Insulation 2nd Year

Card Set Information

Author:
Jared26
ID:
258294
Filename:
Insulation 2nd Year
Updated:
2014-02-02 00:08:43
Tags:
insulation
Folders:

Description:
Second Year Cards
Show Answers:

Home > Flashcards > Print Preview

The flashcards below were created by user Jared26 on FreezingBlue Flashcards. What would you like to do?


  1. What percent ratio of time is on the job vs industry training?
    80% vs 20%
  2. Requirements for certification are developed by who on the recommendation of who?
    • Alberta Apprenticeship and Industry Training Board
    • Provincial Apprenticeship Commitee
  3. What are the two main duties of the LAC?
    • Monitor Apprenticeship programs
    • Make recommendations to PAC
  4. What are the two main duties of the PAC?
    • Monitor LAC activities
    • Make recommendations to Board
  5. The                        works with industry, employer, and employee organizations and technical training providers to:__________
    • Alberta Advanced Education and Technology
    • Facilitate industry's development and maintenance of training and certification standards
  6. Who is responsible for Apprenticeship Safety?
    Shared between the government, employers, employees, apprentices, and the public.
  7. Employer required safety training is whose responsibility?
    The employer and the apprentice
  8. Define Annular Space.
    Distance between the penetrating item and the surrounding opening.
  9. Define Backing Material.
    Material used to set the depth of fire stop systems.
  10. Define combustible.
    A material that fails to meet the acceptance criteria.
  11. Define draft stopping.
    Materials used to prevent the movement of air, gasses, and smoke such as red caulking.
  12. Define endothermic reaction.
    Absorption of energy during a chemical reaction.
  13. Define exothermic reaction.
    Production of energy during a chemical reaction.
  14. Define F-rating.
    The time a fire stop system is rated for. (Fire protection rating)
  15. Define Fill, Void, or Cavity Material.
    The fire stop material.
  16. Fire separation.
    A fire wall, floor or ceiling.
  17. Define fire compartment.
    An enclosed space in a building.
  18. Define fire damper.
    A flap in a duct to stop smoke and flame.
  19. Define H-Rating.
    The resistance to fire hose spray during a fire.
  20. Define Intumescent.
    Expands when exposed to heat.
  21. Define L-Rating.
    Measurement of air leakage during a fire.
  22. Define Membrane Penetration.
    An opening made through a fire assembly.
  23. Define Passive Fire Protection.
    A system designed to confine smoke and fire.
  24. Define Point of Contact.
    Where the penetration touches the opening wall.
  25. Define T-Rating.
    The time required for the unexposed surface to rise by 325 degrees.
  26. Define Through Penetration.
    An item passing entirely through a fire wall.
  27. What is the ULC?
    The Underwritings Lab of Canada.
  28. Define the first letter in the Numbering System Penetrations.
    • F - Floor
    • W - Wall
    • C - Combined
  29. Define the second letter in the Numbering System Penetrations.
    • A - Concrete < 5" thick
    • B - Concrete > 5" thick
    • C - Framed Floors
    • J - Concrete / Block Walls < 8" thick
    • K - Concrete / Block Walls > 8" thick
    • L - Framed Walls
  30. Define the Number Series' in the Numbering System Penetrations.
    • 0000 - No penetration item
    • 1000 - Metallic Pipe / Conduit
    • 2000 - Non-Metallic Pipe / Conduit
    • 3000 - Electrical Cables
    • 4000 - Cable Trays
    • 5000 - Insulated Pipes
    • 6000 - Electrical Ducts
    • 7000 - Mechanical Ducts
    • 8000 - Multiple Items
    • (Items cannot be combined)
  31. Define the 1st letter in the Numbering System Joints.
    • FF - Floor to Floor
    • WW - Wall to Wall
    • FW - Floor to Wall
    • HW - Head of Wall
    • CW - Curtain Wall
    • BW - Bottom of Wall
  32. Define the 2nd letter in the Numbering System Joints.
    • D - Dynamic
    • S - Static
  33. Define the Number Series in the Numbering System Joints.
    • 0000 - 2" Joint Width
    • 1000 - 2" to 6" Joint Width
    • 2000 - 6" to 12" Joint Width
    • 3000 - 12" to 24" Joint Width
    • 4000 - > 24" Joint Width

What would you like to do?

Home > Flashcards > Print Preview