The flashcards below were created by user
ktess06
on FreezingBlue Flashcards.

This law states that the total power dissipated in a circuit is the product ofthe voltage applied to the circuit and the total current flowing in the circuit.Therefore,P = VI. Using other forms of Ohm's law, P = I^2*R or P = V^2/R
Watt's law

This is the term used to describe the rate at which energy is used. In an electrical circuit, it is the heat generated by the circuit components. It is denoted by P and measured in units of Watts (W).
Power

This law states that the algebraic sum of all voltages around a single closed loop is the zero. In other words, the sum of voltage drops across each component equals the total voltage applied to the circuit.
Kirchhoff's Voltage Law

This is used to designate a circuit that has only one path for the flow of current. The current through each of the resistors in this circuit is the same.The total resistance for this circuit is the sum of the individual resistances.
Series circuit

This law describes the relationship between the current, voltageĀ in electric circuits. There are three different ways this law can be expressed:I = V/R, R = V/I and V = IR
Ohm's law

V = I x R (Voltage = Current x Resistance)
Ohm's Law Equation

P = V x I (Power = Voltage x Current)
Power equation

