ccnp sw ch 4

Card Set Information

Author:
boultonm
ID:
230765
Filename:
ccnp sw ch 4
Updated:
2013-08-21 05:02:44
Tags:
ccnp
Folders:

Description:
ch 4
Show Answers:

Home > Flashcards > Print Preview

The flashcards below were created by user boultonm on FreezingBlue Flashcards. What would you like to do?


  1. A VLAN is which of the following?

    a. A collision domain
    b. Spanning-tree domain
    c. Broadcast domain
    d. VTP domain
    c
  2. Switches provide VLAN connectivity at which layer of the OSI
    model?

    a. L1
    b. L2
    c. L3
    d. L4
    b
  3. Which one of the following is needed to pass data between
    two PC’s, each connected to a different VLAN?

    a. L2 switch
    b. L3 switch
    c. Trunk
    d. Tunnel
    b
  4. Which Catalyst IOS cmd is used to assign a port to a VLAN?

    a. Access vlan 10
    b. Switchport access vlan 10
    c. Vlan 10
    d. Set port vlan 10
    b
  5. Which of the following is a standardized method of trunk
    encapsulation?

    a. 802.1d
    b. 802.1Q
    c. 802.3z
    d. 802.1a
    b
  6. Which of the Cisco proprietary method of trunk
    encapsulation?

    a. CDP
    b. EIGRP
    c. ISL
    d. DSL
    c
  7. Which of these protocols dynamically negotiates trunking
    parameters?

    a. PAgP
    b. STP
    c. CDP
    d. DTP
    d
  8. How many different VLANs can an 802.1Q trunk support?

    a. 256
    b. 1024
    c. 4096
    d. 32,768
    e. 65,536
    c
  9. Which of the following incorrectly describes a native VLAN?

    a. Frames are untagged on an 802.1Q trunk
    b. Frames are untagged on an ISL trunk
    c. Frames can be interpreted by a nontrunking host
    d. The native VLAN can be configured for each
    trunking port
    b
  10. If two switches each support all types of trunk
    encapsulation on a link between them, which one will be negotiated?

    a. ISL
    b. 802.1Q
    c. DTP
    d. VTP
    a
  11. Which VLANs are allowed on a trunk link by default?

    a. None
    b. Only the native VLAN
    c. All active VLANs
    d. Only negotiated VLANs
    c
  12. Which command configures a switch port to form a trunk
    without using negotiations?

    a. Switchport mode trunk
    b. Switchport mode trunk nonnegotiate
    c. Switchport mode dynamic auto
    d. Switchport mode dynamic desirable
    a

What would you like to do?

Home > Flashcards > Print Preview