CDOT 8.2.txt

Card Set Information

Author:
dlvicens
ID:
263734
Filename:
CDOT 8.2.txt
Updated:
2014-02-24 18:10:37
Tags:
cdot
Folders:

Description:
cdot
Show Answers:

Home > Flashcards > Print Preview

The flashcards below were created by user dlvicens on FreezingBlue Flashcards. What would you like to do?


  1. 1. What are the three types of Vservers in clustered Data ONTAP 8.2? (choose all that apply)

    A. System Vserver
    B. Node Vserver
    C. Admin Vserver
    D. Data Vserver
    E. Management Vserver
    F. Cluster Vserver
    B C D
  2. 2. What is considered a node in clustered Data ONTAP?

    A. An HA (high available) storage controller pair
    B. A single storage controller
    C. A data vserver
    D. A data port
    B
  3. 3. What is the maximum number of nodes supported for clustered Data ONTAP 8.2 serving only NAS protocols?

    A. 1
    B. 2
    C. 4
    D. 6
    E. 16
    F. 24
    F
  4. 4. What is the maximum number of nodes supported for clustered Data ONTAP 8.2 serving SAN and NAS protocols?

    A. 1
    B. 2
    C. 4
    D. 6
    E. 8
    F. 24
    E
  5. 5. In clustered Data ONTAP, which object exposes data to clients?

    A. A high-available pair of storage controllers
    B. An admin vserver
    C. A node vserver
    D. A data vserver
    D
  6. 6. Which LIF is associated with the admin vserver?

    A. Admin LIF
    B. Data LIF
    C. Cluster management LIF
    D. Cluster LIF
    E. Node management LIF
    C
  7. II. Installation and Configuration

    7. Which of the following shells are part of a Data ONTAP cluster? (choose all that apply)

    A. Management
    B. Admin
    C. System
    D. Node
    E. Cluster
    F. Advanced
    C D E
  8. 8. Which of the following Vserver types are created automatically by the cluster setup process? (choose all that apply)

    A. Management
    B. Admin
    C. Cluster
    D. Node
    E. Data
    F. Diagnostic
    B D
  9. 9. Which of the following protocols can be used to obtain the clustered ONTAP 8.2 software image? (choose all that apply)

    A. NFS
    B. FTP
    C. TFTP
    D. HTTPS
    E. HTTP
    F. CIFS
    B C E
  10. 10. What is the default shell for accessing clustered Data ONTAP?

    A. Diagnostic
    B. Node
    C. Cluster
    D. System
    E. Admin
    C
  11. 11. Which built-in user can access the system shell?

    A. admin
    B. root
    C. diag
    D. vserver-admin
    C
  12. 12. What is the default cluster shell account?

    A. root
    B. administrator
    C. user
    D. admin
    D
  13. 13. Which of the following privilege levels are found in clustered data ONTAP? (Choose all that apply)

    A. admin
    B. advanced
    C. diagnostic
    D. system
    E. cluster
    A B C
  14. 14. In clustered Data ONTAP, which prompt verifies that you are in the cluster shell if the cluster is named “netappu”?

    A. netappu-01%
    B. netappu-01>
    C. netappu-01::>
    D. netappu::>
    D
  15. 15. In which shell can administrators natively run Data ONTAP 7-mode commands?

    A. node shell
    B. system shell
    C. cluster shell
    D. admin shell
    E. diag shell
    A
  16. 16. Which of the following make up the replicated database (RDB) rings in a cluster? (choose all that apply)

    A. Protocol management daemon (protdb)
    B. Management (mgwd)
    C. Administration (admdb)
    D. Volume location database (vldb)
    E. Virtual-interface manager (vifmgr)
    F. Logical-interface manager (lifmgr)
    G. SAN management daemon (bcomd)
    B D E G
  17. 17. With regards to maintaining cluster quorum, epsilon functions as a:

    A. Master node
    B. Duplicated management database
    C. Secondary node
    D. Tie-breaker
    D
  18. 18. Which of the following is true about the storage module?

    A. Handles NAS and SAN Protocols
    B. Serves data to clients
    C. Manages WAFL, RAID and Storage
    D. Manages V-servers
    C
  19. 19. If a cluster is in quorum, what is the minimum number of participating nodes that must be healthy?

    A. Two thirds
    B. Simple majority
    C. Three quarters
    D. Half
    B
  20. 20. The root volume of a node in the cluster is named

    A. vs_root
    B. mhost
    C. rootvol
    D. vol0
    D
  21. 21. Which of the following statements is true about the cluster session manager? (Choose all that apply)

    A. Handles networking, NFS, and CIFS
    B. Provides a communication mechanism between any network module or SCSI module and any data module
    C. Provides a reliable transport for SpinNP traffic
    D. Is used regardless of whether the network module or SCSI module and data module are on the same node or different nodes
    B C D
  22. 22. Which of the following statements is true about epsilon?

    A. There is a specific epsilon for each replicated database unit
    B. If the node with epsilon is rebooted, epsilon will automatically move to another available node
    C. Epsilon can be moved manually
    D. Epsilon cannot be moved manually
    C
  23. Physical and Logical Data Storage

    23. NAS clients see junctions as ______________ in the parent volume.

    A. Vservers
    B. Nodes
    C. Sub-Volumes
    D. Directories
    D
  24. 24. When a client goes through a junction, the client has entered:

    A. A different Vserver
    B. A different volume
    C. A different junction
    D. A different cluster
    B
  25. 25. Select the following statements that are true about unplanned storage failover (SFO). (Choose all that apply)

    A. The “down” system is entirely virtually hosted by the HA partner and appears to be “up”.
    B. The data LIFs are always migrated to the HA partner
    C. The surviving partner assumes ownership of the failed partners aggregates
    D. The volume location database (VLDB) is updated with the new location of the aggregates and volumes
    C D
  26. 26. Which of the following statements is true about giveback with storage failover?

    A. The surviving partner returns ownership of all the aggregates all at the same time to its partner node
    B. The surviving partner returns ownership of the all the aggregates and the data LIFS to its partner
    C. The surviving partner returns ownership of the root aggregate first followed by the other aggregates to its partner node
    D. I/O only resumes when all aggregates are returned to the partner node
    C
  27. 27. Junctions are used to join volumes to …

    A. Form a namespace
    B. A node vserver
    C. UNIX clients
    D. CIFS clients
    A
  28. 28. Which of the following statements is true about a Flash Pool?

    A. A 32 bit or 64 bit aggregate containing SSDs and HDDs
    B. A 32 bit aggregate containing SSDs and HDDs
    C. A 64 bit aggregate containing SSDs and HDDs
    D. A 64 bit aggregate containing only SSDs
    C
  29. 29. FlexCache volumes in clustered ONTAP 8.2

    A. Are fully provisioned
    B. Can have Snapshot copies
    C. Can be moved
    D. Are sparsely-populated volumes
    D
  30. 30. In clustered Data ONTAP 8.2, an aggregate by default is _________.

    A. 32 bit, RAID DP, Snapshot reserve 0
    B. 32 bit, RAID 4, Snapshot reserve 0
    C. 64 bit, RAID 4, Snapshot reserve 0
    D. 64 bit, RAID DP, Snapshot reserve 0
    D
  31. 31. What is the minimum number of disks in a non-root aggregate with RAID-DP

    A. 2
    B. 3
    C. 5
    D. 8
    E. 12
    C
  32. 32. A volume is created named vs2_vol2 on aggregate netappu-02. It is mounted in the vs2 namespace at /vs2/vol2. Volume move moves this volume to the netappu-01 aggregate. What is the path to this volume after the move?

    A. /netappu-01/vs2/vs2_vol2
    B. /vs2/vol2
    C. /vol/vs2_vol2
    D. /vol/vs2/vs2_vol2
    B
  33. 33. What is aggregate relocation (ARL)? Choose all that apply.

    A. Provides zero copy, non-disruptive relocation of (non-root) online SFO aggregates to a partner node
    B. Provides zero copy, non-disruptive relocation of (root) online CFO aggregates to a partner node
    C. Is utilized during planned events such as fast negotiated takeovers, controller hardware upgrades, and other maintenance operations
    D. Is utilized during unplanned events such as controller failure
    A
  34. 34. The aggregate relocation feature allows an administrator to move a __________.

    A. Data aggregate to any node
    B. Root aggregate to any node
    C. Data aggregate to the HA partner
    D. Root aggregate to the HA partner
    C
  35. Physical and Virtual Networking

    35. From the output of the command “network interface show”, the logical interface that has a value of “false” under the “Is Home” column signifies it (choose all that apply)

    A. Is disconnected
    B. Has failed over
    C. Is administratively disabled
    D. Has been migrated
    E. Is currently being migrated to home node
    B D
  36. 36. Which of the following logical interfaces have failover and migration capabilities between nodes? (choose all that apply)

    A. Data (FC, iSCSI)
    B. Cluster management
    C. Data (CIFS, NFS)
    D. Node management
    E. Cluster interconnect
    B C
  37. 37. What is a LIF? (choose all that apply)

    A. A logical interface connection
    B. A logical inter-fabric connection
    C. May be associated with a IP address
    D. May be associated with a WWPN
    E. May be associated with a interface group
    A C D E
  38. 38. What are the LIF roles that can be assigned to ports in clustered ONTAP? (choose all that apply)

    A. Data
    B. Cluster management
    C. Cluster
    D. Node management
    E. Intercluster
    A B C D E
  39. 39. What are the roles that can be assigned to physical ports in clustered ONTAP? (choose all that apply)

    A. Data
    B. Cluster management
    C. Cluster
    D. Node-management
    E. Intercluster
    A C D E
  40. 40. Which of the following are types of failover groups? (Choose all that apply)

    A. System defined
    B. User defined
    C. Next Available
    D. Priority
    E. Clusterwide
    A B E
  41. 41. Which of the following statements are true about SAN LIFs? (choose all that apply)

    A. SAN LIFs are either up or down
    B. NAS and SAN protocols can share the same LIF
    C. SAN LIFS can migrate or failover
    D. SAN LIFs can be associated with more than one data vserver
    E. NAS and SAN LIFs can share the same data port
    A E
  42. 42. How many cluster nodes are supported by the CN1610 Interconnect Switch in 8.2?

    A. 4
    B. 8
    C. 12
    D. 16
    E. 24
    C
  43. 43. The Cisco Nexus 5010/5020 interconnect switches require ______ISL connections where the CN1610 requires ___________ISL connections.

    A. 4 ISL connections; 8 ISL connections
    B. 8 ISL connections; 8 ISL connections
    C. 8 ISL connections; 4 ISL connections
    D. 4 ISL connections; 4 ISL connections
    C
  44. 44. Which of the following types of LIFs can be assigned a user-defined failover group? (Choose all that apply)

    A. Cluster LIF
    B. Node-management LIF
    C. Cluster management LIF
    D. NAS Data LIF (NFS,CIFS)
    E. SAN Data LIF (iSCSI, FC)
    B C D
  45. NAS Protocols

    45. In clustered Data ONTAP, the NFS mount or the CIFS share path need to contain the following:

    A. Vserver root volume
    B. Absolute path of the volume
    C. Aggregate name for the volume
    D. Junction path for the volume
    D
  46. 46. A volume is created named “new_acct” in a data vserver named vs2. A junction for this volume is created named “acct” from the root of vs2. This namespace will be mounted on a Linux host. What is the path that the Linux host needs to mount?

    A. /vs2/new_acct
    B. /vs2/acct
    C. /new_acct
    D. /vol/vs2/new_acct
    E. /acct
    E
  47. 47. An export policy can determine access to volumes for which of the following protocols?

    A. iSCSI and FC volumes
    B. CIFS and NFS volumes
    C. iSCSI, CIFS, NFS
    D. NFS volumes only
    E. CIFS volumes only
    B
  48. 48. Which of the following statements is true about export policies?

    A. Each data vserver can only have one assigned export policy
    B. Each data volume can only have one assigned export policy
    C. Each data volume can only have one assigned export rule
    D. Access to a volume is determined by the export policies created within an export rule
    B
  49. 49. Export policies and rules are stored in the …

    A. Vserver root volume for each data vserver
    B. /etc/exports
    C. M-host
    D. management RDB
    E. volume location RDB
    D
  50. 50. In clustered ONTAP, what benefit does NFSv4.1 pNFS provide?

    A. Reduces I/O traffic over the NVRAM connection in a HA pair
    B. Reduces I/O traffic over the management network
    C. Reduces I/O traffic over the network module
    D. Reduces I/O traffic over the data module
    E. Reduces I/O traffic over the cluster interconnect
    E
  51. 51. Which clustered ONTAP objects are “owned” by a data Vserver? (choose all that apply)

    A. Aggregates
    B. Volumes
    C. LUNs
    D. Ports
    E. LIFs
    F. Shelves
    G. Disks
    B C E
  52. 52. Clustered Data ONTAP supports ALUA with which protocols?

    A. FC only
    B. FC and FCoE only
    C. FC, FCoE and iSCSI only
    D. FC, FCoE, iSCSI and NFS only
    C
  53. 53. You create a Vserver for iSCSI LUNS. When you issue the Vserver iscsi show command it reports: “This table is currently empty”. What do you need to do to see the IQN for the vserver?

    A. Create an iSCSI LIF for the vserver
    B. Create a LUN in a vserver volume
    C. Enable the iSCSI protocol on the vserver
    D. Generate an iqn for the Vserver with the make nodename command
    E. License iSCSI on the vserver
    C
  54. 54. Which SAN LIF fails over?

    A. iSCSI LIFs only
    B. FCoE LIFs only
    C. iSCSI LIFs and FCoE LIFs only
    D. FC LIFs only
    E. None of the above
    E
  55. 55. What must be configured on the igroup in a multi-pathed SAN environment in clustered Data ONTAP?

    A. Asymmetric logical unit access
    B. Symmetric logical unit access
    C. Dynamic multi-path access
    D. LIF multi-path access
    E. LUN multi-path access
    A
  56. 56. Which commands can be used to identify the target iqn name in clustered Data ONTAP? (Choose all that apply)

    A. cluster iscsi show
    B. cluster iscsi nodename
    C. vserver iscsi nodename
    D. vserver iscsi show
    E. vserver iqn show
    C D
  57. 57. What command is used to show an iSCSI software initiator WWPN?

    A. iSCSI show nodename
    B. iscsiadm show WWPN
    C. iscsiadm -m node
    D. iSCSI does not use a WWPN
    D
  58. 58. Which feature must be enabled on a FC switch when using the FC protocol with clustered Data ONTAP 8.1?

    A. FL_Port ID Virtualization
    B. N_Port ID Virtualization (NPIV)
    C. FC over IP
    D. FC over Ethernet
    E. None of the above
    B
  59. 59. The fcadmin config command…

    A. Is a Clustershell command
    B. Is a Nodeshell command
    C. Is a Systemshell command
    D. Must be run in the advanced mode
    B
  60. 60. When storage failover (SFO) occurs and cluster mode SAN protocols are enabled on a data vserver:

    A. ALUA determines that the HA partner is an active direct path
    B. ALUA determines that the HA partner is an active indirect path
    C. ALUA determines the best path for active optimize LUN access even if it requires use of the cluster interconnect
    D. ALUA does not factor into the path selection during Storage Failover (SFO)
    A
  61. 61. What is the maximum number of nodes supported for clustered ONTAP 8.2 serving both SAN and NAS protocols?

    A. 1
    B. 2
    C. 4
    D. 6
    E. 8
    F. 24
    E
  62. 62. Which LIF is associated with the admin Vserver?

    A. Admin LIF
    B. Data LIF
    C. Cluster-management LIF
    D. Cluster LIF
    E. Node-management LIF
    A
  63. 63. Which make up the replicated database (RDB) rings in a cluster? (choose all that apply)

    A. protocol management daemon (protdb)
    B. management application (mgmt)
    C. administration (admdb)
    D. volume location database (vldb)
    E. virtual-interface manager (vifmgr)
    F. logical-interface manager (lifmgr)
    G. SAN management daemon (bcomd)
    B D G E
  64. 64. NAS clients see junctions as ______________ in the parent volume.

    A. Vservers
    B. Nodes
    C. directories
    D. sub-Volumes
    C
  65. 65. With regards to maintaining cluster quorum, epsilon functions as a ______________.

    A. master node
    B. duplicated management database
    C. secondary node
    D. tie-breaker
    D
  66. 66. When a client transverses a junction, the client has entered:

    A. a different Vserver
    B. a different volume
    C. a different junction
    D. a different cluster
    B
  67. 67. When a cluster is in quorum, what portion of participating nodes are healthy?

    A. Two thirds
    B. Simple majority
    C. Three quarters
    D. Half
    B
  68. 68. Which statement is true about a Flash Pool?

    A. A 32-bit or 64-bit aggregate containing SSDs and HDDs
    B. A 32-bit aggregate containing SSDs and HDDs
    C. A 64-bit aggregate containing SSDs and HDDs
    D. A 64-bit aggregate containing only SSDs
    C
  69. 69. A volume named vs2_vol2 is created on the netappu-02 aggregate. The path in the vs2 namespace is /vs2/vol2. If the volume is moved to the netappu-01 aggregate, what is the path after the move?

    A. /netappu-01/vs2/vs2_vol2
    B. /vs2/vol2
    C. /vol/vs2_vol2
    D. /vol/vs2/vs2_vol2
  70. 70. Which are types of failover groups? (choose all that apply)

    A. System-defined
    B. User-defined
    C. Next Available
    D. Priority
    E. Clusterwide
    A B E
  71. 71. Which statements are true about SAN LIFs? (choose all that apply)

    A. SAN LIFs are either up or down ??
    B. NAS and SAN protocols can share the same LIF ?? (either A or B is correct, not both).
    C. SAN LIFS can migrate online or automatically failover
    D. SAN LIFs can be associated with more than one data Vserver
    E. NAS and SAN LIFs can share the same data port
    A B E
  72. 72. Which types of LIFs can be assigned a user-defined failover group? (choose all that apply)

    A. Cluster LIF
    B. Node-management LIF
    C. Cluster-management LIF
    D. NAS data LIF (NFS,CIFS)
    E. SAN data LIF (iSCSI, FC)
    B C D
  73. 73. Which clustered ONTAP objects are “owned” by a data Vserver? (choose all that apply)

    A. Aggregates
    B. Volumes
    C. LUNs
    D. Ports
    E. LIFs
    F. Shelves
    G. Disks
    B C E
  74. 74. Clustered ONTAP 8.1 and later supports ALUA with which protocols?

    A. FC only
    B. FC and FCoE only
    C. FC, FCoE and iSCSI only
    D. FC, FCoE, iSCSI and NFS only
    C
  75. 75. How many cluster nodes are supported by the CN1610 Interconnect Switch in clustered ONTAP 8.2?

    A. 4
    B. 8
    C. 12
    D. 16
    E. 24
    C
  76. 76. What is the default shell for accessing clustered ONTAP?

    A. SPshell
    B. Nodeshell
    C. Clustershell
    D. Systemshell
    C
  77. 77. Which SAN LIF type allows failover?

    A. iSCSI LIFs only
    B. FCoE LIFs only
    C. FC LIFs only
    D. iSCSI LIFs and FCoE LIFs only
    E. FC LIFs and FCoE LIFs only
    F. None of the above
    F
  78. 78. What must be configured in clustered ONTAP 8.2 to support inter-cluster Snapmirror relationships? (choose all that apply

    A. Cluster peering relationship
    B. Intercluster port role
    C. Junction path for the mirrored volume
    D. Minimum transfer size
    E. Vserver peering relationship
    A E
  79. 79. What must be enabled on the igroup for SAN protocols in clustered Data ONTAP?

    A. Asymmetric logical unit access
    B. Symmetric logical unit access
    C. Dynamic multi-path access
    D. LIF multi-path access
    E. LUN multi-path access
    A
  80. 80. Which statements are true about a data protection (DP) mirror destination volume? (choose all that apply)

    A. Can be in the same Vserver as the source Vserver
    B. Can be in a different Vserver than the source Vserver
    C. Can be on a different cluster from the source Vserver cluster
    D. Can be on a Data ONTAP 7-mode system
    E. Can be smaller than the source
    A B C
  81. 81. Which versions of NFS are supported with clustered ONTAP 8.2 Vservers with FlexVol volumes?

    A. NFSv3 only
    B. NFSv2, NFSv3 and NFSv4
    C. NFSv3, NFSv4 and NFSv4.1
    D. NFSv2, NFSv3, NFSv4, NFSv4.1 and pNFS
    E. NFSv3, NFSv4, NFSv4.1 and pNFS
    E
  82. 82. Which protocols are supported with clustered ONTAP 8.2 Vservers with Infinite Volumes?

    A. NFSv3 only
    B. NFSv3, NFSv4 and NFSv4.1
    C. CIFS, NFSv4 and NFSv4.1
    D. SMB 1.x, NFSv3, NFSv4.1 and pNFS
    D
  83. 83. Which statement is true about CFO and SFO in clustered ONTAP?

    A. CFO aggregates are given back first, then SFO aggregates are given back one at a time.
    B. SFO aggregates are given back first, then CFO aggregates are given back one at a time.
    C. All aggregates are given at the same time.
    D. None, clustered ONTAP supports SFO aggregates only.
    A
  84. 84. Which configurations are supported in clustered ONTAP 8.2? (choose all that apply)

    A. Single-node clusters
    B. Switchless 2-node clusters
    C. Switchless 4-node clusters
    D. 5-node clusters
    E. 8-node clusters with NAS and SAN
    F. 24-node clusters with NAS and SAN
    A B E
  85. 85. What are the three types of Vservers in clustered ONTAP? (choose all that apply)

    A. Node Vserver
    B. Admin Vserver
    C. Data Vserver
    D. System Vserver
    A B C
  86. 86. What is the default system account?

    A. root
    B. naroot
    C. administrator
    D. admin
    D
  87. 87. The root volume of a node in the cluster is called __________.

    A. vs_root
    B. mhost
    C. vol0
    D. rootvol
    C
  88. 88. When creating a LIF for NFS or CIFS, what is the default failover policy?

    A. Priority
    B. Nextavail
    C. Round robin
    D. Disabled
    B
  89. 89. Storage QOS maximum throughput limits can be defined in terms of:

    A. IOPS only
    B. MB/s only
    C. IOPS or MB/s
    D. IOPS and MB/s
    C
  90. 90. The aggregate relocation feature allows an administrator to move a __________.

    A. Data aggregate to any node
    B. Root aggregate to any node
    C. Data aggregate to the HA partner
    D. Root aggregate to the HA partner
    C
  91. 91. In clustered ONTAP 8.2, which statement is true about backup vaults?

    A. Only work on qtrees
    B. Work on all volumes
    C. Only work on FlexVol volumes
    D. Only work on Infinite volumes
    E. None, clustered ONTAP doesn’t support SnapVault
    C
  92. 92. What is the supported speed and frame size on the cluster interconnect?

    A. 1 Gb / 1500 mtu
    B. 1 Gb / 9000 mtu
    C. 10 Gb / 1500 mtu
    D. 10 Gb / 9000 mtu
    E. No specific requirements
    D
  93. 93. What is considered a node in a clustered ONTAP?

    A. An HA storage controller pair
    B. A single storage controller
    C. A data Vserver
    D. A data port
    B
  94. 94. A block from a Flash Pool read operation is initially marked as __________.

    A. hot
    B. warm
    C. neutral
    D. cold
    E. evict
    C
  95. 95. What is the maximum number of nodes supported for a cluster serving only NAS protocols?

    A. 1
    B. 2
    C. 4
    D. 8
    E. 16
    F. 24
    F
  96. 96. Which statements are true of licensing in clustered ONTAP 8.2? (choose all that apply)

    A. The base license is still required and is based on the node count
    B. Licenses are node-locked
    C. Length of license is 14 characters
    D. Length of license is 28 characters
    E. HA functionality doesn’t require a license
    F. HA functionality requires a license
    B D E
  97. 97. The network interface show command output lists the value of “false” under the “Is Home” column. False signifies the LIF __________. (choose all that apply)
    A. is disconnected
    B. has failed over
    C. is administratively disabled
    D. has been migrated
    E. is currently being migrated to home node
    B D
  98. 98. What type of LIF is used to replicate between two clusters?

    A. node
    B. cluster
    C. intercluster
    D. cluster-mgmt
    E. data
    C
  99. 99. Which logical interfaces have failover and online migration capabilities in a different node? (choose all that apply)

    A. Cluster
    B. Cluster management
    C. Data (FC, iSCSI)
    D. Data (CIFS, NFS)
    E. Node-management
    B D
  100. 100. How many cluster ports per node are supported in clustered ONTAP 8.2?

    A. One
    B. Two
    C. Three
    D. Four
    B
  101. 101. Which privilege levels are found in clustered ONTAP? (choose all that apply)

    A. single_user
    B. admin
    C. manage
    D. advanced
    E. diagnostic
    F. backup
    B D E
  102. 102. Which Vserver types are created automatically by the cluster setup process? (choose all that apply)

    A. Management
    B. Admin
    C. Protocol
    D. Node
    E. Data
    B D
  103. 103. Which commands can be used to create a data Vserver? (choose all that apply)

    A. vserver configure
    B. vserver setup
    C. vserver set_up
    D. vserver make
    E. vserver create
    B E
  104. 104. Clustered ONTAP supports multi-tenancy using which feature?

    A. Allow a unique login account (admin) for cluster administration purposes.
    B. Allow a unique login account (vsadmin) for cluster administration purposes.
    C. Allow a unique login account (admin) to each Vserver for administration purposes.
    D. Allow a unique login account (vsadmin) to each Vserver for administration purposes.
    D
  105. 105. How many ISL ports are required between the cluster interconnect switches when using Cisco switches?

    A. 2
    B. 4
    C. 6
    D. 8
    E. None; No ISLs are required
    D
  106. 106. How many ISL ports are required between the cluster interconnect switches when using CN1610 switches?

    A. 2
    B. 4
    C. 6
    D. 8
    E. None; No ISLs are required
    B
  107. 107. Which are predefined roles for cluster administrators in clustered ONTAP 8.2? (choose all that apply)

    A. vsadmin-none
    B. admin
    C. vsadmin-backup
    D. vsadmin
    E. vsadmin-readonly
    F. backup
    G. vsadmin-autosupport
    H. readonly
    C D E
  108. 108. Clustered ONTAP 8.2 supports which quota types? (choose all that apply)

    A. User
    B. Volume
    C. Group
    D. Tree
    E. None; clustered ONTAP doesn’t support quotas.
    A B D
  109. 109. FlexCache volumes in clustered ONTAP 8.2 __________.

    A. Are fully provisioned
    B. Can have Snapshot copies
    C. Can be moved
    D. Are sparsely-populated volumes
    D
  110. 110. In clustered ONTAP, what object exposes data to clients?

    A. A high-available pair
    B. A virtual storage server (Vserver)
    C. A virtual filer (vFiler)
    D. A cluster
    B
  111. 111. How do you create NFS export within clustered ONTAP?

    A. Define an export policy and rules under the node Vserver
    B. Define an export policy and rules under the admin Vserver
    C. Define an export policy and rules under a data Vserver
    D. Define an export policy under a data Vserver and rules under the admin Vserver
    C
  112. 111. In which shell can administrators natively run Data ONTAP 7-Mode commands?

    A. nodeshell
    B. systemshell
    C. clustershell
    D. adminshell
    A
  113. 112. What is the command to start recording the current CLI session into a file?

    A. system cli record
    B. system script record
    C. system script start
    D. system record start
    C
  114. 113. The system image show command output lists the value of “true or false” under the “Is Current” column. The image marked “true” indicates the image:

    A. Is currently booted
    B. Is the latest version
    C. Will used after a reboot
    D. Has just been downloaded
    A
  115. 114. Which statements are true regarding backup vaults in clustered ONTAP 8.2? (chose all that apply)

    A. Data can only be restored to a qtree.
    B. Backup vaults are at either a volume or qtree level.
    C. Data can be restored to either the source volume or a new volume on the same or different clusters.
    D. Backup vaults are at the volume level only.
    E. Compatible with 7-mode SnapVault.
    C D
  116. 115. By default how many management ports are there per node?

    A. One
    B. Two
    C. Three
    D. Four
    A
  117. 116. How do you organize volumes for data clients with an appropriate export policy?

    A. Mount the required volumes in a namespace
    B. Mount the required namespaces in a volume
    C. Mount the required namespaces in an aggregate
    D. Mount directories of a volume in a namespace
    A
  118. 117. Which are the role types that can be assigned to ports in clustered ONTAP? (choose three)

    A. Data
    B. Cluster-management
    C. Cluster
    D. Node-management
    A C D
  119. 118. Which term is used to highlight that a storage administrator can add more than 2 storage systems to a cluster?

    A. Scale up
    B. Scale horizontal
    C. Scale vertical
    D. Scale out
    D
  120. 119. Which of the following statements are true in a SnapMirror Load-Sharing (LS) mirror relationship? (Choose two)

    A. Client requests to write data are allowed if the user is admin
    B. Client requests to write data are denied unless accessing the .admin share
    C. Client requests to read data are only allowed if the mirror is up-to-date
    D. Client requests to read data are redirected to the LS mirror destination volumes
    B D
  121. 120. In clustered Data ONTAP, snapshots are scheduled by creating

    A. A snapshot policy within the vserver that applies to all volumes in the vserver
    B. A snapshot policy within the vserver that is applied at the volume level
    C. A snapshot policy within the clustershell that can be used by every vserver but applied individually at the volume level
    D. A snapshot policy within the clustershell that can be used by each vserver but applies to all volumes within the vserver
    C D
  122. 121. Where can NDMP backups be performed?

    A. Within the data Vserver
    B. Within the cluster Vserver
    C. From any node in the cluster
    D. From the node that owns the volume
    D
  123. 122. Which statement is true about establishing a SnapMirror relationship in clustered data ONTAP?

    A. It sets up the relationship, but does not start the initial transfer
    B. It sets up the relationship on the source node only
    C. It sets up the relationship and starts the initial data transfer
    D. It sets up the relationship and creates the destination volume
    A
  124. 123. Which type of LIF allows replication between two clusters?

    A. Cluster
    B. Cluster-mgmt
    C. Data
    D. Intercluster
    E. Node-mgmt
    F
  125. 124. What must be configured to support inter-cluster Snapmirror relationships?

    A. Cluster peer relationship
    B. Intercluster port role
    C. Junction path for the mirrored volume
    D. Minimum transfer size
    A
  126. 125. What communication link is necessary in order to establish an inter-cluster relationship?

    A. The cluster interface on each node must be able to communicate with the intercluster interface on each node in the both the source and destination clusters
    B. The cluster interface on the source cluster must be able to communicate with the cluster interface on the destination cluster
    C. The intercluster interface on the source cluster must be able to communicate with the intercluster interface on the destination cluster
    D. The intercluster interface on the source cluster must be able to communicate with the cluster interface on the destination cluster
    C
  127. 126. Which of the following is true about a data protection (DP) mirror destination volume? (Choose all that apply)


    A. Can be in the same vserver as the source
    B. Can be in a different vserver as the source
    C. Can be on a different cluster from the source
    D. Can be on a Data ONTAP 7-mode system
    E. Can be smaller than the source
    A B C
  128. 127. In clustered Data ONTAP 8.2, which of the following commands will restore an entire volume

    A. volume snapshot promote
    B. volume snapshot restore
    C. volume snapshot resync
    D. None of the above, just use the .snapshot or ~snapshot directory to restore the entire volume
    B
  129. 128. Which of the following statements are true about data protection mirrors? (Choose all that apply)

    A. A data protection source volume supports up to 4 destination mirrored volumes
    B. A data protection source volume supports up to 1 destination volume per node
    C. A volume must be created before it can be used as a mirror destination
    D. Creating a mirror relationship also creates the destination volume
    A C
  130. 129. Which storage efficiency features are available in clustered Data ONTAP 8.2? (choose all that apply)

    A. Thin provisioning
    B. FlexClone
    C. Deduplication
    D. SnapVault
    E. Compression
    F. SyncMirror
    A B C E
  131. 130. Which feature is NOT supported by clustered Data ONTAP 8.2?

    A. Synchronous SnapMirror
    B. Data Protection Mirrors
    C. Load Sharing Mirrors
    D. Non-disruptive upgrades
    A
  132. 131. What are some of the benefits to customers when using clustered Data ONTAP? (Choose all that apply)

    A. Scalability
    B. Transparency
    C. Flexibility
    D. Non-disruptive operations
    A B C D
  133. 132. In clustered Data ONTAP, which object presents data to clients?

    A. A high-available pair of storage controllers
    B. A virtual server
    C. A virtual filer
    D. A cluster
    B
  134. 133. Which LIF is associated with the admin vserver?

    A. Admin LIF
    B. Data LIF
    C. Cluster management LIF
    D. Cluster LIF
    E. Node management LIF
    C
  135. 134. Which user space utility is used to manage NFS and CIFS access?

    A. secd
    B. spmd
    C. RDB
    D. Notifyd
    A
  136. 135. Which user space utility is used to manage other applications in the user space?

    A. secd
    B. RDB
    C. Notifyd
    D. spmd
    D
  137. 136. Which of the following statements is true about the cluster session manager? (Choose all that apply)

    A. Handles networking, NFS, and CIFS
    B. Provides a communication mechanism between any Network module or SCSI module and any Data module
    C. Provides a reliable transport for SpinNP traffic over TCP/IP
    D. Is used regardless of whether the Network module or SCSI module and Data module are on the same node or different nodes
    B D
  138. (CSM is the SpinNP layer between network and SCSI + Data modules.)

    137. The vifMgr is out of quorum on the node that is the master for the vifMgr ring. Which of the following statements are true? (choose all that apply)

    A. A new master will be elected for the vifMgr RDB unit
    B. Epsilon will not be available in the cluster
    C. Clients can access data through the LIFs on this node
    D. A new LIF can be created for a data vserver
    A C
  139. 138. Which of the following statements is true about epsilon?

    A. There is a specific epsilon for each replicated database unit
    B. If the node with epsilon is rebooted, epsilon will automatically move to another available node
    C. Epsilon is manually configurable
    D. Epsilon cannot be moved manually
    C
  140. 139. If a customer has a 2-node cluster, which of the following must be enabled for storage failover (SFO) to function properly?

    A. cluster ha modify –configured true
    B. cluster modify –node –eligibility true
    C. storage failover modify -node enabled true
    D. storage failover modify –node -hwassist true
    A
  141. 140. What are the LIF roles that can be assigned to ports in Data ONTAP Cluster-Mode? (choose all that apply)

    A. Data
    B. Cluster management
    C. Cluster
    D. Node management
    E. Intercluster
    A B C D E
  142. 141. In clustered Data ONTAP, the NFS mount or the CIFS share path need to contain the following:

    A. Vserver root volume
    B. Absolute path of the volume
    C. Aggregate name for the volume
    D. Junction path name for the volume
    D
  143. 142. Which of the following steps must be completed before a CIFS share can be active?

    A. Configure name mapping
    B. License both NFS and CIFS
    C. Create a data LIF for the CIFS server on every node
    D. Reboot the node containing the CIFS Vserver root volume
    A
  144. 143. A volume is created named “new_acct” in a data vserver named vs2. A junction for this volume is created named “acct” from the root of vs2. This namespace will be mounted on a Linux host. What is the path that the Linux host needs to mount?

    A. /vs2/new_acct
    B. /vs2/acct
    C. /new_acct
    D. /vol/vs2/new_acct
    E. /acct
    E
  145. 144. Which of the following are appropriate client specification for an export rule? (Choose all that apply)

    A. 0.0.0.0/0
    B. 192.168.5.0/24
    C. .eng.netapp.com
    D. \\vs_root\192.168.153.128
    A B C
  146. 145. Which steps need to be completed when creating a CIFS share? (Choose all that apply)

    A. Configure a share policy
    B. Configure an export policy
    C. Configure name mapping
    D. Configure a snapshot policy
    E. Create a junction path within the Vserver namespace
    B C E
  147. 146. Which commands can be used to identify the target iqn name in clustered Data ONTAP 8.2? (Choose all that apply)

    A. cluster iscsi show
    B. cluster iscsi nodename
    C. vserver iscsi nodename
    D. vserver iscsi show
    E. vserver iqn show
    D

What would you like to do?

Home > Flashcards > Print Preview