Rules 20 rusty rail condition and Rule 21 removing tracks from service.-2.txt
Home > Preview
The flashcards below were created by user
on FreezingBlue Flashcards.
Only one train at a time may operate in the controlled block where ____ ___ notification is in effect.
The RTC must verbally inform the engineer of rusty rail conditions on route of the train and must issue a ____ _ ___ _ for the train to stop and warn at all highway grade crossings with automatic warning devices where rusty rail conditions exist.
Form M. Line 6.
When removing tracks from service where MBS or CTC rules are in effect a ____ _ ___ _must be issued to the RWIC requesting the use of the track. The affected track is ____ __ __ _____.
Form M Line 3, the affected track is clear of all movements.
MBS or CTC rules do not apply within the ___ __ _____ ____. Trains and track cars must operate at _____ _____.
Out of service track, restricted speed.
Where the limits of the out of service track are not protected by interlocking or block limit signal, the location of a ______ ______ and ____ ___will be shown on Form M Line 3.
Secured barricade and stop sign.
To allow a train to use the in service portion of track between the nearest interlocking and the out of service limit, the RTC must not ____ _ _____ ___ ___ ________.
Display a signal for the movement.
The location of the limit of the out of service track must be shown in a ______ ______ or issued to the train by ____ _.
Bulletin order or issued to the train by Form M.
Additional equipment, or employees may enter the out of service track after receiving permission of the ____.
The RWIC must ___ __ ____ a copy of the Form M taking the track out of service to the employee in charge.
Read or show.
The RWIC of the out of service track must write on his copy of the Form M, in the section of the line 3 labeled Additional Equipment or Employees authorized to use out of service track:
1) the name of the employee in charge of the additional equipment or employees.
2) the location where the equipment or employees will be working
3) the Time the Form M was read or shown to the employee in charge.
If additional equipment is entering the out of service track at an interlocking, the RTC will not authorize the additional equipment to pass the stop signal governing the out of service track until he has confirmed that the employee in charge of the additional equipment or employees have the _______ __ __ _____.
Have the permission of the RWIC.
Trains and track cars on out of service tracks must ____ and ____ at crossings equipped with automatic warning devices.
Stop and warn.
When two or more consecutive controlled blocks are removed from service, interlocking signals and interlocking rules at intermediate interlocking _____ __ ______.
Remain in service.
Where interlocking rules are in effect, tracks will be taken out of service with ____ _____ of the RTC.
Verbal permission of the RTC.
When necessary to remove AC or DC traction power from an out of service track, the ____ will first be removed from service then the ______ ____ will be removed.
Track, then the traction power.
What would you like to do?
Home > Flashcards > Print Preview