Study Guide Section 3-Definitions missed questions

Home > Preview

The flashcards below were created by user egf4201 on FreezingBlue Flashcards.


  1. A CML is
    either a small spot on the vessel/nozzle or a plane through a nozzle section
  2. Which of the following does not contribute to fatigue damage?
    A) Cyclic mechanical loadings
    B) Cyclic pressure loadings
    C) Cyclic temperature loadings
    D) Cyclic platform loadings
    D) Cyclic platform loadings
    (this multiple choice question has been scrambled)
  3. During a process outage, a vessel is considered
    in service
  4. A management of change (MOC) work process should be completed prior to
    either physical or process changes
  5. MAT is defined as the
    minimum allowed temperature
  6. Internal distributor piping is
    considered a non-pressure boundary vessel component
  7. The physical activities that are conducted to check conformance with specifications are called
    quality control
  8. A pressure test used after maintenance work to assure that the equipment is leak free
    is called a tightness test

Card Set Information

Author:
egf4201
ID:
314703
Filename:
Study Guide Section 3-Definitions missed questions
Updated:
2016-01-25 20:23:17
Tags:
Study Guide Section Definitions missed questions
Folders:
Study Guide Section 3-Definitions missed questions
Description:
Study Guide Section 3-Definitions missed questions
Show Answers:

Home > Flashcards > Print Preview