API 653 Who Dats

Home > Preview

The flashcards below were created by user egf4201 on FreezingBlue Flashcards.


  1. Overall responsibility for compliance with API 653         1.2
    Owner
  2. Evaluate deterioration on existing shell material          4.3.1.2
    Engineer
  3. In a corroded area, find t(thinnest area exclusive of pit)        4.3.2.1.a
    Inspector
  4. In a corroded area, determine the vertical lines (L)                    4.3.2.1.c
    Inspector
  5. Determine MFL Threshold          4.4.5.1 Note 1
    Owner
  6. Perform the Routine In-Service inspection
    • 6.3.1.1
    • Operator
  7. Perform the external inspection
    • 6.3.2.1
    • Inspector
  8. Determine the extent of UT measurements on the shell                   6.3.3.1
    Owner
  9. Review the results of CP surveys        6.3.4.1
    Owner
  10. Assure competency of personnel performing CP surveys              6.3.4.2
    Owner
  11. Perform the Internal inspection      6.4.1.2
    Inspector
  12. Choose the RBI to set Internal interval   6.4.2.2.2
    Owner
  13. Conduct an RBI assessment       6.4.2.2.2
    RBI Team
  14. Review and approve RBI reassessments every 10 years        6.4.2.2.2
    RBI team
  15. Maintain tank records        6.8.1
    Owner
  16. Prepare report after each external & internal inspection         6.9.1
    Inspector
  17. Maintain inspection reports & recommendations for life of tank    6.9.1
    Owner
  18. Review inspection findings and recommendations     6.9.3.2
    Owner
  19. Ensure disposition of all recommended repairs and monitoring        6.9.3.2
    Owner
  20. Evaluate and accept NDE examination results
    • 6.10
    • Inspector
  21. Authorize all repairs     9.1.3
    Inspector OR Engineer
  22. Authorize all alterations      9.1.3
    Engineer
  23. Designate inspection hold points for repairs, alterations, & reconstructions       9.1.3
    Inspector
  24. Provide general authorization for limited routine repairs       9.1.3
    Inspector
  25. Approve all proposed methods of design, materials. WPSs. NDE & testing     9.1.4
    Inspector OR Engineer
  26. Approve all repair, alteration and reconstruction work at hold points     9.1.4
    Inspector OR Engineer
  27. Approve all repair, alteration, & reconstruction work at completion of work     9.1.4
    Inspector OR Engineer
  28. Review & approve the use of non-code specified lap patches on bottom    9.10.1.3
    Engineer
  29. Approve lap patch in critical zone if bottom thickness is less than 0.100"    9.10.1.6.b
    Engineer
  30. Run the hot tap machine      9.14.5.4
    Qualified operator
  31. Authorize all reconstruction work      10.1.3
    Inspector OR Engineer
  32. Review the use of Pre-heat of controlled deposition welding in lieu of PWHT   11.3
    Engineer
  33. Concur in writing use PWHT alternative for materials of unknown toughness   11.3
    Engineer AND Owner
  34. Review and approve exempting a hydro after a major repair or alteration    12.3.2.2
    Engineer AND Owner
  35. Authorize FFS evaluation to exempt a hydro after major repair or alteration    12.3.2.7
    Owner
  36. Perform FFS evaluation to exempt a hydro after major repair or alteration      12.3.2.7
    Engineer
  37. Tank w/o nameplate, oversee attachment of new nameplate    13.1.2.2/3
    Inspector
  38. Perform tank settlement survey   B.2.1
    Experienced person
  39. Do rigorous stress analysis for floor settlement exceeding 653 limits    B.3.2/3.2.4
    Engineer
  40. Verify if floor scans are following the examination procedure     G.3.1
    Inspector OR Owner
  41. Perform qualification tests for floor scanning examiners           G.4.6
    Owner OR 3rd Party
  42. Perform similar service assessments    H.1
    Inspector OR Engineering (Knowledgeable One)

Card Set Information

Author:
egf4201
ID:
327161
Filename:
API 653 Who Dats
Updated:
2017-01-04 23:36:30
Tags:
API 653 Who Dats
Folders:

Description:
API 653 Who Dats
Show Answers:

Home > Flashcards > Print Preview