ARRL T1B questions valid until June 2014.txt

The flashcards below were created by user mwinstom on FreezingBlue Flashcards.

  1. What is the ITU?
    A. An agency of the United States Department of Telecommunications Management
    B. A United Nations agency for information and communication technology issues
    C. An independent frequency coordination agency
    D. A department of the FCC
  2. North American amateur stations are located in which ITU region?
    A. Region 1
    B. Region 2
    C. Region 3
    D. Region 4
  3. Which frequency is within the 6 meter band?
    A. 49.00 MHz
    B. 52.525 MHz
    C. 28.50 MHz
    D. 222.15 MHz
  4. Which amateur band are you using when your station is transmitting on 146.52 MHz?
    A. 2 meter band
    B. 20 meter band
    C. 14 meter band
    D. 6 meter band
  5. Which 70 cm frequency is authorized to a Technician Class license holder operating in ITU Region 2?
    A. 53.350 MHz
    B. 146.520 MHz
    C. 443.350 MHz
    D. 222.520 MHz
  6. Which 23 cm frequency is authorized to a Technician Class operator license?
    A. 2315 MHz
    B. 1296 MHz
    C. 3390 MHz
    D. 146.52 MHz
  7. What amateur band are you using if you are transmitting on 223.50 MHz?
    A. 15 meter band
    B. 10 meter band
    C. 2 meter band
    D. 1.25 meter band
  8. What do the FCC rules mean when an amateur frequency band is said to be available on a secondary basis?
    A. Secondary users of a frequency have equal rights to operate
    B. Amateurs are only allowed to use the frequency at night
    C. Amateurs may not cause harmful interference to primary users
    D. Secondary users are not allowed on amateur bands
  9. Why should you not set your transmit frequency to be exactly at the edge of an amateur band or sub-band?
    A. To allow for calibration error in the transmitter frequency display
    B. So that modulation sidebands do not extend beyond the band edge
    C. To allow for transmitter frequency drift
    D. All of these choices are correct
  10. Which of the bands available to Technician Class operators have mode-restricted sub-bands?
    A. The 6 meter, 2 meter, and 70 cm bands
    B. The 2 meter and 13 cm bands
    C. The 6 meter, 2 meter, and 1.25 meter bands
    D. The 2 meter and 70 cm bands
  11. What emission modes are permitted in the mode-restricted sub-bands at 50.0 to 50.1 MHz and 144.0 to 144.1 MHz?
    A. CW only
    B. CW and RTTY
    C. SSB only
    D. CW and SSB
Card Set:
ARRL T1B questions valid until June 2014.txt
2014-03-21 15:10:02

Show Answers: