7 Level CDCs

Card Set Information

Author:
Flyboi
ID:
196302
Filename:
7 Level CDCs
Updated:
2013-01-31 08:19:50
Tags:
Volume Two URE
Folders:

Description:
Yes
Show Answers:

Home > Flashcards > Print Preview

The flashcards below were created by user Flyboi on FreezingBlue Flashcards. What would you like to do?


  1. Training detachments (TDs) are administratively assigned to which MAJCOM
    A. Air Combat Command (ACC).
    B. Air Reserve Command (AFRC).
    C. Air Education and Training Command (AETC).
    D. Air Training Command (ATC).
    C. AETC
    (this multiple choice question has been scrambled)
  2. The block training method is normally used to teach which Maintenance Training Flight(MTF) training course?
    A. Any 7-level course.
    B. Weight and Balance.
    C. Maintenance Orientation.
    D. General Technical Order System
    C. Maintenance Orientation
    (this multiple choice question has been scrambled)
  3. How often must the Maintenance Operations Officer/Maintenance Superintendent review and sign the special certification roster (SCR)?
    A. Monthly.
    B. Quarterly.
    C. Annually.
    D. Semi-annually.
    D. Semi-annually
    (this multiple choice question has been scrambled)
  4. In order to be given authority to downgrade a “Red-X” an individual must be approved bythe maintenance group commander (MGX/CC) and hold the minimum grade of
    A. TSgt.
    B. MSgt.
    C. SMSgt.
    D. CMSgt.
    B. MSgt
    (this multiple choice question has been scrambled)
  5. Training Business Area (TBA) provides Air Force personnel with global, real-time
    A. visibility of available formal training courses Air Force-wide.
    B. access to Distance Learning courseware.
    C. access to special certification roster criteria listings.
    D. visibility of technical qualifications, certifications, and training statuses of personnel
    D. visibility of technical qualifications, certifications, and training statuses of personnel
    (this multiple choice question has been scrambled)
  6. In the Training Business Area (TBA), what type of notification does the “System Messages”board provide in addition to software releases, projected downtimes, and training updateinformation?
    A. System upgrades.
    B. Changes to your user roles.
    C. Open suspenses.
    D. Application problems.
    D. Application problems.
    (this multiple choice question has been scrambled)
  7. What training phase has these four sub-phases: multiphase, MAJCOM mandatory, freeflow,and maintenance qualification training?
    A. III.
    B. I.
    C. II.
    D. IV.
    C. II
    (this multiple choice question has been scrambled)
  8. What continuation training consists of academic and practical hands-on courses thatcomplement initial skills training received through AETC mission ready airman (MRA) andtraining detachment (TD) courses?
    A. Ancillary.
    B. On-the-job.
    C. Maintenance qualification.
    D. Maintenance refresher.
    C. Maintenance Qualifications
    (this multiple choice question has been scrambled)
  9. How often does the maintenance training flight (MTF) provide a status of training (SOT)briefing to the maintenance group commander (MXG/CC)?
    A. Quarterly.
    B. Monthly.
    C. Annually.
    D. Semiannually.
    B. Monthly
    (this multiple choice question has been scrambled)
  10. An individual comes due for a training re-certification while TDY, on leave, or incapacitated. Provided it has not been more than 60 days since the original due date, how many days are allowed after returning before de-certification is required
    A. 15.
    B. 45.
    C. 30.
    D. 60.
    C. 30
    (this multiple choice question has been scrambled)
  11. Who is responsible for conducting an interview with both the trainee and his/her supervisor before a trainee starts a career development course (CDC)?
    A. Maintenance training flight commander (MTF/CC) or chief.
    B. Group commander.
    C. Operations officer.
    D. Unit training manager.
    D. Unit training managerĀ 
    (this multiple choice question has been scrambled)
  12. Manpower authorizations are
    A. unfunded.
    B. funded.
    C. unvalidated.
    D. both funded and unfunded.
    B. funded
    (this multiple choice question has been scrambled)
  13. A meeting to discuss manning issues in the maintenance group (MXG) is normally held
    A. weekly.
    B. quarterly.
    C. monthly.
    D. semiannually
    C. monthly
    (this multiple choice question has been scrambled)
  14. The maximum continuous duty time you can schedule your workers for without getting maintenance group commander (MXG/CC) approval is
    A. 15 hours.
    B. 14 hours.
    C. 12 hours.
    D. 13 hours.
    C. 12 hours
    (this multiple choice question has been scrambled)
  15. Maintenance group commanders are the final approval authority for exceeding a 12-hour shift up to
    A. 18 hours.
    B. 15 hours.
    C. 16 hours.
    D. 14 hours.
    C. 16 hours
    (this multiple choice question has been scrambled)
  16. Which agency is normally responsible for monitoring the overall maintenance supply interface and resolving supply support problems?
    A. Maintenance data system analysis.
    B. Maintenance supply support.
    C. Maintenance operations center.
    D. Maintenance supply liaison.
    D. Maintenance supply liaison
    (this multiple choice question has been scrambled)
  17. Maintenance supply liaison personnel report directly to the commander of the
    A. Aircraft Maintenance Squadron (AMXS).
    B. Maintenance Operations Squadron (MOS).
    C. Maintenance Squadron (MXS).
    D. Logistics Readiness Squadron (LRS).
    D. Logistics Readiness Squadron (LRS)
    (this multiple choice question has been scrambled)
  18. Which of the following is not normally a Maintenance Supply Liaison duty?
    A. Soliciting and consolidating inputs to initiate a quick reference list.
    B. Collecting and turning in expendable, excess, and surplus precious metal bearing assets
    C. Advising supervisors on supply management documents.
    D. Monitoring status of back-ordered requisitions.
    B. Collecting and turning in expendable, excess, and surplus precious metal bearing assets
    (this multiple choice question has been scrambled)
  19. The assets in a high priority mission support kit (HPMSK) should be transferred into the host base’s Standard Base Supply System account after how many days?
    A. 30.
    B. 60.
    C. 15.
    D. 45.
    A. 30
    (this multiple choice question has been scrambled)
  20. Which expendability, recoverability, and reparability codes (ERRC) must be assigned to an asset before it can be placed in bench stock?
    A. XD1.
    B. XF3.
    C. XB3.
    D. XD2.
    C. XB3
    (this multiple choice question has been scrambled)
  21. The goal for bench stock assets is to establish levels to provide how many days of supply?
    A. 90.
    B. 60.
    C. 120.
    D. 30.
    D. 30.
    (this multiple choice question has been scrambled)
  22. Provided it is still serviceable, which type of shelf life item are you allowed to inspect andre-mark with a new expiration date?
    A. I.
    B. IV.
    C. III.
    D. II.
    D. II.
    (this multiple choice question has been scrambled)
  23. Who in the maintenance group (MXG) is responsible for ensuring the capability exists to meet local manufacture requirements?
    A. Maintenance Squadron (MXS) Operations Officer/Maintenance Superintendent (MX SUPT).
    B. MXG Deputy Commander.
    C. MXG Commander.
    D. MXG Superintendent.
    A. Maintenance Squadron (MXS) Operations Officer/Maintenance Superintendent (MX SUPT).
    (this multiple choice question has been scrambled)
  24. What agency acts as a central repository of engineering drawings and other engineering data?
    A. AF Primary Standards Laboratory.
    B. Engineering Data Service Center.
    C. Audio Visual Center.
    D. Communication and Information System.
    B. Engineering Data Service Center
    (this multiple choice question has been scrambled)
  25. Which of the following is not an obvious sign of pollution?
    A. Stressed vegetation.
    B. Cloudy water.
    C. Oil sheen on standing water.
    D. Stains on ground.
    B. Cloudy Water
    (this multiple choice question has been scrambled)
  26. Who is responsible for developing a hazard communication (HAZCOM) training plan to notify personnel of all known hazards they may be exposed to in a particular workcenter?
    A. Squadron safety monitor.
    B. Section supervisor.
    C. Squadron commander.
    D. Operations officer.
    B. Section Supervisor
    (this multiple choice question has been scrambled)
  27. Which tag should you use to document that a part has been properly drained and/or purged?
    A. AFTO Form 20, Caution Tag.
    B. DD Form 1574, Serviceable Tag-Material.
    C. DD Form 1577–1, Unserviceable (Condemned) Tag-Material.
    D. DD Form 1577–2, Unserviceable (Reparable) Tag.
    A. AFTO Form 20, Caution Tag.
    (this multiple choice question has been scrambled)
  28. Who must appoint an individual to be an equipment account custodian?
    A. Squadron Commander.
    B. Operations Officer/Maintenance Superintendent (MX SUPT).
    C. Section supervisor.
    D. Flight Commander/Chief.
    A. Squadron Commander
    (this multiple choice question has been scrambled)
  29. What specific block of supply training must an individual receive before assuming duties as a due-in from maintenance (DIFM) monitor?
    A. III.
    B. IIB.
    C. I.
    D. IIA.
    B. IIB
    (this multiple choice question has been scrambled)
  30. What form is used to document all report of surveys (ROS)?
    A. AF IMT 453, Report of Survey Register.
    B. AF IMT 1185, Statement of Record Data.
    C. DD Form 362, Statement of Charges/Cash Collection Voucher.
    D. DD Form 200, Financial Liability, Investigation of Property Loss.
    D. DD Form 200, Financial Liability, Investigation of Property Loss.
    (this multiple choice question has been scrambled)
  31. Which Logistics Readiness Squadron (LRS) office accounts for special purpose recoverable authorized maintenance (SPRAM) assets managed on in-use detail records?
    A. Equipment Liaison Office (ELO).
    B. Command Equipment Management Office (CEMO).
    C. Defense Reutilization and Marketing Office (DRMO).
    D. Flight Service Center (FSC).
    A. Equipment Liaison Office (ELO).
    (this multiple choice question has been scrambled)
  32. Unless delegated, who is responsible for reviewing all requests for special purpose recoverable authorized maintenance (SPRAM) authorizations submitted by SPRAM custodians?
    A. Mission Support Group (MSG) commander.
    B. Maintenance Group (MXG) commander.
    C. Maintenance Group (MXG) deputy commander.
    D. Logistics Readiness Squadron (LRS) commander.
    A. Mission Support Group (MSG) commander
    (this multiple choice question has been scrambled)
  33. Which Precious Metals Indicator Code (PMIC) indicates that an item of supply contains a combination of two or more precious metals?
    A. C.
    B. P.
    C. A.
    D. G.
    B. C
    (this multiple choice question has been scrambled)
  34. Which supply tracking document provides information on all document numbers processed during the day?
    A. D23, Repair Cycle Asset Management List.
    B. D04, Daily Document Register.
    C. D18, Priority Monitor Report.
    D. M–24, Organization Effectiveness Report.
    B. D04, Daily Document Register.
    (this multiple choice question has been scrambled)
  35. Which supply tracking document is produced daily and lists all back-ordered parts with an urgency of need (UND) code of A?
    A. M–24, Organization Effectiveness Report. d. D23, Repair Cycle Asset Management List.
    B. D18, Priority Monitor Report.
    C. D04, Daily Document Register.
    B. D18, Priority Monitor Report
    (this multiple choice question has been scrambled)
  36. Which supply tracking document provides a management product for monitoring issue and bench stock supply support?
    A. M–24, Organization Effectiveness Report. d. D23, Repair Cycle Asset Management List.
    B. D04, Daily Document Register.
    C. D18, Priority Monitor Report.
    A. M-24, Organization Effectiveness Report
    (this multiple choice question has been scrambled)
  37. Who must authorize temporary storage of in-transit classified material in cargo security cages and alarmed rooms?
    A. Aircraft commander.
    B. Mission Support Group commander.
    C. Operations Group Commander.
    D. Host installation commander.
    D. Host Installation commander
    (this multiple choice question has been scrambled)
  38. When the aircraft owner or user does not stay with an aircraft which has secret orconfidential equipment installed, she/he must arrange for security checks to be accomplishedevery
    A. 3 hours.
    B. 4 hours.
    C. 2 hours.
    D. hour.
    A. 3 hours
    (this multiple choice question has been scrambled)
  39. Who is the final authority for reviewing a unit’s list of supply assets requiring functionalcheck, calibration, or operational flight programming?
    A. Flight commander/Chief.
    B. Maintenance Group commander.
    C. MX Operations Officer (MOO)/maintenance superintendent (MX SUPT).
    D. Logistics Readiness Squadron (LRS) Chief Inspector.
    D. Logistics Readiness Squadron (LRS) Chief Inspector.
    (this multiple choice question has been scrambled)
  40. Who is responsible for determining the appropriate supply delivery priority for a partsrequest?
    A. Maintenance Supply Liaison.
    B. Logistics Readiness Squadron (LRS) Customer Service.
    C. Customer.
    D. Maintenance Supply support.
    C. Costumer
    (this multiple choice question has been scrambled)
  41. Which urgency justification codes (UJCs) are used to show a supply request for bits andpieces to repair a line replaceable unit (LRU) or shop replaceable unit (SRU) spare?
    A. AR or BR.
    B. BM or CM.
    C. AA or AM.
    D. 1A or JA.
    A. AR or BR
    (this multiple choice question has been scrambled)
  42. Before a supply point can be established and located in a maintenance work area, who mustMaintenance coordinate with?
    A. MXG Maintenance Data System Analysis.
    B. LRS material management element.
    C. Logistics Readiness Squadron (LRS) Flight Service Center.
    D. Maintenance Group (MXG) Quality Assurance.
    B. LRS material management element.
    (this multiple choice question has been scrambled)
  43. Once established, how often must supply point accounts be reconciled by the workcentersupply point monitor?
    A. Annually.
    B. Monthly.
    C. Quarterly.
    D. Semiannually.
    D. Semiannually
    (this multiple choice question has been scrambled)
  44. When a mission capable (MICAP) part issues and is placed in the tail number bin (TNB),supply personnel notify the
    A. Maintenance Operations Center (MOC).
    B. Aircraft Section flight chief.
    C. Operations Officer.
    D. Aircraft Maintenance Unit’s (AMU) Plans, Scheduling, and Documentation (PS&D) dedicatedscheduler.
    A. Maintenance Operations Center (MOC).
    (this multiple choice question has been scrambled)
  45. When the goal is to get a refund or a new item in exchange, what type of deficiency reportis submitted?
    A. Deficiency Report (DR).
    B. Maintenance cross-tell report.
    C. Product Quality Deficiency Report.
    D. Supply Discrepancy Report.
    D. Supply Discrepancy Report.
    (this multiple choice question has been scrambled)
  46. Who has the responsibility for overall Deficiency Report program management for thesubmitting organization or group?
    A. Screening Point.
    B. Originating Point.
    C. Originator.
    D. Action Point.
    B. Originating Point.
    (this multiple choice question has been scrambled)
  47. Who acts as the Deficiency Report focal point between the support point and submittingorganization?a. Originator.b. Action Point.c. Screening Point.d. Originating Point.Who acts as the Deficiency Report focal point between the support point and submittingorganization?a. Originator.
    b. Action Point.
    c. Screening Point.
    d. Originating Point.
    b. Action Point.
  48. Once a Category I deficiency is discovered, a deficiency report (DR) must be submitted tothe Screening Point within
    A. 16 hours.
    B. 8 hours.
    C. 24 hours.
    D. 32 hours.
    C. 24 hours
    (this multiple choice question has been scrambled)
  49. Which is not normally a Maintenance Group (MXG) technical order distribution office(TODO) duty?
    A. Advising MXG/CC on TO availability.
    B. Establishing technical order distribution account (TODA) sub-accounts as required.
    C. Assisting units in establishing additional TODO accounts.
    D. Resolving TO availability problems.
    B. Establishing technical order distribution account (TODA) sub-accounts as required.
    (this multiple choice question has been scrambled)
  50. What Maintenance Operations Flight section is responsible for periodically reviewingmaintenance information system (MIS) products to ensure proper documentation andmanagement of time compliance technical orders (TCTOs) by owning and managing agencies?
    A. Maintenance Operations Center.
    B. Maintenance Supply Liaison.
    C. Maintenance Management Analysis.
    D. Plans, Scheduling, and Documentation.
    D. Plans, Scheduling, and Documentation.
    (this multiple choice question has been scrambled)
  51. The Product Improvement Manager is usually assigned to what maintenance group (MXG)section?
    A. Maintenance Operations Center.
    B. Engine Management.
    C. Maintenance Data System Analysis.
    D. Quality Assurance.
    D. Quality Assurance.
    (this multiple choice question has been scrambled)
  52. Which of the following is not a technical order (TO) change priority category?
    A. Routine.
    B. Emergency.
    C. Standard.
    D. Urgent.
    C. Standard
    (this multiple choice question has been scrambled)
  53. Who has the overall responsibility for AF policy governing the TO system?
    A. A4U.
    B. A4YE.
    C. A4MT.
    D. A4BM
    A. A4U
    (this multiple choice question has been scrambled)
  54. Who designates cannibalization authorities?
    A. MXG Superintendent.
    B. Maintenance Squadron (MXS) Operations Officer/Maintenance Superintendent (MX SUPT).
    C. Maintenance Group (MXG) Commander.
    D. MXG Vice Commander.
    C. Maintenance Group (MXG) Commander
    (this multiple choice question has been scrambled)
  55. If a serially controlled item is cannibalized (CANN), the CANN authority is required tonotify
    A. Quality Assurance.
    B. Maintenance Management analysis (MMA).
    C. Programs and Resources Flight.
    D. Plans, scheduling, and documentation (PS&D).
    D. Plans, scheduling, and documentation (PS&D).
    (this multiple choice question has been scrambled)
  56. Which of the following does not institute a restricted maintenance area?
    A. Aircraft on jacks.
    B. Fuel system repair.
    C. Radiographic inspections.
    D. Weapons loading operations.
    D. Weapons loading operations.
    (this multiple choice question has been scrambled)
  57. Red Ball maintenance is not designed to prevent
    A. aircraft status changes.
    B. air aborts.
    C. late takeoffs.
    D. ground aborts.
    A. aircraft status changes.
    (this multiple choice question has been scrambled)
  58. Who designates the Impoundment Official for a particular impoundment situation?
    A. Maintenance Group (MXG) Vice Commander.
    B. Applicable Squadron commander.
    C. MXG Impoundment Release Authority.
    D. Applicable Impoundment Authority.
    D. Applicable Impoundment Authority.
    (this multiple choice question has been scrambled)
  59. Who is the office of primary responsibility (OPR) for development of wing procedures forcontrol and management of tools/equipment used on the flight line and in aerospace maintenanceindustrial areas?a. Wing Commander (WG/CC).
    b. Wing Vice Commander (WG/CV).
    c. Maintenance Group Commander (MXG/CC).
    d. Maintenance Group Deputy Commander (MXG/CD).
    d. Maintenance Group Deputy Commander (MXG/CD).
  60. How many digits make up an equipment identification designator (EID) code used toidentify tools and equipment?
    A. 9.
    B. 11.
    C. 8.
    D. 10.
    A. 9
    (this multiple choice question has been scrambled)
  61. The Wing foreign object damage (FOD) monitor is normally located within the
    A. Maintenance Flight.
    B. Quality Assurance section.
    C. Engine Management section.
    D. Maintenance Operations Center.
    B. Quality Assurance section
    (this multiple choice question has been scrambled)
  62. The wing foreign object damage (FOD) monitor must notify the MAJCOM FOD managerwithin how many hours of a FOD incident?
    A. 8.
    B. 48.
    C. 24.
    D. 12.
    C.24
    (this multiple choice question has been scrambled)
  63. Which of the following, if inadvertently dropped during aircrew operations, is notconsidered a dropped object under the Dropped Object Prevention Program?
    A. Explosive munitions.
    B. Safety pin.
    C. Panel.
    D. Bolt.
    A. Explosive munitions
    (this multiple choice question has been scrambled)
  64. A dropped object that has resulted in casualties or property damage must be reported IAW
    A. AFI 91–221, Weapons Safety Investigations and Reports.
    B. AFI 10–2510, USAF Emergency Notification Signals.
    C. AFI 91–224, Ground Safety Investigations and Reports.
    D. AFI 10–206, Operational Reporting.
    D. AFI 10–206, Operational Reporting
    (this multiple choice question has been scrambled)
  65. Which AF publication provides general guidance for executing an effective maintenancerecovery operation?
    A. AFTTP 3–21.1, Aircraft Maintenance.
    B. AFI 10–403, Deployment Planning and Execution.
    C. AFI 21–101, Aircraft and Equipment Maintenance Management.
    D. AFI 33–103, Requirements Development and Processing.
    C. AFI 21–101, Aircraft and Equipment Maintenance Management
    (this multiple choice question has been scrambled)
  66. Who is the Quality Assurance (QA) Chief Inspector directly responsible to for ensuring therequired Maintenance Standardization and Evaluation Program (MSEP) functions are performed?
    A. Wing Inspector General.
    B. MAJCOM Inspector General.
    C. Maintenance Group Deputy Commander (MXG/CD).
    D. Quality Assurance (QA) Officer In Charge (OIC)/Superintendent (SUPT).
    D. Quality Assurance (QA) Officer In Charge (OIC)/Superintendent (SUPT).
    (this multiple choice question has been scrambled)
  67. When a unit has received an unsatisfactory Maintenance Standardization and EvaluationTeam (MSET) rating, the maintenance group commander (MXG/CC) directs Quality Assurance(QA) to perform a follow-up inspection on the unit within how many days?
    A. 30.
    B. 90.
    C. 60.
    D. 120.
    A. 30
    (this multiple choice question has been scrambled)
  68. What Maintenance Standardization and Evaluation Team (MSET) individual assessment isan over-the-shoulder evaluation while the technician performs a task?
    A. Special Inspection.
    B. Management Inspection.
    C. Personnel Evaluation.
    D. Quality Verification Inspection.
    C. Personnel Evaluation
    (this multiple choice question has been scrambled)
  69. What Maintenance Standardization and Evaluation Team (MSET) individual assessment isperformed after a technician completes a task?
    A. Management Inspection.
    B. Personnel Evaluation.
    C. Quality Verification Inspection.
    D. Special Inspection.
    C. Quality Verification Inspection.
    (this multiple choice question has been scrambled)
  70. In regards to the modification management program, which agency serves as the operator’sinterface with the single point manager for a weapons system?
    A. Lead command.
    B. Quality Assurance.
    C. Inspector General.
    D. Air Force Mobility Command.
    A. Lead command
    (this multiple choice question has been scrambled)

What would you like to do?

Home > Flashcards > Print Preview