API 510 Study Guide Questions Section 1- Scope

Card Set Information

Author:
egf4201
ID:
312043
Filename:
API 510 Study Guide Questions Section 1- Scope
Updated:
2015-11-25 10:42:53
Tags:
API 510 Study Guide Questions Section Scope
Folders:
API 510 Study Guide Questions Section 1- Scope
Description:
API 510 Study Guide Questions Section 1- Scope
Show Answers:

Home > Flashcards > Print Preview

The flashcards below were created by user egf4201 on FreezingBlue Flashcards. What would you like to do?


  1. Which of the following activities is not included in the scope of API 510?
    A) Rerating a vessel
    B) Replacing a vessel head
    C) Internally inspecting a vessel
    D) Operating a vessel
    D) Operating a vessel
    (this multiple choice question has been scrambled)
  2. Which of the following activities is not included in the scope of API 510?
    A) Setting relief device intervals
    B) Performing vessel alterations
    C) Performing vessel fabrication
    D) Performing vessel maintenance
    C) Performing vessel fabrication
    (this multiple choice question has been scrambled)
  3. Which of the following equipment types is not covered by API 510?
    A) Process heater (furnace)
    B) Distillation column
    C) Heat exchanger
    D) Safety relief valve
    A) Process heater (furnace)
    (this multiple choice question has been scrambled)
  4. API 510 is used
    by petro-chemical facilities
  5. API 510 covers vessels constructed to which fabrication code(s)?
    A) Only ASME B&PV Sect VIII
    B) Only ASME B&PV Sect VIII and the API/ASME code for Unfired Pressure
    C) ASME B&PV Sect. VIII and other current codes (except the French vessel code)
    D) any fabrication code
    D) any fabrication code
    (this multiple choice question has been scrambled)
  6. API 510 takes effect:
    Once the vessel is placed in service
  7. During alterations most of the code requirements come from:
    ASMESection VIII or the construction code
  8. Companies that use API 510 must
    Either employ or have access to an authorized inspection agency
  9. During a vessel repair, if there is a conflict between the requirements of API 510 and the construction code which should be followed?
    API 510
  10. During a vessel alteration, if there is a conflict between the requirements of API 510 and the construction code which should be followed?
    API 510
  11. An in-service vessel is being repaired or altered. If there is a conflict between the requirements of API 510 and the legal jurisdiction, which should be followed?
    The most stringent requirements
  12. An in-service vessel is inspected. If there is a conflict between the requirements of API 510 and the legal jurisdiction, which should be followed?
    The most stringent requirements
  13. A S.S. vessel has a MAWP of 10 psig at 700°F. The vessel has a diameter of 24" and a length of 8'. The remaining life of the vessel is 48 years. What is the max interval?
    Based on owner/user procdure
  14. An insulated C.S. vessel has a MAWP of 220 psig @ 200°F. The vessel has a dia. of 4.5" and a length of 8'. A thinned area from CUI corrosion needs to be repaired. The repair must be in accordance with:
    owner/user procedure
  15. Which of the following vessels is considered outside the scope of API 510?
    A) a 10' long cylindrical vessel which has a 9" I.D.
    B) Vessel stamped with the UM code symbol
    C) 1000 psig hydrotreater reactor built to the Japanese pressure vessel code
    D) a sphere rated for 20 psig
    B) Vessel stamped with the UM code symbol
    (this multiple choice question has been scrambled)
  16. Which code is used for F.F.S. evaluations?
    API 579
  17. Which code is used for RBI assessments
    API 580

What would you like to do?

Home > Flashcards > Print Preview