F50

The flashcards below were created by user 1261 on FreezingBlue Flashcards.

Discontinued engine start
No NH
- Star PB - off
- Do not re-start
Discontinued engine start
No light up within 10 sec
- Fuel lever - shut
- 15 sec after shut
- Start PB - off
Discontinued engine start
High ITT
- Fuel lever - shut
- Start PB - off
- If ITT limits exceeded:
- Do not restart
Discontinued engine start
NH not in green after 60 sec
- Fuel lever - shut
- Start PB - off
Runaway during engine start
- ENG EC - man
- Eng normal:
- Eng EC - reset
- NH high again:
- Eng EC - man
- Dispach ok
- NH remains high
- Fuel lever - shut
Start fault
- When press PB:
- Start PB - off
- No start possible
- If NH green:
- Start PB - off then on
- Reset ok - continue
- Reset not ok:
- Start PB - off
- Fuel lever - shut
Engine TQ fluctuations
- Power levers - retard 30%
- ENG EC - MAN
cont...
Engine TQ high
- Power levers - retard
- TQ - adjust
- TQ remains high:
- Shutdown proceduer - apply
Engine oil pressure not in green
- Power lever - FLT idle then detent
- varies > 5psi?
- Shutdown proc.
- Varies < 5psi?
- Report to maint
- Press is high?
- Report to maint
Fuel filter

Report to maint
Fuel temp high/low

Report to maint
ERP fault
- ERP - GA
- TQ bugs - MAN
- Reset to ERP inop tables
- Power levers - adjust
cont...
EEC fault
- ENG EC - chech fault and MAN
- Fault only:
- Power levers - retard until EEC MAN
- EEC - push x 2 to reset
- Reset ok:
- power levers - re-adjust
- Reset not ok:
- EEC - MAN
- Power levers - re-adjust
cont...
Degraded EEC
- Power levers - retard 30%
- ENG EC - push x 2 to reset
- Reset ok:
- Power lever - adjust
- Reset not ok:
- Power lever - adjust
- Report to maint
Prop EC fault
- Prop EC - off then on
- Reset not ok:
- Prop EC - off
- NP goes to 104%
- Max speed 220 KTAS
- Go-around TQ 4% below bugs
- If NP not stable:
- Shutdown procs - apply
Jet pipe fire
- Fuel lever - shut
- Fuel pumps - off
- Start PB - on
- Eng select - L or R
- After fire out:
- Start PB - off
Blow-out run
- Fuel pumps - on
- Fuel lever - Shut
- Start PB - on
- Eng select - L or R
- after 15 sec:
- Start PB - off
- Fuel pumps - off
Shutdown
- Power lever - FLT idle
- Fuel lever - shut
- If req:
- ERP - MCT
cont....
Air start
- Fuel lever - check shut
- power lever - check flt idle
- ERP - MCT or CLB or CRZ
- Ignition - on
- Start PB - on
- Engine select - L or R
cont...

Author

1261

22928

Card Set

F50

Description

QRH abnormal procedures

Updated

2010-06-10T04:51:41Z

Show Answers