CNC HAAS Lathe G & M Codes

Card Set Information

Author:
joshuacassel
ID:
272977
Filename:
CNC HAAS Lathe G & M Codes
Updated:
2016-02-27 11:01:15
Tags:
General Machinist CNC Lathe HAAS Codes
Folders:
Machining
Description:
CNC HAAS Lathe G & M Codes used in the Level 2 General Machinist Class at Conestoga College Doon Campus. These cards are setup so you have to know the code and what it means. Also run them in random.
Show Answers:

Home > Flashcards > Print Preview

The flashcards below were created by user joshuacassel on FreezingBlue Flashcards. What would you like to do?


  1. G00
    Rapid Movement:
  2. Rapid Movement:
    G00
  3. G01
    Linear Movement:
  4. Linear Movement:
    G01
  5. G02
    Circular Movement Clockwise
  6. Circular Movement Clockwise:
    G02
  7. G03
    Circular Movement Counter-Clockwise
  8. Circular Movement Counter-Clockwise:
    G03
  9. G04
    Dwell
  10. Dwell
    G04 P __
  11. G10
    Offset Setting
  12. Offset Setting
    G10
  13. G17
    XY Plane Selection
  14. XY Plane Selection
    G17
  15. G18
    XZ Plane Selection
  16. XZ Plane Selection
    G18
  17. G19
    YZ Plane Selection
  18. YZ Plane Selection
    G19
  19. G20
    Inch System
  20. Inch System
    G20
  21. G21
    Metric System
  22. Metric System
    G21
  23. G28
    Rapid to Machine Zero Thur Reference Point
  24. Rapid to Machine Zero Thur Reference Point
    G28
  25. G40
    Tool Nose Comp.: Off
  26. Tool Nose Comp. Off
    G40
  27. G41
    Tool Nose Comp.: Left
  28. Tool Nose Comp. Left
    G41
  29. G42
    Tool Nose Comp.: Right
  30. Tool Nose Comp. Right
    G42
  31. G50
    Spindle Speed Maximum RPM Limit
  32. Spindle Speed Maximum RPM Limit
    G50
  33. G53
    Machine Zero Positioning Coordinate Shift
  34. Machine Zero Positioning Coordinate Shift
    G53
  35. G54 - G59
    Work Offset Positioning Coordinate #1-6
  36. Work Offset Positioning Coordinate #1-6
    G54 - G59
  37. G70
    Finishing Cycle
  38. Finishing Cycle
    G70
  39. G71
    OD/ID Stock Removal Cycle
  40. OD/ID Stock Removal Cycle
    G71
  41. G72
    Face Stock Removal Cycle
  42. Face Stock Removal Cycle
    G72
  43. G80
    Canned Cycle Cancel
  44. Canned Cycle Cancel
    G80
  45. G90
    Absolute Mode
  46. Absolute Mode
    G90
  47. G91
    Incrimental Mode
  48. Incrimental Mode
    G91
  49. G96
    Constant Surface Speed (CSS)
  50. Constant Surface Speed (CCS)
    G96
  51. G97
    RPM
  52. RPM
    G97
  53. G98
    Feed per Minute
  54. Feed per Minute
    G98
  55. G99
    Feed per Revolution
  56. Feed per Revolution
    G99
  57. M00
    Program: Stop
  58. Program Stop
    M00
  59. M01
    Program: Optional Stop
  60. Program Optional Stop
    M01
  61. M02
    Program: End
  62. Program End
    M02
  63. M30
    Program: End & Reset
  64. Program End & Reset
    M30
  65. M03
    Spindle: Forward
  66. Spindle Forward
    M03
  67. M04
    Spindle: Reverse
  68. Spindle Reserved
    M04
  69. M05
    Spindle: Stop
  70. Spindle Stop
    M05
  71. M08
    Coolant: On
  72. Coolant On
    M08
  73. M09
    Coolant: Off
  74. Coolant Off
    M09
  75. M23
    Angle Out of Thread: On
  76. Angle Out of Thread: On
    M23
  77. M24
    Angle Out of Thread: Off
  78. Angle Out of Thread: Off
    M24

What would you like to do?

Home > Flashcards > Print Preview