Windows Server 2008 Ch3

Card Set Information

Author:
a2k2d2
ID:
268122
Filename:
Windows Server 2008 Ch3
Updated:
2014-05-09 21:33:36
Tags:
Windows Server 2008
Folders:

Description:
Windows Server 2008 Administration Fundamentals Chapter 3
Show Answers:

Home > Flashcards > Print Preview

The flashcards below were created by user a2k2d2 on FreezingBlue Flashcards. What would you like to do?


  1. Which would you recommend on a server, IDE or SCSI?
    SCSI
  2. What does RAID stand for?
    Redundant Array of Independent Disks
  3. What are the different RAID levels?
    • RAID 0:  Striping, requires 2 disks min.
    • RAID 1:  Mirroring, requires 2 disks min.
    • RAID 0+1:  A striped dataset that is mirrored, requires 2 disks min.
    • RAID 1+0:  A mirrored dataset that is striped, requires 2 disks min.
    • RAID 5:  Striping with parity, requires 3 disks min.
    • RAID 6:  Striping with double parity, requires 4 disks min.
  4. What is disk parity?
    Error correction
  5. What are the differences between basic and dynamic disks?
    Basic disks provide traditional storage.

    Dynamic disks offer software-based RAID and the ability to re-size volumes without rebooting.
  6. What is the maximum number of primary partitions that MBR supports on a single disk drive?
    4
  7. Which of the following explicit NTFS permissions overrides all other permissions?

    A.  Take Ownership
    B.  Allow Full Control
    C.  Allow Read & Write
    D.  Deny Full Control
    D.  Deny Full Control
    (this multiple choice question has been scrambled)
  8. Which of the following statements regarding user access and activity are TRUE?

    A.  Permissions are used to control user access to a domain.
    B.  Auditing is used to track user activity on a domain.
    C.  Authentication is used to allow a user access at the file system level.
    D.  The Event Log tracks user activity on a client computer.
    B.  Auditing is used to track user activity on a domain.
    (this multiple choice question has been scrambled)
  9. Which of the following is a logical reference that allows management of a disk array?

    A.  SATA
    B.  NAS
    C.  RAID
    D.  LUN
    D.  LUN
    (this multiple choice question has been scrambled)
  10. RAID 1 uses _____ to provide fault tolerance.
    disk mirroring
  11. Which of the following statements regarding Windows Server 2008 is true?

    A.  In Windows Server 2008, NTLDR is responsible for memory management
    B.  In Windows Server 2008, NTOSKRNL.EXE is known as the kernel and is responsible for system services.
    C.  In Windows Server 2008, Services is responsible for system services and process management.
    D.  In Windows Server 2008, NTOSKRNL.EXE is the first system file to be loaded and is responsible for the POST process.
    B.  In Windows Server 2008, NTOSKRNL.EXE is known as the kernel and is responsible for system services.
    (this multiple choice question has been scrambled)
  12. Where would you find the default print spool folder?

    a.  C:USERS<%USERNAME%>Printers
    b.  C:WindowsSystemPrinters
    c.  C:WindowsSystem32SpoolPrinters
    d.  C:Users<%USERNAME%>Local SettingsApplication DataMicrosoftSpoolPrinters
  13. In Windows 7, where is the boot configuration data stored?
    In BCD
  14. You work as a server administrator at ABC,cm.  You need to install Windows Server 2008 R2 in unattended mode over the LAN.  Which of the following technologies would you use?

    A.  PXE
    B.  SysPrep
    C.  WDS
    D.  TCP/IP
    C.  WDS
    (this multiple choice question has been scrambled)
  15. In Windows Server 2008 R2 where is the BOOTMGR located?
    VBR
  16. What is the maximum partition size supported by MBR?
    2 TB
  17. Which of the following statements regarding data storage devices is true?

    A.  Network attached storage (NAS) is connected to a server or a network to provide shared drives or folders using NTFS.
    B.  Network attached storage (NAS) is connected to a network to provide shared drives or folders using SMB/CIFS.
    C.  A storage area network (SAN) is connected to a network to provide shared drives or folders using NTFS.
    D.  A storage area network (SAN) is connected to a server or a network to provide shared drives or folders using SMB/CIFS.
    B.  Network attached storage (NAS) is connected to a network to provide shared drives or folders using SMB/CIFS.
    (this multiple choice question has been scrambled)
  18. Which of the following Windows servers makes use of LDAP?

    A.  DHCP Server
    B.  DNS Server
    C.  Domain Controllers
    D.  File and Print Servers
    E.  Application Server
    C.  Domain Controllers
    (this multiple choice question has been scrambled)
  19. RAID 0 improves performance by implementing _____.
    striping
  20. Which of the following is responsible for controlling a device in Windows Server 2008?

    A.  The operating system
    B.  device drivers
    C.  The USB port
    D.  The CPU
    E.  The IRQ and DMA address
    B.  device drivers
    (this multiple choice question has been scrambled)
  21. Which of the following is required in Windows Server 2008 for print sharing?

    A.  The File Replication Service
    B.  The Server Service
    C.  The WebClient Service
    D.  The Terminal Service
    E.  The Computer Browser Service
    B.  The Server Service
    (this multiple choice question has been scrambled)
  22. ABC.com has server computers running Windows Server 2003 SP2 32-bit Enterprise Edition, Windows Server 2003 SP2 64-bit Enterprise Edition, Windows Server 2008 SP1 32-bit Standard Edition, Windows Server 2008 SP1 64-bit Standard Edition and Windows Server 2008 R2 Standard Edition.  On which of these computers can you perform an in-place upgrade to Windows Server 2008 R2 Enterprise Edition?

    A.  All of the computers except Windows Server 2003 SP2 32-bit Enterprise Edition and Windows Server 2003 SP2 64-bit Enterprise Edition.
    B.  All of the computers except Windows Server 2003 SP2 32-bit Enterprise Edition and Windows Server 2008 SP1 32-bit Standard Edition.
    C.  None of the computers except Windows Server 2003 SP2 64-bit Enterprise Edition and Windows Server 2008 SP1 64-bit Standard Edition.
    D.  None of the computers except Windows Server 2003 SP2 64-bit Enterprise Edition.
    E.  None of the computers except Windows Server 2008 R2 Standard Edition.
    C.  None of the computers except Windows Server 2003 SP2 64-bit Enterprise Edition and Windows Server 2008 SP1 64-bit Standard Edition.
    (this multiple choice question has been scrambled)
  23. Which of the following statements regarding FSMO roles are TRUE?

    A.  A domain can have more than one Infrastructure master which is responsible for updating references from objects in its domain to objects in other domains.
    B.  The RID master acts as the primary server for password changes and as the master time server.
    C.  The Schema master is responsible for updating references from objects in its domain to objects in other domains.
    D.  The PDC Emulator provides backward compatibility for NT4 clients and acts as the master time server.
    D.  The PDC Emulator provides backward compatibility for NT4 clients and acts as the master time server.
    (this multiple choice question has been scrambled)
  24. How much RAM does Windows Server 2008 R2 Foundation Edition support?
    32 GB
  25. You work as a server administrator for ABC.com.  You have assigned NTFS permissions to a shared folder.  Where are these permissions stored?
    ACL
  26. What is the minimum NTFS permissions you must have in order to alter a file's attributes?
    Write permissions
  27. Which of the following regarding shared folders are TRUE?

    A.  The Read and Write shared permissions and the Read NTFS permission are the recommended permissions you should set on a shared folder.
    B.  The Full Control shared permission and the Read NTFS permission are the recommended permissions you should set on a shared folder.
    C.  The Full Control shared permission is the recommended permissions you should set on a shared folder.
    D.  You should configure shared folders to inherit permissions from its parent container.
    C.  The Full Control shared permission is the recommended permissions you should set on a shared folder.
    (this multiple choice question has been scrambled)
  28. Which RAID configuration does NOT provide fault tolerance?
    RAID 1
  29. What is the maximum number of partitions that GPT supports on a single disk drive?
    128

What would you like to do?

Home > Flashcards > Print Preview