412 exam prep

Card Set Information

Author:
BlackWidow
ID:
288422
Filename:
412 exam prep
Updated:
2014-11-06 21:23:39
Tags:
412examprep
Folders:
n/a
Description:
Exam prep for the 412 exam
Show Answers:

Home > Flashcards > Print Preview

The flashcards below were created by user BlackWidow on FreezingBlue Flashcards. What would you like to do?


  1. You have a DHCP server named Server1. Server1 has one network adapter. Server1 is located on asubnet named Subnet1. Server1 has scope named Scope1. Scope1 contains IP addresses for the192.168.1.0/24 network. Your company is migrating the IP addresses on Subnet1 to use anetwork ID of 10.10.0.0/16. On Server1, you create a scope named Scope2. Scope2 contains IPaddresses for the 10.10.0.0/16 network. You need to ensure that clients on Subnet1 can receiveIP addresses from either scope. What should you create on Server1?

    A. A multicast scope
    B. A superscope 
    C. A split-scope
    D. A scope
    B. A superscope
    (this multiple choice question has been scrambled)
  2. Your network contains an Active Directory domain named adatum.com. The domain contains adomain controller named DC1 that runs Windows Server 2012 R2. On Dc1, you open DNSManager as shown in the exhibit.


    You need to change the zone type of the contoso.com zone from an Active Directory-integratedzone to a standard primary zone. What should you do before you change the zone type?
    A. Unsign the zone.
    B. Modify the Zone Signing Key (ZSK).
    C. Modify the Key Signing Key (KSK).
    D. Change the Key Master.
    A. Unsign the zone.
    (this multiple choice question has been scrambled)
  3. You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the DNS Serverserver role installed. You need to configure Server1 to resolve queries for single-label DNS names.Which two actions should you perform? (Each correct answer presents part of the solution.Choose two.)
    A. Run the Set-DNSServerGlobalNameZone cmdlet.
    B. Modify the DNS suffix search list setting.
    C. Modify the Primary DNS Suffix Devolution setting.
    D. Create a zone named “.”.
    E. Create a zone named GlobalNames.
    F. Run the Set-DNSServerRootHint cmdlet.
    • A. Run the Set-DNSServerGlobalNameZone cmdlet.
    • E. Create a zone named GlobalNames.
  4. Your network contains an Active Directory domain named contoso.com. The domain contains twoservers named Server1 and Server2 that run Windows Server 2012 R2. Server1 has the IP AddressManagement (IPAM) Server feature installed. Server2 has the DHCP Server server role installed.A user named User1 is a member of the IPAM Users group on Server1. You need to ensure thatUser1 can use IPAM to modify the DHCP scopes on Server2. The solution must minimize thenumber of permissions assigned to User1. To which group should you add User1?
    A. DHCP Administrators on Server2.
    B. IPAM ASM Administrators on Server1.
    C. IPAMUG in Active Directory.
    D. IPAM MSM Administrators on Server1.
    A. DHCP Administrators on Server2.
    (this multiple choice question has been scrambled)
  5. You have a server named DC2 that runs Windows Server 2012 R2. DC2 contains a DNS zonenamed adatum.com. The adatum.com zone is shown in the exhibit.


    You need to configure DNS clients to perform DNSSEC validation for the adatum.com DNS domain.What should you configure?
    A. The Network Connection settings.
    B. The DNS Client settings.
    C. A Name Resolution Policy.
    D. The Network Location settings.
    C. A Name Resolution Policy.
    (this multiple choice question has been scrambled)
  6. Your network contains an Active Directory domain named contoso.com. The domain contains twoservers named Server1 and Server2 that run Windows Server 2012 R2. Server1 has the DHCPServer server role installed. Server2 has the Hyper-V server role installed. Server2 has an IPaddress of 192.168.10.50. Server1 has a scope named Scope1 for the 192.168.10.0/24 network.You plan to deploy 20 virtual machines on Server2 that will be connected to the external network.The MAC addresses for the virtual machines will begin with 00-15-SD-83-03. You need toconfigure Server1 to offer the virtual machines IP addresses from 192.168.10.200 to192.168.10.21g. Physical computers on the network must be offered IP addresses outside this range. You want to achieve this goal by using the minimum amount of administrative effort. What should you do from the DHCP console?
    A. Delete Scope1 and create two new scopes.
    B. Configure Allow filters and Deny filters
    C. Create a policy.
    D. Create reservations.
    C. Create a policy.
    (this multiple choice question has been scrambled)
  7. Your network contains an Active Directory domain named contoso.com. The domain contains twoservers named Server1 and Server2. Both servers have the IP Address Management (IPAM)Server feature installed. You have a support technician named Tech1. Tech1 is a member of theIPAM Administrators group on Server1 and Server2. You need to ensure that Tech 1 can useServer Manager on Server1 to manage IPAM on Server2. To which group on Server2 should you add Tech1?
    A. Remote Management Users
    B. IPAM MSM Administrators
    C. IPAM Administrators
    D. WinRM Remote WM1 Users
    D. WinRM Remote WM1 Users
    (this multiple choice question has been scrambled)
  8. Your network contains two Active Directory forests named contoso.com and adatum.com. All ofthe domain controllers in both of the forests run Windows Server 2012 R2. The adatum.comdomain contains a file server named Servers. Adatum.com has a one-way forest trust tocontoso.com. A contoso.com user name User10 attempts to access a shared folder on Serversand receives the error message shown in the exhibit.

    You verify that the Authenticated Users group has Read permissions to the Data folder. You need to ensure that User10 can read the contents of the Data folder on Server5 in the adatum.comdomain. What should you do?
    A. Grant the Other Organization group Read permissions to the Data folder.
    B. Modify the list of logon workstations of the contoso\User10 user account.
    C. Modify the permissions on the Server5 computer object in Active Directory.
    D. Enable the Netlogon Service (NP-In) firewall rule on Server5.
    C. Modify the permissions on the Server5 computer object in Active Directory.
    (this multiple choice question has been scrambled)
  9. HOTSPOT
    Your network contains an Active Directory domain named contoso.com. The domain contains twoActive Directory sites named Site1 and Site2. You discover that when the account of a user inSite1 is locked out, the user can still log on to the servers in Site2 for up to 15 minutes by usingRemote Desktop Services (RDS). You need to reduce the amount of time it takes to synchronizeaccount lockout information across the domain. Which attribute should you modify?
    To answer, select the appropriate attribute in the answer area.
  10. Your network contains an Active Directory forest. The forest contains two domains namedcontoso.com and fabrikam.com. The functional level of the forest is Windows Server 2003. Youhave a domain outside the forest named adatum.com. You need to configure an access solutionto meet the following requirements:

     Users in adatum.com must be able to access resources in contoso.com.
     Users in adatum.com must be prevented from accessing resources in fabrikam.com.
     Users in both contoso.com and fabrikam.com must be prevented from accessing resources in adatum.com.

    What should you create?

    A. a one-way realm trust from adatum.com to fabrikam.com
    B. a one-way external trust from adatum.com to fabrikam.com
    C. a one-way realm trust from fabrikam.com to adatum.com
    D. a one-way external trust from fabrikam.com to adatum.com
    B. a one-way external trust from adatum.com to fabrikam.com
    (this multiple choice question has been scrambled)
  11. Your network contains an Active Directory domain named contoso.com. The domain contains amain office and a branch office. An Active Directory site exists for each office. All domaincontrollers run Windows Server 2012 R2. The domain contains two domain controllers. Thedomain controllers are configured as shown in the following table.


    DC1 hosts an Active Directory-integrated zone for contoso.com. You add the DNS Server serverrole to DC2. You discover that the contoso.com DNS zone fails to replicate to DC2. You verify thatthe domain, schema, and configuration naming contexts replicate from DC1 to DC2. You need to ensure that DC2 replicates the contoso.com zone by using Active Directory replication. Whichtool should you use?

    A. Active Directory Sites and Services

    B. Ntdsutil

    C. DNS Manager.

    D. Active Directory Domains and Trusts
    A. Active Directory Sites and Services
  12. Your network contains an Active Directory forest. The forest contains two domains namedcontoso.com and fabrikam.com. The functional level of the forest is Windows Server 2003. Thecontoso.com domain contains domain controllers that run either Windows Server 2008 orWindows Server 2008 R2. The functional level of the domain is Windows Server 2008. Thefabrikam.com domain contains domain controllers that run either Windows Server 2003 orWindows Server 2008. The functional level of the domain is Windows Server 2003. Thecontoso.com domain contains a member server named Server1 that runs Windows Server 2012R2.

    You install the Active Directory Domain Services server role on Server1.
    You need to addServer1 as a new domain controller in the contoso.com domain.
    What should you do?

    A. Run the Active Directory Domain Services Configuration Wizard.

    B. Run adprep.exe /domainprep, and then run dcpromo.exe.

    C. Raise the functional level of the forest, and then run dcprorno.exe.

    D. Modify the Computer Name/Domain Changes properties.
    A. Run the Active Directory Domain Services Configuration Wizard.
  13. Your network contains an Active Directory forest. The forest contains two domains namedcontoso.com and fabrikam.com. The forest functional level is Windows 2000. The contoso.comdomain contains domain controllers that run either Windows Server 2008 or Windows Server2008 R2. The domain functional level is Windows Server 2008. The fabrikam.com domaincontains domain controllers that run either Windows 2000 Server or Windows Server 2003. Thedomain functional level is Windows 2000 native. The contoso.com domain contains a memberserver named Server1 that runs Windows Server 2012 R2. You need to add Server1 as a newdomain controller in the contoso.com domain. What should you do first?

    A. Raise the functional level of the contoso.com domain to Windows Server 2008 R2.
    B. Upgrade the domain controllers that run Windows Server 2008 to Windows Server 2008 R2.
    C. Decommission the domain controllers that run Windows 2000.
    D. Raise the forest functional level to Windows Server 2003.
    E. Raise the functional level of the fabrikam.com domain to Windows Server 2003.
    C. Decommission the domain controllers that run Windows 2000.
    (this multiple choice question has been scrambled)
  14. Your network contains an Active Directory domain named adatum.com. The domain contains two domain controllers that run Windows Server 2012 R2. The domain controllers are configured as shown in the following table.



    You log on to DC1 by using a user account that is a member of the Domain Admins group, and then you create a new user account named User1. You need to pre populate the password for User1 on DC2.

    What should you do first?

    A. Add DC2 to the Allowed RODC Password Replication Policy group.
    B. Connect to DC2 from Active Directory Users and Computers.
    C. Add the User1 account to the Allowed RODC Password Replication Policy group.
    D. Run Active Directory Users and Computers as a member of the Enterprise Admins group.
    C. Add the User1 account to the Allowed RODC Password Replication Policy group.
    (this multiple choice question has been scrambled)
  15. Your company has offices in Montreal, New York, and Amsterdam. The network contains anActive Directory forest named contoso.com. An Active Directory site exists for each office. All ofthe sites connect to each other by using the DEFAULTIPSITE1INK site link. You need to ensure thatonly between 20:00 and 08:00, the domain controllers in the Montreal office replicate the ActiveDirectory changes to the domain controllers in the Amsterdam office. The solution must ensurethat the domain controllers in the Montreal and the New York offices can replicate the ActiveDirectory changes any time of day. What should you do?

    A. Create a new site link that contains Montreal and Amsterdam. Remove Amsterdam from DEFAULTIPSITE1INK. Modify the schedule of DEFAULTIPSITE1INK.

    B. Create a new site link that contains Montreal and Amsterdam. Create a new site link bridge.Modify the schedule of DEFAU LTIPSITE1INK.

    C. Create a new site link that contains Montreal and Amsterdam. Remove Amsterdam fromDEFAULTIPSITE1INK. Modify the schedule of the new site link.

    D. Create a new site link that contains Montreal and Amsterdam. Create a new site link bridge. Modify the schedule of the new site link.
    C. Create a new site link that contains Montreal and Amsterdam. Remove Amsterdam fromDEFAULTIPSITE1INK. Modify the schedule of the new site link.
  16. Your network contains two Active Directory forests named contoso.com and adatum.com. A two-way forest trust exists between the forests. The contoso.com forest contains an enterprise certification authority (CA) named Server1. You implement cross-forest certificate enrollment between the contoso.com forest and the adatum.com forest. On Server1, you create a new certificate template named Template1. You need to ensure that users in the adatum.com forest can request certificates that are based on Template1. Which tool should you use?

    A. DumpADO.ps1

    B. Repadmin

    C. Add-CATemplate

    D. Certutil

    E. PKISync.ps1
    E. PKISync.ps1
  17. Your network contains an Active Directory domain named adatum.com. The domain containsfour servers. The servers are configured as shown in the following table.



    You plan to deploy an enterprise certification authority (CA) on a server named Server5. Server5 will be used to issue certificates to domain-joined computers and work group computers. You need to identify which server you must use as the certificate revocation list (CRL) distribution point for Server5. Which server should you identify?

    A. Server3

    B. Server2

    C. Server4

    D. Server1
    C. Server4
  18. You have a server named Server1 that has the Active Directory Certificate Services server roleinstalled. Server1 uses a hardware security module (HSM) to protect the private key of Server1.You need to ensure that the Active Directory Certificate Services (AD CS) database, log files, andprivate key are backed up. You perform regular backups of the HSM module by using a backuputility provided by the HSM manufacturer. What else should you do?

    A. Run the certutil.exe command and specify the -backupkey parameter.
    B. Run the certutil.exe command and specify the -backup parameter.
    C. Run the certutil.exe command and specify the -backupdb parameter.
    D. Run the certutil.exe command and specify the -dump parameter.
    C. Run the certutil.exe command and specify the -backupdb parameter.
    (this multiple choice question has been scrambled)
  19. Your network contains an Active Directory domain named contoso.com. The domain contains aserver named Server1 that runs Windows Server 2012 R2. Server1 has the Active Directory Federation Services (AD FS) server role installed. Adatum.com is a partner organization. You are helping the administrator of adatum.com set up a federated trust between adatum.com andcontoso.com. The administrator of adatum.com asks you to provide a file containing the federation metadata of contoso.com. You need to identify the location of the federation metadata file. Which node in the AD FS console should you select?
  20. Your network contains three Active Directory forests. Each forest contains an Active Directory Rights Management Services (AD RMS) root cluster. All of the users in all of the forests must be able to access protected content from any of the forests. You need to identify the minimum number of AD RMS trusts required. How many trusts should you identify?
    A. 6
    B. 4
    C. 2
    D. 3
    A. 6
    (this multiple choice question has been scrambled)
  21. Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2012 R2. The domain contains a domain controller named DC1 that is configured as an enterprise root certification authority (CA). All users in the domain are issued a smart card and are required to log on to their domain-joined client computer by using their smart card. A usernamed User1 resigned and started to work for a competing company. You need to prevent User1 immediately from logging on to any computer in the domain. The solution must not prevent other users from logging on to the domain. Which tool should you use?

    A. Certificate Templates
    B. Active Directory Administrative Center
    C. Server Manager
    D. Active Directory Sites and Services
    B. Active Directory Administrative Center
    (this multiple choice question has been scrambled)
  22. Your network contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed. Server1 hosts 10 virtual machines that run Windows Server 2012 R2. You add a new server named Server2. Server2 has faster hard disk drives, more RAM, and a different processor manufacturer than Server1. You need to move all of the virtual machines from Server1 to Server2. The solution must minimize downtime. What should you do for each virtual machine?

    A. Perform a live migration.
    B. Perform a storage migration.
    C. Export the virtual machines from Server1 and import the virtual machines to Server2.
    D. Perform a quick migration.
    C. Export the virtual machines from Server1 and import the virtual machines to Server2.
    (this multiple choice question has been scrambled)
  23. You have a data center that contains six servers. Each server has the Hyper-V server role installed and runs Windows Server 2012 R2. The servers are configured as shown in the following table.


    Host4 and Host5 are part of a cluster named Cluster1. Cluster1 hosts a virtual machine named VM1. You need to move VM1 to another Hyper-V host. The solution must minimize the downtime of VM1. To which server and by which method should you move VM1?

    A. To Host2 by using a live migration.
    B. To Host1 by using a quick migration.
    C. To Host3 by using a storage migration.
    D. To Host6 by using a storage migration.
    C. To Host3 by using a storage migration.
    (this multiple choice question has been scrambled)
  24. Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2. All servers run Windows Server 2012 R2. Server1 and Server2 have the Failover Clustering feature installed. The servers are configured as nodes in a failover cluster named Cluster1. Cluster1 hosts an Application named App1. You need to ensure that Server2 handles all of the client requests to the cluster for App1. The solution must ensure that if Server2 fails, Server1 becomes the active node for App1.

    What should you configure?


    A. Live migration
    B. The Handling priority
    C. The host priority
    D. Affinity-None
    E. the Scale-Out File Server
    F. The failover settings
    G. The possible owner
    H. The cluster quorum settings
    I. Quick migration
    J. Affinity-Single
    K. A file server for general use
    L. The preferred owner
    L. The preferred owner
    (this multiple choice question has been scrambled)
  25. Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2. All servers run Windows Server 2012 R2. Server1 and Server2 have the Failover Clustering feature installed. The servers are configured as nodes in a failover cluster named Cluster1. You add two additional nodes to Cluster1. You need to ensure that Cluster1 stops running if three nodes fail. What should you configure?

    A. Live migration
    B. The possible owner
    C. The failover settings
    D. The Handling priority
    E. Affinity-None
    F. the Scale-Out File Server
    G. The preferred owner
    H. Affinity-Single
    I. The cluster quorum settings
    J. A file server for general use
    K. Quick migration
    L. The host priority
    I. The cluster quorum settings
    (this multiple choice question has been scrambled)
  26. Your network contains an Active Directory domain named contoso.com. The domain contains twomember servers named Server1 and Server2. All servers run Windows Server 2012 R2. Server1and Server2 have the Failover Clustering feature installed. The servers are configured as nodes ina failover cluster named Cluster1. You configure File Services and DHCP as clustered resources forCluster1. Server1 is the active node for both clustered resources. You need to ensure that if twoconsecutive heartbeat messages are missed between Server1 and Server2, Server2 will beginresponding to DHCP requests. The solution must ensure that Server1 remains the active node for the File Services clustered resource for up to five missed heartbeat messages. What should you configure?


    A. Affinity-None
    B. Affinity-Single
    C. The Handling priority
    D. The failover settings
    E. Quick migration
    F. The preferred owner
    G. the Scale-Out File Server
    H. The host priority
    I. Live migration
    J. The possible owner
    K. A file server for general use
    L. The cluster quorum settings
    D. The failover settings
    (this multiple choice question has been scrambled)
  27. Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2. All servers run Windows Server 2012 R2. Server1 and Server2 have the Failover Clustering feature installed. The servers are configured as nodes in a failover cluster named Cluster1. You add two additional nodes to Cluster1. You have a folder named Folder1 on Server1 that contains App1ication data. You plan to provide continuously available access to Folder1. You need to ensure that all of the nodes in Cluster1 can actively respond to the client requests for Folder1. What should you configure?

    A. the Scale-Out File Server
    B. The Handling priority
    C. Affinity-None
    D. The failover settings
    E. Quick migration
    F. The cluster quorum settings
    G. Affinity-Single
    H. A file server for general use
    I. The preferred owner
    J. The host priority
    K. The possible owner
    L. Live migration
    A. the Scale-Out File Server
    (this multiple choice question has been scrambled)
  28. Information and details provided in a question App1y only to that question. Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2. All servers run Windows Server 2012 R2. Server1 and Server2 have the Network Load Balancing (NLB) feature installed. The servers are configured as nodes in an NLB cluster named Cluster1. Cluster1 hosts a secure web App1ication named WebApp1. WebApp1 saves user state information locally on each node. You need to ensure that when users connect to WebApp1, their session state is maintained. What should you configure?

    A. The failover settings
    B. Affinity-None
    C. Affinity-Single
    D. Live migration
    E. The host priority
    F. Quick migration
    G. A file server for general use
    H. the Scale-Out File Server
    I. The cluster quorum settings
    J. The possible owner
    K. The Handling priority
    L. The preferred owner
    C. Affinity-Single
    (this multiple choice question has been scrambled)
  29. Your company has a main office and a branch office. The main office contains a file server named Server1. Server1 has the BranchCache for Network Files role service installed. The branch office contains a server named Server2. Server2 is configured as a BranchCache hosted cache server. You need to preload the data from the file shares on Server1 to the cache on Server2. You generate hashes for the file shares on Server1. Which cmdlet should you run next?

    A. Add-BCDataCacheExtension
    B. Export-BCCachePackage
    C. Publish-BCFileContent
    D. Set-BCCache
    B. Export-BCCachePackage
    (this multiple choice question has been scrambled)
  30. Your company has a main office and a branch office. The main office is located in Detroit. The branch office is located in Seattle. The network contains an Active Directory domain named adatum.com. Client computers run either Windows 7 Enterprise or Windows 8 Enterprise. The main office contains 1,000 client computers and 50 servers. The branch office contains 20 client computers. All computer accounts for the branch office are located in an organizational unit (OU)named Seattle Computers. A Group Policy object (GPO) named GPO1 is linked to the Seattle Computers OU. You need to configure BranchCache for the branch office.
  31. Your network contains an Active Directory domain named contoso.com. All file servers in the domain run Windows Server 2012 R2. The computer accounts of the file servers are in an organizational unit (OU) named OU1. A Group Policy object (GPO) named GPO1 is linked to OU1.You plan to modify the NTFS permissions for many folders on the file servers by using central access policies. You need to identify any users who will be denied access to resources that they can currently access once the new permissions are implemented. In which order should you Perform the five actions?

  32. You have a file server named Server1 that runs Windows Server 2012 R2. Data Deduplication is enabled on drive D of Server1. You need to exclude D:\Folder1 from Data Deduplication. What should you configure?

    A. the classification rules in File Server Resource Manager (FSRM)
    B. the properties of D:\Folder1
    C. File and Storage Services in Server Manager
    D. Disk Management in Computer Management
    C. File and Storage Services in Server Manager
    (this multiple choice question has been scrambled)
  33. You manage an environment that has many servers. The servers run Windows Server 2012 R2and use iSCSI storage.
    Administrators report that it is difficult to locate available iSCSI resources on the network. You need to ensure that the administrators can locate iSCSI resources on the network by using a central repository. Which feature should you deploy?

    A. The iSCSI Target Server role service.
    B. The iSNS Server service feature.
    C. The iSCSI Target Storage Provider feature.
    D. The Windows Standards-Based Storage Management feature.
    B. The iSNS Server service feature.
    (this multiple choice question has been scrambled)
  34. Your network contains an Active Directory domain named contoso.com. The network contains a file server named Server1 that runs Windows Server 2012 R2. You create a folder named Folder1. You share Folder1 as Share1. The NTFS permissions on Folder1 are shown in the Folder1 exhibit.



    The Everyone group has the Full control Share permission to Folder1.You configure a central access policy as shown in the Central Access Policy exhibit.






    Members of the IT group report that they cannot modify the files in Folder1. You need to ensure that the IT group members can modify the files in Folder1. The solution must use central access policies to control the permissions. Which two actions should you perform?(Each correct answer presents part of the solution. Choose two.)

    A. On the Classification tab of Folder1, set the classification to Information Technology.

    B. On the Security tab of Folder1, add a conditional expression to the existing permission entryfor the IT group.

    C. On Share1, assign the Change Share permission to the IT group.

    D. On the Security tab of Folder1, remove the permission entry for the IT group.

    E. On the Security tab of Folder1, assign the Modify permission to the Authenticated Usersgroup.
    A. On the Classification tab of Folder1, set the classification to Information Technology.

    E. On the Security tab of Folder1, assign the Modify permission to the Authenticated Usersgroup.
  35. You have a server named File1 that runs Windows Server 2012 R2. Fuel has the File Server roleservice installed. You plan to back up all shared folders by using Microsoft Online Backup. You download and install the Microsoft Online Backup Service Agent on File1. You need to ensurethat you use Windows Server Backup to back up data to Microsoft Online Backup. What should you do?

    A. From a command prompt, run wbadmin.exe enable backup.
    B. From the Services console, modify the Log On settings of the Microsoft Online BackupService Agent.
    C. From Computer Management, add the File1 computer account to the Backup Operatorsgroup.
    D. From Windows Server Backup, run the Register Server Wizard.
    D. From Windows Server Backup, run the Register Server Wizard.
    (this multiple choice question has been scrambled)
  36. Your network contains an Active Directory domain named contoso.com. You are creating acustom Windows Recovery Environment (Windows RE) image. You need to ensure that when aserver starts from the custom Windows RE image, a drive is mapped automatically to a networkshare. What should you modify in the image?

    A. Xsl-mappings.xml
    B. smb.types.ps1xml
    C. Win.ini
    D. startnet.cmd
    D. startnet.cmd
    (this multiple choice question has been scrambled)
  37. You have a file server named Server1 that runs a Server Core Installation of Windows Server 2012R2. You need to ensure that users can access previous versions of files that are shared on Server1by using the Previous Versions tab. Which tool should you use?

    A. Vssadmin
    B. Storrept
    C. Diskpart
    D. Wbadmin
    A. Vssadmin
    (this multiple choice question has been scrambled)
  38. You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Windows Deployment Services server role installed. You back up Server1 each day by using Windows Server Backup. The disk array on Server1 fails. You replace the disk array. You need to restore Server1 as quickly as possible. What should you do?

    A. Start Server1 from the Windows Server 2012 R2 installation media.
    B. Start Server1 by using the PXE.
    C. Start Server1 and press Shift+F8.
    D. Start Server1and press F8.
    A. Start Server1 from the Windows Server 2012 R2 installation media.
    (this multiple choice question has been scrambled)
  39. Your network contains two servers named Server1 and Server2 that run Windows Server 2012 R2. Both servers have the Hyper-V server role installed. Server1 and Server2 are located in different offices. The offices connect to each other by using a high-latency WAN link. Server2 hosts a virtual machine named VM1. You need to ensure that you can start VM1 on Server1 if Server2 fails. The solution must minimize hardware costs. What should you do?

    A. On Server2, install the Multipath I/O (MPIO) feature. Modify the storage location of the VHDsfor VM1.
    B. From the Hyper-V Settings of Server2, modify the Replication Configuration settings. Enablereplication for VM1.
    C. On Server1, install the Multipath I/O (MPIO) feature. Modify the storage location of the VHDsfor VM1.
    D. From the Hyper-V Settings of Server1, modify the Replication Configuration settings. Enablereplication for VM1.
    D. From the Hyper-V Settings of Server1, modify the Replication Configuration settings. Enablereplication for VM1.
    (this multiple choice question has been scrambled)
  40. You have a server named Server1 that runs Windows Server 2012 R2. You modify the propertiesof a system driver and you restart Server1. You discover that Server1 continuously restarts without starting Windows Server 2012 R2. You need to start Windows Server 2012 R2 on Server1 in the least amount of time. The solution must minimize the amount of data loss. Which Advanced Boot Option should you select?

    A. Last Known Good Configuration (advanced)
    B. Disable automatic restart on system failure
    C. Disable Driver Signature Enforcement
    D. Repair Your Computer
    A. Last Known Good Configuration (advanced)
    (this multiple choice question has been scrambled)
  41. Your network contains an Active Directory domain named contoso.com. The domain contains three servers named Server1, Server2, and Server3 that run Windows Server 2012 R2. All three servers have the Hyper-V server role installed and the Failover Clustering feature installed. Server1 and Server2 are nodes in a failover cluster named Cluster1. Several highly available virtual machines run on Cluster1. Cluster1 has the Hyper-V Replica Broker role installed. The Hyper-V Replica Broker currently runs on Server1. Server3 currently has no virtual machines. You need to configure Cluster1 to be a replica server for Server3 and Server3 to be a replica server for Cluster1. Which two tools should you use? (Each correct answer presents part of the solution.Choose two.)

    A. The Hyper-V Manager console connected to Server1.
    B. The Failover Cluster Manager console connected to Cluster1.
    C. The Hyper-V Manager console connected to Server3.
    D. The Hyper-V Manager console connected to Server2.
    E. The Failover Cluster Manager console connected to Server3.
    C. The Hyper-V Manager console connected to Server3.

    D. The Failover Cluster Manager console connected to Cluster1.
    (this multiple choice question has been scrambled)
  42. You have a file server named Server1 that runs Windows Server 2012 R2. The folders on Server1are configured as shown in the following table.



    A new corporate policy states that backups must use Microsoft Online Backup whenever possible.You need to identify which technology you must use to back up Server1. The solution must use Microsoft Online Backup whenever possible. What should you identify?To answer, drag the appropriate backup type to the correct location or locations. Each backup type may be used once, more than once, or not at all. 

  43. Your network contains an Active Directory domain named contoso.com. The domain contains adomain controller named DC1 and a member server named Server1. Server1 has the IP AddressManagement (IPAM) Server feature installed. On Dc1, you configure Windows Firewall to allow all of the necessary inbound ports for IPAM. On Server1, you open Server Manager as shown in the exhibit.



    You need to ensure that you can use IPAM on Server1 to manage DNS on DC1. What should you do?

    A. Modify the outbound firewall rules on Server1.

    B. Modify the inbound firewall rules on Server1.

    C. Add Server1 to the Remote Management Users group.

    D. Add Server1 to the Event Log Readers group.
    D. Add Server1 to the Event Log Readers group.
  44. Your network contains an Active Directory domain named contoso.com. The domain contains servers named Server1 and Server2 that run Windows Server 2012 R2. Server1 has the IP Address Management (IPAM) Server feature installed. You install the IPAM client on Server2. You open Server Manager on Server2 as shown in the exhibit.



    You need to manage IPAM from Server2. What should you do first?

    A. On Server1, add the Server2 computer account to the IPAM ASM Administrators group.
    B. On Server2, open Computer Management and connect to Server1.
    C. On Server2, add Server1 to Server Manager.
    D. On Server1, add the Server2 computer account to the IPAM MSM Administrators group.
    C. On Server2, add Server1 to Server Manager.
    (this multiple choice question has been scrambled)
  45. Your network contains an Active Directory domain named contoso.com. The domain contains adomain controller named Dc1. DC1 has the DNS Server server role installed. The network has two sites named Site1 and Site2. Site1 uses 10.10.0.0/16 IP addresses and Site2 uses 10.11.0.0/16 IPaddresses. All computers use DC1 as their DNS server. The domain contains four servers namedServer1, Server2, Server3, and Server4. All of the servers run a service named Service1. DNS hostrecords are configured as shown in the exhibit.




    You discover that computers from the 10.10.1.0/24 network always resolve Service1 to the IP address of Server1. You need to configure DNS on DC1 to distribute computers in Site1 between Server1 and Server2 when the computers attempt to resolve Service1. What should run on DC1?

    A. dnscmd /config /localnetpriority 0
    B. dnscmd /config /localnetprioritynetmask 0x0000ffff
    C. dnscmd /config /roundrobin 0
    D. dnscmd /config /bindsecondaries 1
    B. dnscmd /config /localnetprioritynetmask 0x0000ffff
    (this multiple choice question has been scrambled)
  46. Your network contains an Active Directory domain named contoso.com. The domain contains amain office and a branch office. An Active Directory site exists for each office. The domain contains two servers named Server1 and Server2 that run Windows Server 2012 R2. Both servers have the DHCP Server server role installed. Server1 is located in the main office site. Server2 is located in the branch office site. Server1 provides IPv4 addresses to the client computers in themain office site. Server2 provides IPv4 addresses to the client computers in the branch office site.You need to ensure that if either Server1 or Server2 are offline, the client computers can still obtain IPv4 addresses. The solution must meet the following requirements:

     The storage location of the DHCP databases must not be a single point of failure.
     Server1 must provide IPv4 addresses to the client computers in the branch office site only ifServer2 is offline.
     Server2 must provide IPv4 addresses to the client computers in the main office site only ifServer1 is offline.

    Which configuration should you use?

    A. Hot standby mode failover partners
    B. A failover cluster
    C. load sharing mode failover partners
    D. A Network Load Balancing (NLB) cluster
    A. Hot standby mode failover partners
    (this multiple choice question has been scrambled)
  47. You have a DHCP server named Server1. Server1 has an IP address 192.168.1.2 is located on asubnet that has a network ID of 192.168.1.0/24. On Server1, you create the scopes shown in the following table.



    You need to ensure that Server1 can assign IP addresses from both scopes to the DHCP clients onthe local subnet. What should you create on Server1?

    A. A superscope
    B. A split-scope
    C. A multicast scope
    D. A scope
    A. A superscope
    (this multiple choice question has been scrambled)
  48. Your network contains servers that run Windows Server 2012 R2. The network contains a largenumber of iSCSI storage locations and iSCSI clients. You need to deploy a central repository thatcan discover and list iSCSI resources on the network automatically. Which feature should youdeploy?

    A. the Windows Standards-Based Storage Management feature
    B. the iSCSI Target Storage Provider feature
    C. the iSNS Server service feature
    D. the iSCSI Target Server role service
    C. the iSNS Server service feature
    (this multiple choice question has been scrambled)

What would you like to do?

Home > Flashcards > Print Preview