Digital Test #1

Home > Preview

The flashcards below were created by user Anonymous on FreezingBlue Flashcards.

1. The blackening of the film.
Film Density
2. The difference between adjacent densities.
Contrast
3. The amount of density a film produces for a given amount of exposure.
Film Speed
4. True or False: It takes less exposure to produce a given density with a faster film.
True
5. The range of exposures that produces densities in the diagnostic range.
Exposure Latitude
6. If the characteristic curve for two films were plotted on the same graph, which one would be faster?
The one farthest to the left would represent the faster film.
7. Film screen limitation for density.
An overexposed film appears much too dark. An underexposed film appears much too light.
8. Film screen limitation for contrast resolution.
The contrast resolution number of film is 10. That means that there must be at least a 10% difference in tissue before it will be detected on the radiograph as different shades of gray.
9. Film screen limitation for fixed display.
The display of a film on a view box is fixed, in order to change it the image must be repeated.
10. Film screen limitation for archival requirements.
Manual handling for archival and retrieval. This requires a large storage unit.
11. How does an analog signal become converted into a digital signal?
12. What point is the image in analog and digital form?
• Analog -- electrons on detectors.
• Digital -- After it has been converted by an ADC
13. Convert binary language: 1011
• 1 x 20 = 1
• 1 x 21 = 2
• 0 x 23 = 0
• 1 x 24 = 16

=19
14. A digital image must first be converted to an analog image before it can be displayed on the monitor. How does this happen?
This is accomplished by the digital to analog converter (DAC)
15. When an image is displayed on a monitor, is it analog or digital?
Analog
16. What components make up CR?
• Photostimulable phosphor storage imaging plates.
17. When comparing CR to film/screen imaging, CR has ______ spatial resolution, but _______ contrast resolution.
lower, higher
18. What components make up DR?
• Digital x-ray machine.
• Flat panel detector.
19. When comparing DR to CR, which ofters higher spatial resolution?
DR.

*Film/Screen has the highest of all.
20. When comparing CR, DR, and film/screen, which has the widest exposure latitude?
CD and DR
21. True or False: Under and over exposure to a radiograph no longer produces an image that is too dark or too light when working with digital?
True. Under and over exposures do not effect DR.
22. What is IMACS?
Image Management and Communication Systems. A.K.A PACS.
23. What is PACS responsible for?
It is the system responsible for sending the image from the acquisition modality to the monitor for display and diagnosis.
24. What is QA/QC?
QA/QC activities are designed to ensure patient dose is as low as reasonably achievable, ensure optimal image quality, and reduce operating cost. Test are very manufacturer specific.
25. Keyboard, mice, microphone, touch screens.
Input devices
26. Monitors, printers, speakers.
Output devices
27. Computer takes data from the user and processes it using a machine language of 1s and 0s.
Binary Code
28. If the trasistor circuit is closed and current passes through, it is assigned a value of _______.
1
29. IF the circuit is open and current does not pass through, it is assigned a calue of ______.
0
30. The box has two main functions....
• To hold all of the components in a relatively cool, clean, and safe enviroment.
• To shield the outside environment from the radio frequencies being emitted by the electronic components of the computer.
31. True of False: The box is the brain of the computer?
False. The CPU is the brain of the computer.
32. What is the basic input/output system?
BIOS. BIOS runs the start-up diagnostics on the system.
33. A series of connections, controllers, and chips that creates the information highway of the computer.
The bus.
34. Temporary memory
RAM
35. Memory is measured in....
Bytes
36. What does CMOS use to retain information about the PC's hardware while the computer is turned off?
A small rechargeable or lithium battery.
37. What does a sound card interpret?
WAV files, MP3 files, and MIDI files
38. Enables the PC to connect to other PCs that are on the same network.
Network card.
39. If the computer ever receives a power surge, what is designed to take the brunt of the force?
The power supply.
40. Compare DVD storage to CD storage.
A DVD holds up to 7 times more data than the CD.
41. What are the 3 main types of CD/DVD drives?
• ROM - (Read only memory)
• R - (Write once, read many)
• RW - (Read and write many times)
42. What is a Land and Pit?
• Land - 1 - Reflects
• Pit - 0 - Does not reflect
43. What are the 2 basic types of keyboards?
• Soft -- no sound
• Click -- sound
44. An individual controllable set of dot triads.
Pixel
45. The measurement of how close the dots are located to one another within a pixel.
Dot Pitch
46. True or False: The smaller the dot pitch of a display, the finer the resolution.
True
47. A measure of how fast the monitor rewrites the screen or the number of times that the image is redrawn on the display each second.
Refresh Rate
48. How does refresh rate relate to flicker?
Refresh rate helps control the flicker as seen by the user, the higher the refresh rate the less flicker seen.
49. How does CRT create the image?
Consists of a cathode and anode within a vacuum tube. Cathode boils off a cloud of electrons, and then a potential difference is placed on the tube. A stream of electrons is sent across to the anode, which is the case of the monitor is a sheet of glass coated with a phosphor layer. Electrons then strike the phosphor on the glass, causing glass to emit a color based intensity where most electrons strike. .. does this all in a raster scan pattern
50. How does LCD emit an image?
LCD produces images by shining or reflecting light through a layer of liquid crystal and a series of color filters. When a current is applied to the liquid crystal, it aligns and allows light in varying intensities through to the next layer of glass through color filters. Light forms the colors and images seen on display.
51. How does plasma screens emit an image?
They are made up of many small fluorescent lights that are illuminated to form the color of the image.
52. Compare CRT and LCD.
• CRT -- least expensive, bulky, more luminance than LCD.
• LCD -- More expensive, less of viewing angle, takes up less space.
53. What are the 3 major operating systems?
• Windows by Microsoft
• Macintosh OS
• UNIX / Linux
54. What TYPE of operating system does modern x-ray equipment use?
Real-time OS
55. Two or more objects sharing resources and information.
Network
56. Compare LAN and WAN
• LAN -- local area nonnection. Least expensive.
• WAN -- wide area network. Connects computers that are not physically attached.
57. What are the two typical classifications of networks?
• Peer-to-peer -- Each computer on the network is considered equal.
• Server based -- Centralized computer controls the operations, files, and sometimes the programs of the computer.
• Client based -- Server returns only the results back to the client.
58. A computer that manages resources for other computers, servers, and networked devices.
Server
59. A component found on a network that request services and resources from a server.
Thin Client
60. Computer that can work independently from the network.
Thick Client
61. Similar to TV cable. Center conduction wire surrounded by insulation and grounded shield and braided wire.
Coaxial Cable
62. Wire similar to telephone wire. Used for LAN.
Twisted Pair
63. Uses glass threads to transmit data on a network -- easy to damage.
Fiberoptic Cable
64. Uses infared or radio frequencies. No cable needed.
Wireless
65. Provides the interface between the computer and the network medium.
Network Interface Card
66. Device for connecting several pieces of equipment.
Network Hub
67. Sends data only to those devices to which the data is directed.
Network Switch
68. Physical (wired) connection from one network segment to another.
Network Bridge
69. Directs messages to intended target even it target is on a separate network and uses a different network protocol.
Network Router
70. Address is made up of four octets of numbers. First set indicates the network class.
71. True of False: Network protocols send data from one device to another.
True
72. Needed to understand the basic principles of network communication
OSI Model. Open Systems Interconnection Model.
73. A network in which all devices are physically attached to and listen for communication on one single wire.
Bus
74. Devices are connected in a circle.
Ring
75. Connected to a central hub or switch. Most Common
Star
76. Multiple passageways. What internet uses.
Mesh
77. A device or system that represents changing values as continuously variable physical quantities.
Analog
78. Only can display information in few discrete values.
Digital
79. Numbers that represent shades of gray on a X and Y axis.
Spatial Location Domain
80. A mathematical algorithm that is used to change image data from the spatial location domain to the spatial frequency domain.
The Fouier Transformation
81. Change the image so that is meets the needs of the viewer, usually it facilitates the diagnosis made by the radiologist.
Image Enhancement
82. Improves the quality of images that have been degraded.
Image Restoration
83. Allows for measurements and statistics as well as image segmentation.
Image analysis
84. Reduces the size of the image dile which will then reduce trasder time and storage needs.
Image Compression
85. Each box within the matrix is called a _______.
Pixel
86. A digital image is made up of a 2D array of nubmers called a _________.
Matrix
87. Each pixel represents a 3D volume of tissue known as a _______.
Voxel
88. As pixel size decreases, spatial resolution _________.
Increases
89. As matrix size increases, with field of view remaining the same, pixel size ___________. Therefore spatial resolution ___________.
Decreases, Increases
90. As bit depth increases, more shades of gray are able to be represented and thus, contrast resolution __________.
Increases
91. What are the 3 steps in digitizing an image? How does a ADC fit into these steps?
• 1) Scanning -- scans in a raster pattern.
• 2) Sampling
• 3) Quantization -- An ADC assigns a number to each pixel which is representative of a gray value.
92. A graph of the shades of gray of an image versus the number of pixels containing each shade of gray.
Histogram
93. A mapping function in which all pixels are changed to a new gray value, a method of adjusting image contrast and brightness.
Look Up Table (LUT)
94. The range of the pixel values (shades of gray).
Window Width
95. The center of the range.
Window level
96. Window width controls....
Contrast
97. Window level controls...
Brightness
98. As window level increases , brightness _________.
Decreases.
99. The output image pixel value is calculated using a small area of pixels surrounding the input pixel.
Local Processing Operations
100. Spatial frequency filtering in the spatial location domain is an example of a local processing operation.
Convolution
101. Use all the pixels in the input image to calulate the gray level for one pixel in the output image.
Global Operations
102. Give an example of global processign operations.
Spatial Frequency Filtering
103. What is used to chagne the data into the frequency domain.
The Fourier Transformation.
104. Allows the user to change the position or orientation of pixels.
Geometric Operations
105. A company provides outsourcing of archiving and management functions to the hospital for a pay per use, or pay per month charge.
Application Service Provider
106. Modalities that use a scanner to acquire the image data at full spatial resolution and grayscale
Inherently Digital
107. Digitize the analog signal obtained form the image receptor.
Frame Grabbers
108. The data transfer rate of the network.
Bandwidth
109. Individual device connected via the network.
Node
110. Connection between nodes.
• Telephone modem -- slowest
• Fiber optics -- fastest
112. Ensures access only to those people for whom the information is intended.
Privacy
113. Allows the message recipient to verify the identity of the sender and the sender to verify the identity of the recipient.
Authentication
114. Ensures that the information received has not been altered deliberately or accidentally.
Integrity
115. Consist of a jukebox containing several magnetic or optical disks that are controlled by a robotic arm.
Short term storage
116. Digital Linear tape (DLT) is often used for?
Long term storage
117. Short term and long term storage components can be connected by a sub network called?
Storage Area Network (SAN)
118. Storage that cannot be removed and provides immediate access to images (RAM).
Online Storage
119. Storage is removable and has longer retrieval times (RAID)
Nearline Storage
120. Storage devices that must be retrieved by a person and loaded onto a drive. This is the cheapest form of storage with the largest storage capacity.
Offline Storage
121. What is the purpose of image compression?
To reduce file size, which reduces the storage requirements and transmission time
122. True of False: Because a radiologist is reading an image for primary diagnosis, only images with lossless compression are used.
True
123. The ratio of the storage capacity required for the original image compared to the storage capacity required for the compressed file.
Compression Ratio
124. More pixels are displayed in the vertical direction than in the horizontal direction.
Portrait
125. More pixels are displayed in the horizontal direction than in the vertical direction.
Landscape
126. What is the desirable image display time?
2 seconds
127. PACS is an image based system with _______ as a standard.
DICOM
128. RIS is a text based system with ______ as a standard.
HL7
129. Allows users to remotely access images using internet browser technology.
Web Server
130. How does the number of steps in workflow for film/screen compare to digital?
Fewer steps in digital
131. Current set of standards that allows different modalities within radiology to communicate with each other. Current set of standards.
DICOM
132. What is a DICOM conformance statement?
A statement that describes the capabilities of a device.
133. What is the purpose of UIDs?
To globally identify each image set.
134. Standard for text based systems with health care so that communication between network conponents is possible.
HL7
135. What is the purpose of inegration health enterprise (IHE)?
To facilitate communication between DICOM and HL7.
136. What are the FDA regulations for PACS?
Require manufacturers to submit a pre market approval and registration of both the product and facility.
137. Deals with the use and disclosure of protected health information.
HIPAA
138. Used to send and recieve signals from computers.
Modem
139. Converting a digital signal from the computer into an analog signal that can be sent over a communication link.
Modulation
140. Analog converted to digital.
Demodulation
141. Changing data into information.
Informatics
142. This is replacing traditional paper based health records.
Electronic Health Record (EHR)
143. A database that contains patient demographic information and assists in identifying and locating patient records.
Master Patient Index (MPI)
144. What mandates system security?
HIPAA

Card Set Information

 Author: Anonymous ID: 23763 Filename: Digital Test #1 Updated: 2010-06-16 05:29:09 Tags: Digital Folders: Description: Flash cards for first Digital Test Show Answers:

Home > Flashcards > Print Preview