The flashcards below were created by user Anonymous on FreezingBlue Flashcards.

  1. There are how many levels of maintenance?
  2. If you work on an aircraft on the flight line,you are doing which level of maintenance?
  3. Who is responsible for managing the wing's quality assurance programs?
    Maintenance group commander
  4. Who is responsible for ensuring compliance with the wing environmental protection agency program?
    Squadron commander
  5. Who is responsible to the squadron commander for maintenance production?
    Maintenance supervisor
  6. Who is responsible to the maintenance supervisor for the leadership,supervision,and training of assigned personnel?
    Shift leader
  7. Which flight is part of a maintenance squadron?
  8. Quality maintenance is the responsibility of maintenance technicians,supervisors,and commanders who work in concert with?
    Quality assurance
  9. The integrated maintenance data system (IMDS) training management subsystem can be used to monitor?
    Upgrade training
  10. Which is the correct method for writing 30 January 2011?
  11. A symbol entered on a maintenance form reflects the opinion of the?
    Individual making the entry
  12. When a new air force technical order (AFTO) form 781 A is initiated, what kind of discrepancies cannot be transferred to the AFTO form 781 K?
    Red X
  13. The AFTO form 244 is used to document discrepancies and corrective actions for?
  14. The five authorized inspection concepts used by the air force are?
    Periodic,phase,isochronal,programmed depot maintenance, airline/manufacturer maintenance
  15. Which inspection is used to detect defects that could have developed during ground operation of an aircraft?
  16. Reducing the time an aircraft is out of commission is an objective of which inspection?
  17. Which is a thorough and searching inspection?
  18. Which is not one of the elements of the maintenance training program?
    Cross-utilization training
  19. The primary responsibility for formal upgrade training rests with?
    The commander
  20. what technical order explains the material deficiency reporting system?
  21. A category II, product quality deficiency report that has been submitted for a defect in workmanship must be forwarded to the screening point within?
    3 workdays
  22. The first part of a national stock number indicates the?
    Supply classification
  23. The second position of the expendability/recoverability/reparability/category (ERRC) designator code indicates?
    Repair level
  24. Bench stock supplies should be replenished when the authorized quantity on-hand drops below what amount?
  25. Air force property responsibility is imposed by law on?
    All military and civilian employees
  26. What types of property responsibility can be charged to department of defense personnel?
    Command and custodial
  27. An airman who signs out a toolbox assumes which type of property responsibility for that toolbox?
  28. Which publications are considered working handbooks?
    Air force manuals
  29. The list of applicable publications (LOAP) lists technical orders that apply to?
    A specific aircraft
  30. Which TO explains how to maintain and inspect a particular weapons system?
    Operations and maintenance
  31. A series of red X's printed around the border of the first page of a time compliance TCTO signifies?
    An immediate action TCTO
  32. Want TO explains the TO numbering system?
  33. IN the basic TO numbering system, what is the minimum groups of numbers each TO will have?
  34. The first number group within a TO number identifies the?
    TO category
  35. The MIDAS page number is?
    A six-digit numbering system expressed as three elements of two digits each
  36. Which kind of TO contains ops ck's?
    Job guide
  37. while using a wiring diagram you locate a malfunctioning component to get the part # you would check the wiring diagram's?
    Reference designator
  38. Revisions are issued when changes exceed what percentage of the basic TO?
  39. Safety supplements to TO's are identified with a border of?
    Red SS's on the title page
  40. Which deficiency report is used for a TO deficiency that involves safety or the unit mission?
  41. Personnel at the air logistics center (ALC) activity must act on an emergency AFTO form 22 report within how many hours of receipt?
  42. How for away from parked aircraft should LOX carts be stored?
    75 feet
  43. When you are servicing an aircraft with LOX do not wear?
    Shoes which fit loosely around the top
  44. Liquid nitrogen must be stored below what minimum temperature to remain in a liquid state?
    -320.8 F
  45. What type of tasks may you perform in the immediate area of explosives?
    Mission critical
  46. What must you ensure when you are transporting squibs?
    The squibs are in a protective container
  47. How much electrical current does it take to cause muscle paralysis?
    .015 amps
  48. For personnel electrostatic discharge grounding, you must use a skin contact wrist strap connected to the workbench surface. This strap must have a resistance of at least?
    1 megohm
  49. Which situation illustrates a physical hazard presented by a chemical hazard?
    Second degree skin burn
  50. What is the minimum information required on a hazardous chemical inventory?
    Name of the material
  51. which element must be included in a workplace written hazard communication program?
    Hazardous material inventory
  52. Which air force publication is a source of information for the prevention of accidents?
    Air force instruction (AFI) 91-202
  53. What should be the main concern when planning the layout of any shop area?
  54. What is considered to be a safe distance in front of jet engine intake ducts?
    25 feet
  55. Which mishap prevention tag is used to warn personnel against potential hazards?
  56. Which AF form is used to report ground safety accidents involving personnel( not aircraft)?
    AF form 711B
  57. High-frequency radiation is not produced by?
    Nuclear weapons
  58. Which type of nuclear radiation is the most deadly?
  59. What is a temporary storage location designed to store nuclear materials in transit through a base called?
    Safe haven
  60. Which safety standard of the nuclear surety program includes a pre-task briefing?
    Prevent nuclear explosions
Card Set:
2013-06-05 13:19:45

study for eoc
Show Answers: