studio control monitoring, VT, CG

Card Set Information

Author:
kelc0104
ID:
219126
Filename:
studio control monitoring, VT, CG
Updated:
2013-05-11 18:52:13
Tags:
rtvf
Folders:

Description:
rtvf
Show Answers:

Home > Flashcards > Print Preview

The flashcards below were created by user kelc0104 on FreezingBlue Flashcards. What would you like to do?


  1. video tape machines in studio control
    5. VT 11 is mini-DV; VT 15 is S-VHS; VT 13, 16 and 17 are DVCPRO. Then, xclyps, profile, and dvd recorder
  2. two general uses for VT machines
    playback and recording
  3. dubs (duplicate copies)
    VT 11 and 15 are sometimes used for dubs but all 5 VT machines can be used to record or make dubs. dvd recorder burns dubs of finished projects.
  4. difference between playout servers
    XClyps is able to process video files sent directly from other computers. the profile can only record in real time video coming from the router.
  5. VTP
    tape machine playback. VTR is tape machine recording.
  6. monitor rack
    rack 16 center monitors fed directly by the Pesa router panel below them
  7. monitor audio
    turn up single volume control of the Wohler speaker system to about the 9:00 position. keep balance switch set to middle to monitor both channels of audio
  8. set up of DVCPRO
    video in- analog, cmpst. audio in-analog. REMOTE for avid digitizing; LOCAL for recording of shows/dubs or manual playback
  9. from avid to xclyps
    transcoding. send to xclyps, export as quicktime movie, sample rate 48 kHz, size 16 bit
  10. xclyps watch folder
    converts quicktime movie to .ltv file used by XClyps
  11. to clear clip from channel
    right click on channel output, click on CLEAR OUTPUT
  12. to record directly from router
    F5
  13. re-cue to beginning of clip
    F1
  14. change to channel 2
    ALT F1
  15. Change to channel 1
    ALT F2
  16. play
    F2
  17. pause
    F3
  18. stop
    F4
  19. enter clip id to cue then F2 to play
    SHIFT F4
  20. enter clip id to cue and play clip
    SHIFT F5
  21. delete
    F9
  22. close program
    ALT F4
  23. camera icon
    change thumbnail
  24. to copy clip to a different ID
    SAVE AS COPY
  25. will lose old number unless SAVE AS COPY
    SAVE WITH NUMBER
  26. to trim IN and OUT points of a clip
    START, END
  27. click on > next to start
    SCRUB to IN
  28. SCRUB to OUT
    click on > next to END
  29. can enter loop point other than IN point
    LOOPING

What would you like to do?

Home > Flashcards > Print Preview