API 650

Card Set Information

Author:
SamG
ID:
265543
Filename:
API 650
Updated:
2014-03-08 12:11:25
Tags:
API
Folders:
API
Description:
API 653 EXAM Prep
Show Answers:

Home > Flashcards > Print Preview

The flashcards below were created by user SamG on FreezingBlue Flashcards. What would you like to do?


  1. API 650 - Materials Section?
    Section 4
  2. API 650 - Design Section?
    Section 5
  3. API 650 - Fabrication Section?
    Section 6
  4. API 650 - Erection Section?
    Section 7
  5. API 650 - Inspection Section?
    Section 8 - Method of Examining Joints
  6. API 650 - Welding Procedures & Welder Qualifications - Section?
    Section 9
  7. API 650 - Marking - Section
    Section 10
  8. API 650 - External Floating Roofs - Section?
    Annex C
  9. API 650 - Internal Floating Roofs - Section?
    Annex H
  10. API 650 - Tanks with Elevated Temperatures?
    Annex M
  11. API 650 - Construction of Foundations - Section?
    Annex B
  12. API 650 - Impact Testing - Section?
    Section 4.5 - Materials; Piping and Forgings
  13. API 650 - Weld Design - Section?
    Section 5.1 - Design; Joints
  14. API 650 - PWHT?
    Section 5.7 -  Design; Shell Openings
  15. API 650 - Nozzles?
    Section 5.7 -  Design; Shell Openings
  16. API 650 - Roof Hatch Sizing?
    Section 5.8 - Design; Shell Attachments & Tank Appurtenances
  17. API 650 - Drain Holes?
    Section 5.9 - Design; Top and Intermediate Stiffening Rings
  18. API 650 - Roofs?
    Section 5.10 - Design; Roofs
  19. What is Fabrication in API 650?
    Cutting and Rolling Plate
  20. Inspection of Bottom to Shell Weld - Section?
    Section 7.2 - Erection; Details of Welding
  21. API 650 - Section 4
    Materials
  22. API 650 - Section 5
    Design
  23. API 650 - Section 6
    Fabrication
  24. API 650 - Section 7
    Erection
  25. API 650 - Section 8
    Method of Examining Joints (Inspection)
  26. API 650 - Section 9
    Welding Procedure and Welder Qualifications
  27. API 650 - Section 10
    Marking
  28. API 650 - Annex B
    Construction of Foundations
  29. API 650 - Annex C
    External Floating Roofs
  30. API 650 - Annex F
    Tanks with low Pressure - <15psig
  31. API 650 - Annex H
    Internal Floating Roofs
  32. API 650 - Annex M
    Hot Tanks - 200F to 500F
  33. MDMT Chart?
    API 650 - Section 4 - Materials; Figure 4.1b
  34. 1-Day Temp Map?
    API 650 - Section 4 - Materials; Figure 4.2
  35. Minimum Operating Temp & Acceptance Criteria?
    • MOT=MDMT Chart + 15oF
    • Acceptance= MOT > MDMT
  36. Material Group #?
    API 650 - Section 4 - Table 4.4b; Material Groups
  37. Minimum Impact Test Requirements for Plate - Table?
    Section 4 - Table 4.5b
  38. Impact Test Acceptance Criteria?
    • IMPACT TEST ACCEPTANCE CRITERIA
    • 1. Avg of Set is Abv Table value
    • 2. Min specimen is > 0.67 of table value
    • 3. Only 1 specimen is less than table
  39. Minimum Fillet Weld Size for Shell to Bottom Welds
    Section 5.1.5.7; Shell to Bottom Fillet Welds
  40. Annular Bottom Plate Thickness Requirements?
    Section 5 - Design; Table 5.1b
  41. Nominal Tank Diameter vs. Nominal Plate Thickness Requirements
    API 650 - Section 5.6.1.1 - Design
  42. Allowable Stresses - Table?
    API 650 - Section 5 - Design; Table 5.2b; Allowable Stresses.
  43. Shell Thickness Calcs? (1-Foot Method & Variable Design-Point Method)
    API 650 - Section 5 - Design (Calcs 5.6.3 & 5.6.4)
  44. Maximum Water Filling Rate?
    API 650 - Section 7 - Erection (7.3.6.5)
  45. When must a Plate be Rolled?
    API 650 - Section 6 - Fabrication
  46. Minimum Preheat Requirements?
    API 650 - Section 7 - Erection (Table 7.1b)
  47. Roundness?
    API 650 - Section 7 - Erection (7.5.3)
  48. Misalignment & Over Projection?
    API 650 - Section 7 - Erection (7.2.3)
  49. # of RT's
    API 650 - Section 8 - Inspection; Figure 8.1
  50. Max weld Reinforcement - Prior to RT?
    API 650 - Section 8 - Inspection (8.1.3.4)
  51. Max weld Reinforcement - Non-RT Cap?
    API 650 - Section 8 - Inspection (8.5.2)
  52. Reference - MDMT for Mat'l used for Tank shells w/o Impact testing
    API 650 - Figure 4.1b
  53. Reference - Lowest 1 Day Mean Temp
    API 650 - Figure 4.2
  54. Reference - Material Groups
    API 650 - Section 4 - Materials - Table 4.4b - Material Groups
  55. Shell to bottom Fillet Weld - Minimum Size?
    API 650 - Section 5 - Design - 5.1.5.7 Shell-to-Bottom Fillet Welds
  56. Annular Bottom Plate Thickness
    API 650 - Section 5 - Design - Table 5.1b
  57. Shell Design - Nominal Plate Thickness
    API 650 - Section 5 - Design - General 5.6.1.1.
  58. Permissible Plate Materials and Allowable Stresses (New Construction)
    API 650 - Section 5 - Design - Table 5.2
  59. Calculation of Shell Minimum Thickness by the 1-foot Method - PRODUCT Formula
    td=2.6D(H-1)G/Sd + CA
  60. Calculation of Shell Minimum Thickness by the 1-foot Method - HYDRO Formula
    tt=2.6D(H-1)/St
  61. Hydro - Water Fill Rate
    API 650 - Section 7 - Erection - 7.3.6.5
  62. Minimum Preheat Temperatures
    API 650 - Section 7 - Erection - Table 7.1
  63. Shell Misalignment & Over projection
    • API 650 - Section 7 - Erection
    • API 653 - Section 10 - Reconstruction
    • thick/ Vert Weld/ Hor Weld
    • <0.312 / 1/16 / 1/16
    • 0.312 to <0.625 / 1/16 / 0.2 x t
    • 0.625 to < 1.250 / 0.1 x t / 1/8
    • >1.250 / 1/8 / 1/8
    • *HOR welds ; thick based on Upper plate
  64. Shell - Roundness (Out of Roundness)
    API 650 - Section 7 - Erection (7.5.3)
  65. # of RT's - Radiographic Requirements for Tank Shells (NEW)
    API 650 - Section 8 - Method of Examining Joints- Figure 8.1
  66. Weld Reinforcement - Prior to RT
    API 650 - Section 8 - Method of Examining Joints- (8.1.3.4 - Cap Height Prior to RT)
  67. Weld Reinforcement - Non-RT Cap Height
    API 650 - Section 8 - Method of Examining Joints- (8.5.2- Visual Examination - Non-RT Cap Height)
  68. Weld Reinforcement - Non-RT Cap Height
    API 650 - Section 8 - Method of Examining Joints- (8.5.2- Visual Examination - Non-RT Cap Height)

What would you like to do?

Home > Flashcards > Print Preview