SSI

Card Set Information

Author:
Mariom1988
ID:
254726
Filename:
SSI
Updated:
2014-01-01 14:14:02
Tags:
ssi computer timing transmission
Folders:
Computer
Description:
SSI timing and transmission
Show Answers:

Home > Flashcards > Print Preview

The flashcards below were created by user Mariom1988 on FreezingBlue Flashcards. What would you like to do?


  1. What does the key word tm describe in SSI?
    tmrepresents the transfer timeout (monoflop time). It is the minimum time required by the slave to realise that the data transmission is complete. After tm, the data line goes to idle and the slave starts updating its data in the shift register.
  2. What does the key word tp describe in SSI?
    ‘tp’ represents the pause time. It is the time delay between two consecutive clock sequences from the master.
  3. What does the key word tw describe in SSI?
    tw represents the repetition time. It is the minimum time elapsed between retransmissions of the same data and is always less than tm.
  4. What does the key word T describe in SSI?
    ‘T’ represents the width of each clock cycle. It is the time taken between two falling or two rising edges in a continuous clock sequence.
  5. What does MSB Stand for in SSI?
    MSB: Most significant bit
  6. What does LSB stand for in SSI?
    LSB: Least significant bit

What would you like to do?

Home > Flashcards > Print Preview