normalline
  12. ERS
    Ellipsoidal Reflector Spotlight
  13. ers used for
    front light - key - fill -
  14. What type of light is produced by a Fresnel?
    soft light
  15. What type of lamp is used in a Par Can?
    sealed beam reflector
  16. What type of reflector is used in a Par lamp
    parabolic aluminized reflector
  17. What are the designations of Par lamps?
    very narrow spot, narrow spot, med,  flood
  18. What type of reflector is used in a CYC light?
    asymmetrical reflector
  19. 21 What is the optimum throw distance for a CYC light?
    8 feet
  20. How do you focus a follow spot?
    trombone
  21. What is a barn door?
    A set of external shutters that mount in the gel holder of a fixture. Commonlyused in Fresnels, can also be used in PAR fixtures
  22. blind spot?
    other eye comps
  23. Transmission Value –
    The amount of incident light that will pass through a filter
  24. What is photopic vision?
    normal light vision
  25. What color do humans see best in low light levels?
    blue
  26. What is hue?
    The pure spectrum color; ROYGBIV
  27. What is chroma?
    The strength of a color
  28. What is additive color?
    Using two or more sources to create multiple colors
  29. What is subtractive color?
    Using a filter to remove unwanted wavelengths from a single source
  30. color filter in lighting
    gel
  31. What is photometrics?
    Photometrics is the study of the properties of light, particularly intensity, using math
  32. What is the formula to calculate beam diameter?
    • D=mf*td
    • (multpling factor) * (throw distance)
  33. Why do par lamps have 2 mf values?
    there beams are oval
  34. What does TD stand for
    Throw distance
  35. If you determine you need 6.2 fixtures to cover the width of a stagehow many fixtures would you use?
    7 fixtures
  36. What formula is used to determine intensity of a light source?
    • fc = pc / td2
    • foot candles = peak candela divided by the throwdistance squared
  37. What does the transmission value of a filter tell you?
    The percentage of incident light that passes through a filter
  38. How do you determine the fc of a light that is using a non-standard lamp?
    • find the fc output with the standard information
    • peak candela from manufactor
  39. What is the 80% rule?
    not to exceed 80% of the available power.
  40. What does the rating of a disconnect mean?
    100A, 200A, 400A, 600A and 800A
  41. What is the voltage across hot legs in a three phase system?
    208v
  42. How many hot legs in a three phase system?
    3
  43. Dimmer Curve –
    The relationship between the console fader level and the dimmer voltageoutput to the fixture
  44. How does a magnetic circuit breaker work?
    high votage creats stonrgh mag feild
  45. What are the standard gauges of feeder cable?
    • 4/0
    • 2/0
  46. What are standard dimmer tpyes?
    porabale touriug premanut
  47. What is a hard wired circuit?
    premanted install
  48. What does hard patch mean?
        phyical pluggin in
  49. What is an SCR and what does it do?
    • silicon controlled rectifier  
    • blocks to "gate" the ac sine wave and control the voltage to the filament of the light source
  50. How does a reverse phase dimmer work?
    chopps down slope of sine wave
  51. What does LTP stand for?
    last takes peridance
  52. What is the significance of the BREAK and MAB?
    Break is a LO signal (0) and the MAB is a HIsignal (1); the Break and MAB also serve as a “reset” between packets.
  53. What revision of DMX is in use today?
    dmx 512
  54. How do receivers know what information to respond to?
    The address that a device is given lets itknow which channels of information it needs to respond to
  55. What is the minimum voltage difference needed to trigger a change in state?
    DMX is a +/- 12v system but a device only needs to receive a differential of 1/5th of a volt fora valid change of state to be detected.
  56. What are two ways to store a look in a memory console?
    RECORDING A CUE
  57. How many fader channels and total chanes on the Element 40-500?
    • 120
    • 500
  58. What does blind mode allow you to do?
    make changes wihtout being seen
  59. What are the two models of the ETC Element
    • 4500
    • 6500
  60. What is the easiest way to record a submaster on the Element?
    [Record] [Sub] [#] [Enter]
  61. What is the primary purpose of stage lighting?
    provide visibility
  62. How can you create visual movement?
    Transitions between cuesserve to punctuate the action of the show
  63. What must a Lighting Designer be able to do as they read a script?
    visulatize the scene
  64. What information should the Costume Designer provide?
    colors and textures
  65. What is the purpose of the first script reading?
    find lights need and visual cues
  66. What information should the Costume Designer provide?
    clothing colors, and texures
  67. What is the Lighting Concept Statement?
    concept should incorporate the director’s vision and spell out howthe lighting is going to visually represent that vision. The first part of the concept conciselystates what the piece is about. Next is a description of the environment and how thatenvironment is being created. Now comes the director's vision Any imagery they have usedto describe their interpretation of the script should be included. Finally write a description ofhow the lighting is going to show all of the things discussed. This description should notcontain any fixture or other technical information, rather it should be about representing theethereal with the concrete.
  68. Why is the Concept Statement important?
    so you have a road map, rehfernce
  69. What should be included in cue notations in a script?
    actions time weather ect
  70. What is a cue list?
    a list of every cue
  71. What are on stage lighting pipes called?
    elctrics
  72. How are on stage lighting pipes numbered?
    ds to us
  73. How are these house lighting positions numbered?
    house right to left
  74. What are three types of vertical lighting positions?
    boom  - box boom -
  75. How are on stage vertical positions numbered?
    floor up
  76. How are in house vertical positions numbered?
    fool up
  77. What is the reference point for dimensions on a pipe?
    center
  78. How are lighting fixtures on a vertical position numbered?
    floor up
  79. What is the reference point for dimensions on a vertical position?
  80. Why is the notes section important?
  81. What does CCD stand for?
  82. What type of light would you want to use for a key light?
    white or pink
  83. What type of fixture would make a good fill light?
  84. What is color temperature?
  85. Why do you need to white balance a camera?
  86. What is color correction?
  87. When would you use a camera filter for color correction?
  88. What are the best colors to use when lighting people for video?
    n/c
  89. What is the contrast ratio?
    diff dark ans lights
  90. What is lens flare?
  91. How is the instrument schedule organized?
    Listing of each fixture sorted by Hang Position and Unit number;
contains channel, circuit, dimmer, focus, color, accessory and fixture information. Used for
focus and troubleshooting
  92. What is the channel hook-up used for?
    Used for troubleshooting and to assist in patching circuits and soft patching the 
console
  93. How is the dimmer hook-up organized?
    dimmer #
  94. What is the dimmer hook-up used for?
    Used for troubleshooting and to assist in patching circuits and soft patching the console
  95. How should a shop order be organized?
    name of show- date- designer info-general manger- master elcetric- load in date - retrun date- notes
  96. Why do you need to include an equipment breakdown by position?
    list everything wanted for a show by the show hang postion
  97. What is an expendable item?
    item not rented
  98. What is one way to lay out the console?
    gruops
  99. Why is it a good idea to skip numbers when writing cues?
    to add cues
  100. What is a loft block?
    The pulley directly over the load onstage, guides the lift line
  101. What is a head block?
    The pulley over the fly rail, guides operating line and lift lines
  102. How do you attach weight to a hemp rigging system?
    porset knot - trim clamp - 
clew
  103. how does the fire curtain operate if no one is around?
    fire melt lead link
  104. What is the diagonal brace?
    Smaller diameter tubing that forms the lacing of the truss.
  105. What is the end plate?
    The coupling system for the truss.
  106. What is a gusset connection?
    end conntion peces
  107. What is a spigot coupler?
    hinge joint
  108. What is a round sling used for?
    A long continuous loop of nylon chord surrounded by a rip-stopjacket that is used rig truss
  109. What agency regulates safety in the workplace?
    osha

What would you like to do?

Home > Flashcards > Print Preview