Ethernet Specifications

Card Set Information

Author:
peeojay
ID:
181656
Filename:
Ethernet Specifications
Updated:
2016-03-28 08:25:23
Tags:
Ethernet Specifications
Folders:

Description:
IEEE Ethernet Specifications
Show Answers:

Home > Flashcards > Print Preview

The flashcards below were created by user peeojay on FreezingBlue Flashcards. What would you like to do?


  1. Thinnet
    10Base2

    10Mbps

    • 185 meters
    • 30 WKS on a single segment
    • Attachment Unit Interface (AUI)
    • Uses BNC connector
  2. Thicknet
    10Base-5

    • 10Mbps
    • 500 meters
    • AUI connectors

    • 2500 meters repeaters
    • 1,024 users
  3. 10Base-T
    10Mbps

    • CAT3 UTP
    • RJ-45 connector
  4. Fast Ethernet
    IEEE 802.3u

    100Base-TX

    • EIA/TIA CAT 5, 5e or 6 UTP two-pair wiring
    • 100 meters (328')
    • RJ-45 connector
  5. 100Base-FX
    IEEE 802.3u

    • Fiber cabling
    • 62.5/12.5 micron MMF
    • 412 meters
    • ST/SC connector
  6. Twinax
    • IEEE 802.3z
    • 1000Base-CX

    • Copper twisted pair
    • 25 meters
    • 9 pin connector (High Speed Serial Data Connector - HSSDC)
  7. 1000Base-T
    IEEE 802.3ab

    • CAT 5, four pair UTP
    • 100 meters (328')
  8. 1000Base-SX
    IEEE 802.3z

    Gigabit Ethernet over MMF
  9. 1000Base-LX
    IEEE 802.3z

    • SMF using 9 micron core
    • 3km - 10km
  10. 10GBase-T
    IEEE 802.3an

    10Gbps connection over UTP CAT 5e, 6, or 7
  11. 10GBase-SR
    10 Gigabit ethernet using short-wavelength laser @ 850nm over MMF.

    Max xmit distnace btwn 2-300meters (990')
  12. 10GBase-LR
    10Gigabit using long-wavelength laser @ 1310nm over SMF.

    Max xmit distance btwn 2-10km (6 miles).
  13. 10GBase-ER
    10 Gigabit Ethernet over SMF

    Extra long wavelength @ 1550nm

    Longest xmit distance 2-40km
  14. 10GBase-SW
    IEEE 802.3ae

    This is a mode using 10GBase-S over MMF w/850nm laser

    300 meters

    Connects to SONET
  15. 10GBase-LW
    10GBase-L supporting link length of 10km over SMF

    Connects to SONET
  16. 10GBase-EW
    Mode 10GBase-E supporting link length up to 40km over SMF

    Connects to SONET
  17. What type of cabling is used, typically, for short distance applications; such as composite video between two nearby devices?  What impedance value does it have?
    • RG-59
    • 75 ohm impedance value
  18. What does RG stand for?
    Radio Guide
  19. What type of cabling is used by local cable companies to connect individual homes to its distribution network?  What impedance value does it have?
    • RG-6
    • 75 ohm impedance
  20. What cabling was popular during the early use of 10base2 Ethernet networks?  What impedance does it use?
    • RG-59
    • 50 ohm impedance

What would you like to do?

Home > Flashcards > Print Preview