Triggers

Card Set Information

Author:
koonedog
ID:
181052
Filename:
Triggers
Updated:
2012-10-31 23:26:26
Tags:
A320 checklist triggers USAirways
Folders:

Description:
A320 checklist triggers
Show Answers:

Home > Flashcards > Print Preview

The flashcards below were created by user koonedog on FreezingBlue Flashcards. What would you like to do?


  1. Crew Briefing
    After assembling the crew no later than 40 minutes (domestic) and 50 minutes (international) before deparure.
  2. Read and do the "Safety & Power On Checklist"
    If electrical power is not established on the aircraft
  3. Flight Deck Equipment Flow
    If the first flight of the day, after a crew change, prior to an oceanic flight, or when the flight deck has been left unattended and not in view of a pilot crew member.
  4. Accomplish Exterior Inspection
    Every Flight
  5. Accomplish flight deck preparation flow
    If the first flight of the day, after a crew change, prior to an oceanic flight, or when the flight deck has been left unattended and not in view of a pilot crew member.
  6. Record ATIS information
    Request clearance
    Set the initial altitude
    Set the transponder code
    Every flight
  7. Cabin Crew Leg Brief
    Review the flight release, TPS, weather package, and all pertinent Jeppesen pages
    Set communication/navigation frequencies/courses (if required) for departure

    Enter FMS routing if PF
    When flight paperwork is received
  8. Complete ATC route clearance verification

    Ensure GMT correct and enter into ATSU/ACARS the following:
    flight number
    departure/destination
    enroute flight time
    payroll numbers
    After FMS routing is loaded
  9. Start APU (if not already running)
    Verify IRS alignment and position
    Approximately 15 minutes prior to departure and after Route Verification completed.
  10. Departure Briefing- Brief if PF
    After fuel slip is received.
  11. Before start checklist
    When flight release electronic acceptance message is received (approximately 11 minutes prior to departure)
  12. Make welcome aboard announcement
    Accomplish jumpseat briefing (if applicable)
    Approximately 10 minutes prior to departure
  13. EXT Pwr - Off
    Give the POWER OFF/OUT command signal
    When ready to disconnect the air and/or power
  14. Establish communications with ground personnel
    Approximately 6 minutes prior to departure
  15. Accomplish before pushback flow
    After receiving the cabin ready notification and all doors are closed and armed
  16. Start appropriate engine
    When cleared to start engine
  17. Accompish after start flow
    After ground equipment is clear, first officer verbally acknowledges the captain's wands up signal statement, and engine(s) are stabilized
  18. Flaps-ensure commanded position
    After completing the after start flows
  19. Accomplish Taxi Flow
    After departing the gate, final weight and balance received, and both engines running
  20. Accomplish before taking the runway flow
    Approximately 1-3 minutes prior to taking the runway

What would you like to do?

Home > Flashcards > Print Preview