G Codes

Home > Preview

The flashcards below were created by user JTManchild on FreezingBlue Flashcards.


  1. Rapid Positioning Motion

    A) G00
    B) G15
    C) G10
    D) G01
    A) G00
    (this multiple choice question has been scrambled)
  2. Linear Interpolation Motion

    A) G01
    B) G02
    C) G15
    D) G56
    A) G01
    (this multiple choice question has been scrambled)
  3. Circular Interpolation Motion CW

    A) G24
    B) G00
    C) G02
    D) G01
    C) G02
    (this multiple choice question has been scrambled)
  4. Circular Interpolation Motion CCW

    A) G03
    B) G02
    C) G00
    D) G56
    A) G03
    (this multiple choice question has been scrambled)
  5. Dwell

    A) G10
    B) G04
    C) G05
    D) G09
    B) G04
    (this multiple choice question has been scrambled)
  6. Exact Stop (Non-Modal)

    A) G10
    B) G34
    C) G09
    D) G04
    C) G09
    (this multiple choice question has been scrambled)
  7. Programmable Offset Setting

    A) G09
    B) G10
    C) G54
    D) G14
    B) G10
    (this multiple choice question has been scrambled)
  8. Clockwise Circular Pocket Milling

    A) G54
    B) G37
    C) G12
    D) G10
    C) G12
    (this multiple choice question has been scrambled)
  9. Counter-Clockwise Circular Pocket Milling

    A) G12
    B) G13
    C) G21
    D) G10
    B) G13
    (this multiple choice question has been scrambled)
  10. Circular Motion XY Plane

    A) G17
    B) G24
    C) G19
    D) G09
    A) G17
    (this multiple choice question has been scrambled)
  11. Circular Motion ZX Plane

    A) G17
    B) G21
    C) G18
    D) G05
    C) G18
    (this multiple choice question has been scrambled)
  12. Circular Motion YZ Plane

    A) G20
    B) G19
    C) G17
    D) G04
    B) G19
    (this multiple choice question has been scrambled)
  13. Verify Inch Coordinate Positioning

    A) G20
    B) G54
    C) G17
    D) G61
    A) G20
    (this multiple choice question has been scrambled)
  14. Verify Metric Coordinate Positioning

    A) G44
    B) G03
    C) G21
    D) G62
    C) G21
    (this multiple choice question has been scrambled)
  15. Machine Zero Return through Reference Point

    A) G32
    B) G19
    C) G27
    D) G28
    D) G28
    (this multiple choice question has been scrambled)
  16. Move to Location through G28 Reference Point

    A) G17
    B) G57
    C) G27
    D) G29
    D) G29
    (this multiple choice question has been scrambled)
  17. Feed Until Skip Function

    A) G11
    B) G41
    C) G31
    D) G21
    C) G31
    (this multiple choice question has been scrambled)
  18. Automatic Tool Diameter Measurement

    A) G12
    B) G50
    C) G47
    D) G35
    D) G35
    (this multiple choice question has been scrambled)
  19. Automatic Work Offset Measurement

    A) G00
    B) G39
    C) G36
    D) G54
    C) G36
    (this multiple choice question has been scrambled)
  20. Automatic Tool Length Measurement

    A) G44
    B) G37
    C) G06
    D) G35
    B) G37
    (this multiple choice question has been scrambled)
  21. Cutter Comp Cancel

    A) G33
    B) G57
    C) G12
    D) G40
    D) G40
    (this multiple choice question has been scrambled)
  22. 2D Cutter Compensation, Left

    A) G41
    B) G27
    C) G15
    D) G56
    A) G41
    (this multiple choice question has been scrambled)
  23. 2D Cutter Compensation, Right

    A) G04
    B) G23
    C) G42
    D) G40
    C) G42
    (this multiple choice question has been scrambled)
  24. Tool Length Compensation +

    A) G55
    B) G53
    C) G43
    D) G12
    C) G43
    (this multiple choice question has been scrambled)
  25. Tool Length Compensation -

    A) G26
    B) G19
    C) G44
    D) G33
    C) G44
    (this multiple choice question has been scrambled)
  26. Text Engraving

    A) G46
    B) G57
    C) G67
    D) G47
    D) G47
    (this multiple choice question has been scrambled)
  27. Tool Length Compensation Cancel

    A) G49
    B) G93
    C) G27
    D) G59
    A) G49
    (this multiple choice question has been scrambled)
  28. Scaling Cancel

    A) G10
    B) G37
    C) G50
    D) G72
    C) G50
    (this multiple choice question has been scrambled)
  29. Scaling

    A) G50
    B) G64
    C) G51
    D) G44
    C) G51
    (this multiple choice question has been scrambled)
  30. Work Offset Positioning Coordinate

    A) G52
    B) G47
    C) G69
    D) G15
    A) G52
    (this multiple choice question has been scrambled)
  31. Machine Positioning Coordinate (Non_modal)

    A) G57
    B) G29
    C) G72
    D) G53
    D) G53
    (this multiple choice question has been scrambled)
  32. Work Offset Positioning Coordinate

    a) G54
    c) G72
    d) G15
    e) G01
    a) G54
  33. Work Offset Positioning Coordinate

    A) G98
    B) G44
    C) G19
    D) G55
    D) G55
    (this multiple choice question has been scrambled)
  34. Work Offset Positioning Coordinate

    A) G19
    B) G42
    C) G56
    D) G73
    C) G56
    (this multiple choice question has been scrambled)
  35. Work Offset Positioning Coordinate

    A) G09
    B) G50
    C) G57
    D) G63
    C) G57
    (this multiple choice question has been scrambled)
  36. Work Offset Positioning Coordinate

    A) G80
    B) G58
    C) G89
    D) G15
    B) G58
    (this multiple choice question has been scrambled)
  37. Work Offset Positioning Coordinate

    A) G59
    B) G30
    C) G99
    D) G17
    A) G59
    (this multiple choice question has been scrambled)
  38. Uni-Directional Positioning

    A) G50
    B) G20
    C) G70
    D) G60
    D) G60
    (this multiple choice question has been scrambled)
  39. Exact Stop (Modal)

    A) G25
    B) G71
    C) G58
    D) G61
    D) G61
    (this multiple choice question has been scrambled)
  40. Exact Stop Cancel

    A) G13
    B) G64
    C) G09
    D) G62
    B) G64
    (this multiple choice question has been scrambled)
  41. Macro Subroutine Call

    a) G65
    b) G43
    d) G91
    e) G72
    a) G65
  42. Rotation

    A) G68
    B) G02
    C) G14
    D) G53
    A) G68
    (this multiple choice question has been scrambled)
  43. Rotation Cancel

    A) G77
    B) G55
    C) G69
    D) G31
    C) G69
    (this multiple choice question has been scrambled)
  44. Bolt Hole Circle with a Canned Cycle

    A) G18
    B) G88
    C) G70
    D) G97
    C) G70
    (this multiple choice question has been scrambled)
  45. Bolt Hole Arc with a Canned Cycle

    A) G71
    B) G38
    C) G41
    D) G93
    A) G71
    (this multiple choice question has been scrambled)
  46. Bolt Holes along an Angle with a Canned Cycle

    A) G19
    B) G83
    C) G34
    D) G72
    D) G72
    (this multiple choice question has been scrambled)
  47. HS Peck Drilling Canned Cycle

    A) G80
    B) G71
    C) G73
    D) G78
    C) G73
    (this multiple choice question has been scrambled)
  48. Reverse Tapping Canned Cycle

    A) G74
    B) G47
    C) G83
    D) G90
    A) G74
    (this multiple choice question has been scrambled)
  49. Fine Boring Canned Cycle

    A) G27
    B) G12
    C) G89
    D) G76
    D) G76
    (this multiple choice question has been scrambled)
  50. Back Bore Canned Cycle

    A) G77
    B) G62
    C) G41
    D) G96
    A) G77
    (this multiple choice question has been scrambled)
  51. Cancel Canned Cycle

    A) G80
    B) G78
    C) G48
    D) G37
    A) G80
    (this multiple choice question has been scrambled)

Card Set Information

Author:
JTManchild
ID:
314731
Filename:
G Codes
Updated:
2016-01-26 03:44:50
Tags:
Codes
Folders:

Description:
G Code Quiz
Show Answers:

Home > Flashcards > Print Preview