CCENT Chapter 1 Quiz

Card Set Information

Author:
myzticmoons
ID:
308776
Filename:
CCENT Chapter 1 Quiz
Updated:
2015-09-29 23:00:54
Tags:
CCENT
Folders:
cent
Description:
CCENT Chapter 1 Quiz
Show Answers:

Home > Flashcards > Print Preview

The flashcards below were created by user myzticmoons on FreezingBlue Flashcards. What would you like to do?


  1. Which of the following defines a node?

    A) Any device with a connection to a network.
    B) Any device with an address on a network.
    C) Any device on wireless
    D) Any device processing data
    B) Any device with an address on a network.
    (this multiple choice question has been scrambled)
  2. Which of the following is/are true regarding hex digits? (Choose all that apply.)
    A) Hex digits are made of 4 bits.
    B) Hex digits are made of 4 bytes.
    C) Hex can be expressed as 0-9 and A-G.
    D) Hex can be expressed as 0-9 and A-F.
    • A) Hex digits are made of 4 bits.
    • D) Hex can be expressed as 0-9 and A-F.
  3. Which physical topology has all systems connecting to a central connection device?

    A) Star
    B) Bus
    C) Ring
    D) Mesh
    A) Star
    (this multiple choice question has been scrambled)
  4. Which addresses do Physical layer devices--such as repeaters and hubs--examine in order to make a forwarding decision?

    A) Logical
    B) Physical
    C) None of these
    D) Host
    C) None of these
    (this multiple choice question has been scrambled)
  5. A network designer is asked to recommend a media type. The customer desires a Fast Ethernet network, but wishes to keep costs at a minimum. Which of the following media types should be recommended?

    A) SMF
    B) Cat3 UTP
    C) Cat5 UTP
    D) MMF
    C) Cat5 UTP
    (this multiple choice question has been scrambled)
  6. A customer maintains a twisted pair network. The customer wishes to attain Fast Ethernet speeds, and wishes to take steps to prevent EMI as much as possible. Which cable type would you recommend?

    A) SMF
    B) Cat5 UTP
    C) Cat5e UTP
    D) Cat5 STP
    D) Cat5 STP
    (this multiple choice question has been scrambled)
  7. Which cable type would be used to connect a PC to a router?

    A) Crossover
    B) None of these
    C) Straight-through
    D) Rollover
    A) Crossover
    (this multiple choice question has been scrambled)
  8. Which cable type would be used to connect a router to a switch?

    A) None of these
    B) Rollover
    C) Crossover
    D) Straight-through
    D) Straight-through
    (this multiple choice question has been scrambled)
  9. 100 Mb equals which one of the following?

    A) 1.25 MB
    B) 12.5 GB
    C) 12.5 MB
    D) 1.25 GB
    C) 12.5 MB
    (this multiple choice question has been scrambled)
  10. Which one of the following is a layout or bird's-eye veiw of your network?

    A) WAN
    B) Protocol Suite
    C) LAN
    D) Topology
    D) Topology
    (this multiple choice question has been scrambled)
  11. What does 1 GB equal?

    A) 1000 Mb
    B) 10 MB
    C) 100 Mb
    D) 1000 MB
    A) 1000 Mb
    (this multiple choice question has been scrambled)
  12. What does 8 bits equal?

    A) A byte
    B) $0.75
    C) 1 Kb
    D) A nibble
    A) A byte
    (this multiple choice question has been scrambled)

What would you like to do?

Home > Flashcards > Print Preview