AMR ASSIGNMENT 1 MAINTENANCE ADMIN

Card Set Information

Author:
fishphinfan
ID:
230018
Filename:
AMR ASSIGNMENT 1 MAINTENANCE ADMIN
Updated:
2013-08-17 12:36:45
Tags:
MAINTENANCE ADMIN
Folders:

Description:
AMR 1
Show Answers:

Home > Flashcards > Print Preview

The flashcards below were created by user fishphinfan on FreezingBlue Flashcards. What would you like to do?


  1. An important objective of the NAMP is to
    achieve and maintain maximum material
    readiness. Which of the following
    statements reflects additional objectives of
    the NAMP?
    Safety and conservation of material
  2. What is the purpose of the Aircraft
    Maintenance Department within an
    organization?
    • Maintain assigned aircraft in a
    • Full-Mission-Capable state in support
    • of the units mission
  3. What are the major types of aircraft
    maintenance?
    Rework and upkeep
  4. Restorative work performed on an item of
    support equipment is considered what
    type(s) of work?
    Rework maintenance
  5. A comprehensive depot-level inspection of
    selected aircraft structures and materials
    and correction of any critical defects is
    what type of maintenance?
    Standard rework
  6. Maintenance performed on aircraft or
    equipment to improve its specific function
    is known as what type of maintenance?
    SPECIAL REWORK
  7. Preventive, restorative, or additive work
    performed on aircraft, equipment, and
    support equipment by an operating unit is
    what type of maintenance?
    Upkeep
  8. Scheduled work is performed on an aircraft
    as a result of its completing a prescribed
    number of flying hours. What type of
    maintenance is this?
    Standard upkeep
  9. The ability of an aircraft to perform its
    mission was changed by alteration without
    regard to flying hours. What type of
    maintenance is this?
    Special upkeep
  10. Aircraft maintenance is divided into what
    total number of maintenance levels?
    3
  11. Centralized local maintenance is performed
    by which of the following activities?
    AIMDs
  12. Work performed by an operating unit on a
    day-to-day basis in support of its own
    operations is known as what type of
    maintenance?
    Organizational-level maintenance
  13. Servicing aircraft and preflight inspections
    are actions that are performed at what level
    of maintenance?
    Organizational
  14. Work performed in a centrally located
    facility within a geographical area is known
    as what type of maintenance?
    Intermediate-level maintenance
  15. Work performed at an industrial-type
    facility is known as what type of
    maintenance?
    Depot-level maintenance
  16. The Naval Aviation Maintenance Program
    is sponsored and directed by what
    command?
    CNO
  17. Material and technical support for the
    NAMP are provided by the cognizant
    systems command and which of the
    following commands?
    NAVSUP
  18. What type of relationship exists between a
    superior and a subordinate?
    Line
  19. According to directives from higher
    authority, what officer directs the aircraft
    maintenance department?
    The aircraft maintenance officer
  20. The functional management responsibilities
    for the planning, control, and production of
    the aircraft maintenance department rest
    with which of the following officers?
    Aircraft maintenance officer
  21. Which of the following officers ensures that
    staff divisions at the organizational level
    conform to established policies?
    The assistant aircraft maintenance officer
  22. Assuring that high quality maintenance
    work is performed is a function of what
    division in an organizational-level
    maintenance department?
    QUALITY ASSURANCE
  23. Which of the following maintenance
    concepts allows you to regulate events
    rather than be regulated by them?
    PREVENTION
  24. Within an organizational-level maintenance
    activity, what part of the activity monitors,
    controls, and applies the MDS?
    System administrator/analysis
  25. What officer is directly responsible for the
    overall production effort and material
    support of the organizational-level
    maintenance department?
    • The maintenance material control
    • officer
  26. What branch or division is known as the
    nerve center of an organizational-level
    maintenance department?
    Maintenance control
  27. The power plants, airframes, and aviator’s
    life support equipment branches belong to
    what division of an organizational-level
    maintenance department?
    Aircraft Division
  28. If you work in electronics, instruments, or
    armament, you are normally assigned to
    what division of an organizational-level
    maintenance department?
    Avionics/armament
  29. In an intermediate-level maintenance
    activity, what is the central point of the
    maintenance effort?
    production control
  30. Normally, the intermediate maintenance
    organization has a total of how many
    production divisions?
    six
  31. What system provides organizational and
    intermediate maintenance activities with a
    computer-based management information
    system?
    NALCOMIS
  32. If a check flight is required after the
    completion of a corrective action,
    notification must be given to what
    individual?
    THE QAO
  33. A component goes into an AWP status at
    the intermediate level of maintenance.
    What action is completed first with regard
    to the component?
    PACKAGED AND PRESERVED
  34. Information entered on MDS forms must
    always meet which of the following
    requirements?
    ACCURATE AND COMPLETE
  35. An organizational code, the Julian date, a
    sequence number, and a suffix are part of
    what code or control number?
    JCN
  36. Maintenance was performed on an item
    identified by a Work Unit Code. What type
    of code describes this action?
    ACTION TAKEN
  37. What type of code identifies a subassembly
    repair action that is completed separately
    from the major component repair action?
    JCN
  38. What type of code identifies the system,
    specific engine, or component/part on
    which work is being performed?
    EUC
  39. What type of code describes the trouble or
    cause of trouble in a system or component?
    MAL CODE
  40. What code is often referred to as the
    manufacturer’s code?
    CAGE
  41. A0An aircraft has 479 flight hours on it since
    new. You have just removed and replaced
    a damaged canopy. What entry should you
    place in the Time/Cycles block on the
    VIDS/MAF?
    A0479
  42. A Technical Directive Status code consists
    of how many characters?
    ONE
  43. SE Custody and Maintenance History
    Record, OPNAV 4790/51, is used for
    which of the following purposes?
    • To record custody and transfer
    • information 
    • To provide rework and overhaul data 
    • To identify applicable and
    • incorporated technical directives
  44. On initiation of each new OPNAV 4790/51,
    reporting custodians retain the latest
    processed copy from the permanent
    custodian. A current copy is also
    maintained with any accumulated data
    transcribed to it.
    TRUE
  45. What document provides scheduled control
    of the predictable maintenance workload?
    MMP
  46. At the organizational level, what officer
    sets the format and arrangement of the
    monthly maintenance plan?
    AVIATION MAINTENANCE OFFICER
  47. At the organizational level, the MMP is
    distributed by what day of the month prior
    to the month to which it applies?
    25TH
  48. Which of the following information is
    included in the MMP?
    • DATE OF SCHEDUALED INSPECTIONS
    • SCHEDULE OF PRE-INSPECTION MEETINGS
    • DATES OF SCHEDULED RECEIPTS OR TRANSFERS OF AIRCRAFTE AND TYPE OF WORK TO BE DONE ON THESE AIRCRAFT
    • PME CALIBRATION REQUIREMENTS
    • SCHEDULE OF TECHINICAL TRAINING
    • FORCED REMOVAL ITEMS (HIGH TIME)
    • TD COMPLIANCE
    • LIST OF QA PERSONNEL (QAR,CDQAR, CDI)
    • DATE OF SE INSPECTIONS
    • SCHEDULE OF NDI REQUIREMENTS
    • SCHEDULE OF PERSONNEL FOR EJECTION SEAT SAFETY CHECKOUT
  49. To increase technical knowledge levels and
    enhance and improve existing formal
    training through diagnostic testing
    procedures is the primary goal of which of
    the following programs?
    MAINTENANCE TRAINING IMPROVEMENT PROGRAM (MTIP)

What would you like to do?

Home > Flashcards > Print Preview