CCNA VOIP CLI

Card Set Information

Author:
boultonm
ID:
218937
Filename:
CCNA VOIP CLI
Updated:
2013-05-10 12:53:11
Tags:
VOIP
Folders:

Description:
Hard CLI syntax from CH 1-9
Show Answers:

Home > Flashcards > Print Preview

The flashcards below were created by user boultonm on FreezingBlue Flashcards. What would you like to do?


  1. detail the following in CLI.
    2 lines extensions 1000 and 1001
    phone 1 mac add x.x.x 
    button 2 extension 1000
    phone 2 mac add y.y.y 
    button 2 ext. 1000
    button 3 extension 1001
    •  config t
    • ephone-dn 1
    • number 1000
    • ephone-dn 2
    • number 1001
    • ephone 1
    • mac add x.x.x
    • button 2:1
    • ephone 2
    • mac add y.y.y
    • button 2:1
    • button 3:2
  2. detail cli (CME) syntax for associating a ephone to a dn.

    ephone dn 3
    ephone 1
    button #2
    mac address cccc.bbbb.aaaa
    • config t
    • ephone 1
    • mac-address cccc.bbbb.aaaa
    • button 2:3
  3. detail CLI (CME) syntax for assigning a mac address to an ephone.
     
    • conf t
    • ephone 1
    • mac-address *mac* 

    verify with sh ephone
  4. detail CLI (CME) syntax for single line and dual line setup.
    • conf t
    • ephone-dn 1
    • number 1000
    • exit
    • ephone-dn 2 dual-line
    • number 1001
    • exit
  5. Detail CLI input (CME) for basic IP Phone config.
     
    • config t
    • telephony-services
    • ip source-address 172.16.1.1
    • max-ephones 10
    • max-dn 20
  6. detail DHCP setup procedures using CLI on CME.
    192.168.1.0/24
    exclude .1-.9
    name VOICE_SCOPE
    default router is 192.168.1.1
    TFTP server is 192.168.1.5
    • conf t
    • ip dhcp excluded-address 192.168.1.1 192.168.1.9
    • ip dhcp pool VOICE-SCOPE
    • network 192.168.1.0 255.255.255.0
    • default-router 192.168.1.1
    • option 150 192.168.1.5
  7. detail vlan setup.
    voice vlan 10
    data vlan 20
    • conf t
    • int fa0/1
    • switchport mode access
    • switchport access vlan 20
    • switchport voice vlan 10
    • spanning-tree portfast
    •  
    •  
  8. You want extension 1000 (ephone-dn 5) to be the third line button on a Cisco 7961 ip phone (ephone 12).  What syntax does this?
    • config t
    • ephone-dn 12
    • button 3:5
  9. What is the simplest way for an ephone-dn to  respond to both an internal extension and a call from outside (10 digit number - 4805551001)?
    assign a secondary number using the num cmd.

    • ephone-dn 2
    • dual-line number 1001 secondary 4805551001
    •  
  10. What is required in CME (minimal) to prepare rtr to accept IP phone registrations?
    • conf t
    • ip source-address 172.16.1.1
    • max-ephones 40
    • max-dn 60

    • Note:  IP add and numbers are for example.
    •  
    •  
  11. Describe setting up a router for use with CCP.
    • conf t
    • username ninja privlege 15 secret cisco
    • int fa 0/0 ip add *x.x.x.x y.y.y.y*
    • no shut
    • exit
    • ip http server
    • ip http secure server (rtr generates RSA keys)
    • line vty 0 4
    • login local
    • transport input telnet ssh

    (telnet and ssh are two seperate entities, unsecure and secure connections)
  12. Detail how to setup calls to go to receptionist using PLAR. 

    port 2/0/0
    port 2/0/1
    ext 1500
    • conf t
    • voice-port 2/0/0
    • connection plar 1500
    • exit
    • voice-port 2/0/1
    • connection plar 1500
    • exit
  13. Detail PLAR cli syntax

    voice port 0/0/0 dn num 1102
    • config t
    • voice-port 0/0/1
    • connection plar 1102

    • as soon as user lifts handset, ext 1102 is dialed. Private Line Automatic Ringdown
    •  
  14. Detail voip dial peer using CLI 
    extension block 2...
    ip address of outbound port 10.1.1.1
    ip address of other end port 10.1.1.2
    codec g711ulaw
    • config t
    • dial-peer voice 2000 voip
    • destination-pattern 2...
    • session target ipv4:10.1.1.2
    • codec g711ulaw
    •  
    •  
  15. Detail CME CLI for the following.

    phone 1  x1101  fxs 0/0/0
    phone 2  x1102  fxs 0/0/1

    call each other.
     
    • config t
    • dial-peer voice 1101 pots
    • destination-pattern 1101 port 0/0/0

    • dial-peer voice 1102 pots
    • destination-pattern 1102 port 0/0/1


    • verify:  sh dial-peer voice summ
    • debug: debug voip dialpeer
  16. Detail CLI for configuring the CME rtr as a Web Server.
    • conf t
    • ip http server
    • ip http secure-server (rsa keys are generated)
    • ip http path flash:/gui
    • ip http authentication local  

    • next:  setup CME Web Admin Account and Permissions
    • conf t
    • web admin system name NINJA secret 0
    • cisco dn-webedit  (this allows DN changes in the website, off by default)
    • time-webedit  (this allows time changes by website, off by default)
  17. detail after-hours block patterns.

    any long distance
    any international
    dial 9 to start
    any 900 number   24/7
     
    • conf t
    • telephony-services
    • after-hours block pattern 1 91……….
    • after-hours block pattern 2 9011T
    • after-hours block pattern 3 91900……. 7 * 24
  18. detail CLI syntax for after hours block
    Sat and Sun all day
    Mon and Tue block 1700 to 0800
    block xmas all day
    • config t
    • telephony-service
    • after-hours day sat 00:00 00:00
    • after-hours day sun 00:00 00:00
    • after-hours day mon 17:00 8:00
    • after-hours day tue 17:00 8:00
    • after-hours date dec 25 00:00 00:00
  19. detail cli syntax for setting up unicast paging. 

    dn 80 number 5555
    group members: ephone 1, ephone 2
    • conf t
    • ephone-dn 80
    • number 5555
    • paging
    • exit
    • ephone 1
    • paging-dn 80
    • exit
    • ephone 2
    • paging-dn 80
    • exit 


    bonus info:  you can also multicast, ephones listen for a certain ip address for paging.

    • CLI syntax:
    • ephone-dn 80
    • paging ip 239.1.1.100 port 2000  

    • network must be configured to support multicast.
    •  
  20. detail CLI syntax for intercom setup  

    dn 60 A100  label the other end (A101 “Manager”)

    dn 61 A101  label the other end (A100 “Assistant”)
     
    • conf t
    • ephone-dn 60
    • number A100 intercom A101 label “Manager”
    • exit
    • ephone-dn 61
    • number A101 intercom A100 label “Assistant”
    • exit
    • ephone 1
    • button 2:60
    • restart
    • ephone 2
    • button 2:61
    • restart  

    Note: intercom uses speed-dial and autoanswer (in mute) speed-dial.
  21. detail call pickup CLI syntax.  

    group 5509
    dn 1
    dn 2  

    group 5510
    dn 3
    dn 4
    • conf t
    • ephone-dn 1
    • pickup-group 5509
    • ephone-dn 2
    • pickup-group 5509  
    • exit
    • ephone-dn 3
    • pickup-group 5510
    • ephone-dn 4
    • pickup-group 5510 

    • Note: when you assign the first ephone to a group, CME creates the call pickup group for you. 
    •  
  22. Detail CLI syntax to permit transfers to a certain range of numbers outside your locally managed CME.  

    pattern 5...

    pattern 9..........
    • conf t
    • telephony-service
    • transfer-pattern 5...
    • transfer-pattern 9..........
  23. detail CLI call transfer setup for full consult.
    • conf t
    • telephony-service
    • transfer-system full-consult
  24. detail steps for call forward from CLI.

    dn 21 fwd to 1599  25 seconds rining  


    bonus.  what are the call forward options in the CLI?
    • conf t
    • ephone-dn 21
    • call-forward busy 1599
    • call-forward noan 1599 timeout 25  

    bonus.  all, busy, noan, max-length, night-service
  25. detail configuring CME local directory.

    dn 20  Mike Bell

    dn 21 Sue Ball
     
    • config t
    • ephone-dn 20
    • name Mike Bell
    • exit
    • ephone-dn 21
    • name Sue Ball
    • exit
    •  

What would you like to do?

Home > Flashcards > Print Preview