The flashcards below were created by user louisjamesreeves on FreezingBlue Flashcards.

  1. To move a virtual machine with its snapshot in place- what do you do
    you need to do a storage vmotion
  2. The load is high on a HA/DRS cluster. DPM is enabled. A vSphere administrator determines that hosts are NOT powering on automatically to support the load. Which configuration would result in this condition?
    DRS is set to manual operation
  3. An ESXi 5-x host disconnects within 60 seconds after the administrator adds it to the Center Server inventory. The administrator determines that the issue could be related to a networking problem. Which networking port should the administrator check for connectivity from the host to vCenter Server?
    Port 902
  4. A vSphere administrator configures a preferred heartbeat datastore in an HA/DRS cluster configuration. The vCenter Server identifies an alternative preferred datastore_ Why would vCenter Server identify an alternative preferred datastore over the administrator's ?
    The selected datastore is not accessible to all of the hosts.
  5. An error occurs while building a new 'virtual machine with a thin provisioned virtual disk size of 20GB. The datastore has 35GB of free space. The datastore is overcommitted by 95GB What is preventing the virtual machine from being built?
    The datastore is built on a thin provisioned LUN that has run out of storage array free space.
  6. A SAN administrator recently installed a storage encryption switch on the Fibre Channel Fabric Shortly after the deployment, several new VMFS5 datastores recently created were dismounted. Attempts to manually mount them fail. VMFS5 upgraded datastores are unaffected. Al Storage arrays in use support VASA and VAAI What is the root cause of this problem?
    All newly created VMFS5 datastores are tagged ATS Only. The storage encryption switch blocks the ATS command.
  7. An administrator adds an ESXi 5.x host to the inventory of a Center Server that is configured with a vSphere Distributed Switch. The vSphere Web Client indicates that the host is not responding. The administrator determines from the command line that the vpxa agent is stopped What should the administrator do to resolve this issue without affecting the uptime of the virtual machines running on the host?
    Restart the management agents in the host's DCUI
  8. An ESXi host's networking is configured as shown. The virtual machine named FileserverOI is unable to ping anything on an external network: Which condition would explain this behavior?
    The Fileserver01 virtual machine is not running.

    • A vSphere administrator enables and configures a Software iSCSI Initiator, and configures an iSCSI vmkernel portgroup with Port Binding. The SAN administrator creates a few LUNS on an iSCSI server. However, when the vSphere administrator adds the IP address of the iSCSI server in the Dynamic Discovery list, no iSCSI targets are detected. What condition would result in this behavior?
    • The iSCSl vmkernel portgroup and the iSCSl server are on different subnets.
  9. An administrator needs to modify a 'virtual machine alert to increase the threshold value of the trigger Once connected to the Center Server, the administrator navigates to the virtual machine to make the change. However, the administrator is unable to edit the alarm. What is the reason that this alarm cannot be edited?
    The alarm was not defined on this inventory object
Card Set:
2015-02-09 00:49:21

Show Answers: