C6

Card Set Information

Author:
Anonymous
ID:
26987
Filename:
C6
Updated:
2010-07-15 23:22:21
Tags:
C6 Contractor
Folders:

Description:
C6 Contractor
Show Answers:

Home > Flashcards > Print Preview

The flashcards below were created by user Anonymous on FreezingBlue Flashcards. What would you like to do?


  1. spacing hinge side: ____ inches
    1/16
  2. undercut interior: ____ inches
    7/8
  3. space between door & head jamb: ____ inches
    1/8
  4. space latch & strike side: ____ inches
    1/8
  5. R/O should be ____ inches larger than net size of door
    2 1/2
  6. interior door stiles and rails: ____ inches
    4 1/2
  7. backset for exterior latch: ____ inches
    2 3/4
  8. backset for interior latch: ____ inches
    2 3/8
  9. hinge left opens inward
    LH
  10. hinge right opens inward
    RH
  11. hinge left opens outward
    LH reverse
  12. hinge right opens outward
    RH reverse
  13. anatomy of a door opening
    • header
    • king stud
    • trimmer stud
  14. anatomy of a window opening
    • header
    • trimmer stud
    • rough sill
    • top cripple studs
    • bottom cripple studs
  15. egress size
    5.7 sq ft
  16. windows must be tempered if less than ____ inches from the floor
    18"
  17. for exterior doors stiles and rails must be at least ____ inches
    5 3/8
  18. no more than ____ inches is allowed between the bottom of an interior door and the floor.
    7/8
  19. exterior door rails must be at least ____ inches
    11 3/8
  20. interior door bottom rails must be at least ____ inches in width
    9
  21. edges of cutouts for louvers or lights must be at least ____ inches away from any edge
    5
  22. how many basic sq ft for residential kitchen space?
    18
  23. interior door thickness
    1 3/8
  24. exterior door thickness
    1 3/4
  25. when nailing casing space nails _____ inches apart
    16
  26. rabbeted jambs must be at least _____ inches
    1 3/16
  27. rough milled lumber 4/4= ? _____ inches
    1
  28. rough milled lumber 5/4= ? _____ inches
    1 1/4
  29. rough milled lumber 6/4= ? _____ inches
    1 1/2
  30. rough milled lumber 8/4= ? _____ inches
    2
  31. a warp in any direction of lumber more than _____ inches is considered a defect
    3/8
  32. on stairs the rise of every step must be at least ____ inches and no greater than ____ inches
    4, 7
  33. standard depth upper kitchen cabinet
    12"
  34. which screw has greatest holding power
    2" No. 12
  35. the strenght of a stile & rail door is primarily dependent on:
    the shoulders & joints between the stiles & rails
  36. standard depth of a kitchen countertop
    24"

What would you like to do?

Home > Flashcards > Print Preview