203NW Ch2

The flashcards below were created by user slc53 on FreezingBlue Flashcards.

  1. Acceptance stage
    The final stage of the standardization process in which a solution is adopted as a standard.
  2. Ack
    Acknowledgement message sent by the receiving computer in a connection-oriented transmission.
  3. ANSI
    American National Standards Institute. The coordinating organization for the U.S. national system of technical and non-technical standards. ANSI accepts standards developed by other organizations and publishes them as American standards and coordinates development of voluntary national standards that comply with international recommendations.
  4. Application layer (DoD and Internet)
    Combines the OSI model Application, Presentation, and Session layers.
  5. Application layer (OSI)
    The network layer that houses the applications that allow users to access the network.
  6. Connectionless transmissions
    Transmissions in which no response from the receiver is required.
  7. Connection-oriented transmission
    Transmissions that require an acknowledgement of receipt from the receiving computer.
  8. Data compression
    Resizing the data to speed transmission.
  9. Data encryption
    Security measure to prevent data from being read by unintended recipients.
  10. Data Link layer (Internet Model)
    Internet model layer equivalent to the OSI model Data Link layer. Also known as the Network Interface layer.
  11. Data Link layer (OSI model)
    The layer of the OSI model responsible for transmitting data over the network cable. Also called the Network Interface layer.
  12. Data presentation
    Formatting data so that it is readable by the recipient.
  13. Data separation
    The process of “bookmarking” packets to allow for sessions to be recovered.
  14. Reliable transport method
    A transmission that ensures the error-free receipt of packets.
  15. RFC
    Request for Comment. The documents in which formal standards are published.
  16. Routing
    The process of determining the path required to deliver packets to their destination.
  17. Routing protocol
    The protocol used by routers to define how the routing path is chosen.
  18. Routing table
    A table stored in memory on a router that keeps track of known networks and the appropriate port to use to reach each network.
  19. Session accounting
    The process that handles billing for sessions.
  20. Session initiation
    The process that sets up the parameters of the connection between computers.
  21. Session layer (OSI)
    The network layer that controls the communication.
  22. Session termination
    The process that closes down the connection between computers.
  23. SMTP
    Simple Mail Transfer Protocol. A communication protocol used to define how e-mail is sent and received.
  24. Simplex
    Data flows in only one direction.
  25. Source routing
    A routing technique in which the routing information is included in the packet being routed.
  26. Standardization process
    The formal process by which standards are developed.
  27. TCP/IP model
    Transmission Control Protocol/Internet Protocol, the protocol used by the Internet. Also technically known as the Department of Defense (DoD) model.
  28. Trailer
    Information that is added to the end of a data packet.
  29. Transmission circuit
    The physical conduit over which data travels within a network.
  30. TCP
    Transmission Control Protocol. The protocol used to create connection-oriented services in the TCP/IP model.
  31. Transport layer (DoD and Internet)
    The network layer responsible for moving data, ensuring that it is received without errors. DoD and Internet model layer equivalent to the OSI Transport layer.
  32. Transport layer (OSI)
    The network layer responsible for moving data, ensuring that it is received without errors.
  33. UDP
    User Datagram Protocol. The protocol used to create connectionless services in the TCP/IP model.
  34. Vertical relationship
    Communication from one layer to the layer above or below on the same device.
  35. 2.1.1. Compare formal and de facto standards.
    A formal standard is one that has been defined by one of the standards organizations, and they take several years to develop. De facto standards are standards that are supported by several vendors but have no official standing. De facto standards often become formal standards after they have been widely accepted.
  36. 2.1.2. Why are standards important to an industry segment like networking?
    Standards help to ensure compatibility between different vendors’ products, spur competition, and keep prices reasonable.
  37. 2.1.3. List the major standards organizations relating to data communications, networking, and the Internet.
    • American National Standards Institute (ANSI)
    • Institute of Electrical and Electronics Engineers (IEEE)
    • Institution of Electrical Engineers (IEE)
    • International Organization for Standardization (ISO)
    • International Telecommunications Union (ITU)
    • International Telecommunications Union-Telecommunications Group (ITU-T)
    • Internet Engineering Task Force (IETF)
  38. 2.2.1. List and describe the seven OSI model layers.
    • Application: End-user and application access to the network.
    • Presentation: Formats data for presentation to the use or for transmission on the network.
    • Session: Initiates, maintains, and terminates logical sessions, also manages dialog control and data separation.
    • Transport: Deals with end-to-end issues and establishes, maintains, and terminates connections.
    • Network: Manages logical addresses and routing.
    • Data Link: Manages physical transmission circuit, responsible for physical addressing, and translates packets into frames.
    • Physical: Responsible for physical connection and data communication.
  39. 2.2.2. List and describe common IEEE Physical layer standards.
    • Ethernet 802.3, common wired network standard supporting speeds up to 10 Gbps.
    • Token Ring 802.5, standard initially developed by IBM and no longer in common use.
    • WiFi 802.11, wireless standard that includes several detailed standards such as 802.11b and 802.11g.
  40. 2.3.1. Compare the OSI, TCP/IP (or DoD), and Internet models.
    • The Process (DoD) and Application (Internet) layers are equivalent to the OSI Application, Process, and Session layers.
    • The Host-to-Host (DoD) and Transport (Internet) layers are equivalent to the OSI Transport layer.
    • The Internet (DoD) and Network (Internet) layers are equivalent to the OSI Network layer.
    • The Network Interface (DoD) and Data Link (Internet) layers are equivalent to the OSI Data Link layer.
    • The Physical (Internet) layer is equivalent to the OSI Physical layer. The DoD model does not have an equivalent layer.
  41. 2.3.2. How are Internet layers organized into groups?
    When designing a network, layers are often closely coupled and can be thought of in three groups: the Hardware layers (Physical and Data Link), the Internetwork layers (Network and Transport), and the Application layer. These groupings apply to the OSI model and Internet model but apply less to the TCP/IP model since it doesn’t have a Physical layer.
  42. 1. A de facto standard is one that emerges in the marketplace but has no official standing. True or false?
    True
  43. 2. What standards body developed the OSI model?
    (a) ISO
    (b) ITU-T
    (c) IEEE
    (d) ANSI
    a) ISO
  44. 3. Which of the following is used to develop and publish Internet standards?
    (A) DoD
    (B) ITU
    (C) RFC
    (D) IETF
    (C) RFC
    (this multiple choice question has been scrambled)
  45. 4. ANSI is a U.S. standards-making body. True or false?
    False
  46. 5. Which layer of the OSI model is responsible for routing?
    (A) Network layer
    (B) Session layer
    (C) Data Link layer
    (D) Transport layer
    (A) Network layer
    (this multiple choice question has been scrambled)
  47. 6. Which of the following terms is used to describe a connection where both ends are able to communicate simultaneously?
    (A) Full-duplex
    (B) Reliable transport method
    (C) Connection-oriented transmission
    (D) Half-duplex communication
    (A) Full-duplex
    (this multiple choice question has been scrambled)
  48. 7. The connectors that are used to attach a NIC to a network cable are defined at what layer of the OSI model?
    (A) Transport layer
    (B) Data Link layer
    (C) Physical layer
    (D) Network layer
    (C) Physical layer
    (this multiple choice question has been scrambled)
  49. 8. What is a MAC address?
    (A) the address used to determine the route taken through an internetwork
    (B) the globally unique address hard-coded on a network adapter
    (C) a logical address defined at the Internet model Network layer
    (D) a value used for data encryption by the Internet Application layer
    (B) the globally unique address hard-coded on a network adapter
    (this multiple choice question has been scrambled)
  50. 9. The Internet network model consists of how many layers?
    (A) seven
    (B) four
    (C) five
    (D) ten
    (C) five
    (this multiple choice question has been scrambled)
  51. 10. What is the most commonly used network physical standard?
    (A) 802.2
    (B) 802.3
    (C) 802.11
    (D) 802.5
    (B) 802.3
    (this multiple choice question has been scrambled)
  52. 11. Which of the following are associated most closely with the OSI model Application layer?
    (A) Logical addresses
    (B) Email services
    (C) Dialog control
    (D) Connection-oriented transmissions
    (B) Email services
    (this multiple choice question has been scrambled)
  53. 12. Which OSI model layer is NOT represented in the DoD network model?
    (A) Physical
    (B) Transport
    (C) Network
    (D) Presentation
    (A) Physical
    (this multiple choice question has been scrambled)
  54. 13. Which protocol is most closely associated with the Internet model Internet layer?
    (A) HTTP
    (B) UDP
    (C) TCP
    (D) IP
    (D) IP
    (this multiple choice question has been scrambled)
  55. 14. Which Host-to-Host layer protocol provides connection-oriented service?
    (A) UDP
    (B) TCP
    (C) IP
    (D) HTTP
    (B) TCP
    (this multiple choice question has been scrambled)
Author:
slc53
ID:
315271
Card Set:
203NW Ch2
Updated:
2016-02-03 23:57:00
Tags:
203NW Ch2
Folders:

Description:
203NW Ch2
Show Answers: