STAB CHECK

Card Set Information

Author:
BWhyGold
ID:
257523
Filename:
STAB CHECK
Updated:
2014-01-20 15:20:02
Tags:
60
Folders:

Description:
60 Check
Show Answers:

Home > Flashcards > Print Preview

The flashcards below were created by user BWhyGold on FreezingBlue Flashcards. What would you like to do?


  1. "Stabilator"
    "Checked" -CP

    (After preforming the following..)
  2. STEP 1:
    A) Stab Indicator should be at ___ DN.
    B) _______ Caution Light should be _____.
    • A) 34 to 42 Degrees.
    • B) STABILATOR; off.
  3. STEP 2:
    A) Press and hold what?
    B) STAB POS indicator should move _______ than displayed in step 1.
    C) _____ and ______ lights should be ____.
    • A) TEST button
    • B) 5 to 12 degrees less
    • C) STABILATOR; CAUTION; ON 
    • (Beeping tone heard as well in both headsets)
  4. STEP 3:
    A) PRESS ON _____.
    B) STAB POS indicator should _______.
    C) _____ and _____ should be _____.
    • A) AUTO CONTROL Switch
    • B) move down to 34 to 42 degrees.
    • C) STABILATOR; CAUTION; OFF
    • (Beeping should be off)
  5. STEP 4:
    A) Pull and hold _____ until ______.
    B) Then _____ and stabilator should ______.
    C) ____ and _____ should be _____.
    D) Press _____ to reset audio tone.
    • A) PILOT'S CYCLIC SLEW-UP switch; until STAB POS trailing edge up 15 degrees.
    • B) Release; stop
    • C) STABILATOR; CAUTION lights; On
    • D) Master Caution
  6. STEP 5: 
    A) Pull and hold _____ until ______.
    B) Then _____ and stabilator should ______.
    • A) COPILOT'S CYCLIC SLEW-UP switch; STAB POS trailing edge up 15 deg.
    • B) Release; stop.
  7. STEP 6:
    A) Up and hold _____ until ______.
    B) ______ should be ______.
    • A) MAN SLEW-UP switch; stabilator stops
    • B) STAB POS indicator; 6 to 10 Degrees Up
  8. STEP 7:
    A) DN and hold ______ until _____.
    A) MAN SLEW switch; STAB POS indicator reads 0 degrees.
  9. STEP 8:
    A) Press On _____.
    B) ______ should move to _______
    C) The ______ should be _____.
    • A) AUTO CONTROL switch
    • B) STAB POS indicator: 34 to 42 degrees Down
    • C) STABILATOR caution light; off
  10. Go through the entire Sequence, eight steps.
    • 1. Check Stab down
    • 2. Test Button- Press and Hold
    • 3. Auto Control Switch- Press
    • 4. Pilots Cyclic Slew up Switch- Pull and Hold
    • 5. Co's Cyclic Slew Up Switch- Pull and Hold
    • 6. Man Slew Switch- Up
    • 7. Man Slew Switch- Dn
    • 8. Auto Control Switch - Press On

What would you like to do?

Home > Flashcards > Print Preview