M Codes

Home > Preview

The flashcards below were created by user JTManchild on FreezingBlue Flashcards.


  1. Program Stop

    A) M00
    B) M91
    C) M21
    D) M53
    A) M00
    (this multiple choice question has been scrambled)
  2. Optional Program Stop

    A) M01
    B) M00
    C) M10
    D) M22
    A) M01
    (this multiple choice question has been scrambled)
  3. Program End

    A) M15
    B) M77
    C) M02
    D) M21
    C) M02
    (this multiple choice question has been scrambled)
  4. Spindle On Clockwise

    A) M03
    B) M10
    C) M42
    D) M11
    A) M03
    (this multiple choice question has been scrambled)
  5. Spindle On Counter-Clockwise

    A) M00
    B) M04
    C) M14
    D) M29
    B) M04
    (this multiple choice question has been scrambled)
  6. Spindle Stop

    A) M15
    B) M65
    C) M05
    D) M40
    C) M05
    (this multiple choice question has been scrambled)
  7. Tool Change

    A) M72
    B) M06
    C) M01
    D) M27
    B) M06
    (this multiple choice question has been scrambled)
  8. Shower Coolant

    A) M01
    B) M91
    C) M07
    D) M57
    C) M07
    (this multiple choice question has been scrambled)
  9. Coolant On

    A) M18
    B) M08
    C) M01
    D) M49
    B) M08
    (this multiple choice question has been scrambled)
  10. Coolant Off

    A) M09
    B) M08
    C) M10
    D) M32
    A) M09
    (this multiple choice question has been scrambled)
  11. Fourth Axis Brake On

    A) M101
    B) M37
    C) M10
    D) M99
    C) M10
    (this multiple choice question has been scrambled)
  12. Fourth Axis Brake Release

    A) M21
    B) M11
    C) M06
    D) M37
    B) M11
    (this multiple choice question has been scrambled)
  13. Fifth Axis Brake On

    A) M12
    B) M77
    C) M47
    D) M21
    A) M12
    (this multiple choice question has been scrambled)
  14. Fifth Axis Brake Release

    A) M33
    B) M11
    C) M13
    D) M31
    C) M13
    (this multiple choice question has been scrambled)
  15. Tool Change

    A) M11
    B) M61
    C) M66
    D) M16
    D) M16
    (this multiple choice question has been scrambled)
  16. Unclamp APC Pallet and Open APC Door

    A) M22
    B) M71
    C) M78
    D) M17
    D) M17
    (this multiple choice question has been scrambled)
  17. Clamp APC Pallet and Close APC Door

    A) M90
    B) M25
    C) M18
    D) M81
    C) M18
    (this multiple choice question has been scrambled)
  18. Orient Spindle

    A) M27
    B) M25
    C) M99
    D) M19
    D) M19
    (this multiple choice question has been scrambled)
  19. Optional User M Code Interface with M-Fin signal

    A) M20 - M27
    B) M21 - M27
    C) M21 - M28
    D) M31 - M38
    C) M21 - M28
    (this multiple choice question has been scrambled)
  20. Program End and Reset

    A) M09
    B) M30
    C) M81
    D) M03
    B) M30
    (this multiple choice question has been scrambled)
  21. Chip Auger Forward

    A) M09
    B) M13
    C) M15
    D) M31
    D) M31
    (this multiple choice question has been scrambled)
  22. Chip Auger Stop

    A) M33
    B) M19
    C) M103
    D) M09
    A) M33
    (this multiple choice question has been scrambled)
  23. Coolant Spigot Position Down

    A) M40
    B) M25
    C) M34
    D) M12
    C) M34
    (this multiple choice question has been scrambled)
  24. Coolant Spigot Position Up

    A) M75
    B) M15
    C) M35
    D) M26
    C) M35
    (this multiple choice question has been scrambled)
  25. Pallet Part Ready

    A) M18
    B) M88
    C) M36
    D) M38
    C) M36
    (this multiple choice question has been scrambled)
  26. Rotate Tool Carousel

    A) M21
    B) M93
    C) M99
    D) M39
    D) M39
    (this multiple choice question has been scrambled)
  27. Spindle Low Gear Override

    A) M41
    B) M04
    C) M104
    D) M16
    A) M41
    (this multiple choice question has been scrambled)
  28. Spindle High Gear Override

    A) M24
    B) M46
    C) M42
    D) M56
    C) M42
    (this multiple choice question has been scrambled)
  29. Execute Pallet Change

    A) M05
    B) M25
    C) M50
    D) M55
    C) M50
    (this multiple choice question has been scrambled)
  30. Optional User M-Code Set

    A) M51 - M58
    B) M50 - M58
    C) M58 - M65
    D) M41 - M47
    A) M51 - M58
    (this multiple choice question has been scrambled)
  31. Output Relay Set

    A) M95
    B) M81
    C) M91
    D) M59
    D) M59
    (this multiple choice question has been scrambled)
  32. Optional User M-Code Clear

    A) M21 - M28
    B) M71 - M78
    C) M51 - M58
    D) M61 - M68
    D) M61 - M68
    (this multiple choice question has been scrambled)
  33. Output Relay Clear

    A) M96
    B) M64
    C) M69
    D) M54
    C) M69
    (this multiple choice question has been scrambled)
  34. Set G35 or G136 Reference Point

    A) M55
    B) M57
    C) M75
    D) M77
    C) M75
    (this multiple choice question has been scrambled)
  35. Control Display Inactive

    a) M76
    b) M67
    d) M66
    e) M36
    a) M76
  36. Control Display Active

    A) M74
    B) M77
    C) M49
    D) M94
    B) M77
    (this multiple choice question has been scrambled)
  37. Alarm if Skip Signal Found

    A) M78
    B) M87
    C) M64
    D) M49
    A) M78
    (this multiple choice question has been scrambled)
  38. Alarm if Skip Signal Not Found

    A) M99
    B) M97
    C) M81
    D) M79
    D) M79
    (this multiple choice question has been scrambled)
  39. Automatic Door Open

    A) M88
    B) M64
    C) M08
    D) M80
    D) M80
    (this multiple choice question has been scrambled)
  40. Automatic Door Close

    A) M11
    B) M81
    C) M64
    D) M18
    B) M81
    (this multiple choice question has been scrambled)
  41. Tool Unclamp

    A) M82
    B) M22
    C) M28
    D) M88
    A) M82
    (this multiple choice question has been scrambled)
  42. Auto Air Jet On

    A) M38
    B) M64
    C) M83
    D) M09
    C) M83
    (this multiple choice question has been scrambled)
  43. Auto Air Jet Off

    A) M44
    B) M48
    C) M84
    D) M16
    C) M84
    (this multiple choice question has been scrambled)
  44. Tool Clamp

    a) M86
    b) M68
    d) M47
    e) M64
    a) M86
  45. Coolant through Spindle On

    A) M88
    B) M18
    C) M86
    D) M16
    A) M88
    (this multiple choice question has been scrambled)
  46. Coolant through Spindle Off

    A) M64
    B) M98
    C) M81
    D) M89
    D) M89
    (this multiple choice question has been scrambled)
  47. Axis Pos Capture Start

    A) M81
    B) M39
    C) M93
    D) M09
    C) M93
    (this multiple choice question has been scrambled)
  48. Axis Pos Capture Stop

    A) M94
    B) M18
    C) M49
    D) M16
    A) M94
    (this multiple choice question has been scrambled)
  49. Sleep Mode

    A) M25
    B) M59
    C) M81
    D) M95
    D) M95
    (this multiple choice question has been scrambled)
  50. Jump if No Signal

    A) M96
    B) M81
    C) M54
    D) M69
    A) M96
    (this multiple choice question has been scrambled)
  51. Local Sub-Program Call

    A) M97
    B) M79
    C) M99
    D) M77
    A) M97
    (this multiple choice question has been scrambled)
  52. Sup-Program Call

    A) M87
    B) M98
    C) M72
    D) M92
    B) M98
    (this multiple choice question has been scrambled)
  53. Sub-Program Return or Loop

    A) M81
    B) M19
    C) M29
    D) M99
    D) M99
    (this multiple choice question has been scrambled)
  54. Interactive User Input

    A) M109
    B) M82
    C) M99
    D) M90
    A) M109
    (this multiple choice question has been scrambled)

Card Set Information

Author:
JTManchild
ID:
314768
Filename:
M Codes
Updated:
2016-01-26 18:37:19
Tags:

Folders:

Description:
M Codes
Show Answers:

Home > Flashcards > Print Preview