Volume_1 fixed.txt

Card Set Information

Author:
gorham0585
ID:
40282
Filename:
Volume_1 fixed.txt
Updated:
2010-10-06 18:54:40
Tags:
kjdfn
Folders:

Description:
skdjjngbkdjfngb
Show Answers:

Home > Flashcards > Print Preview

The flashcards below were created by user gorham0585 on FreezingBlue Flashcards. What would you like to do?


  1. If you work on an aircraft on the flight line, you are doing which level of maintenance?
    Organizational
  2. The three general functions of dividing the CAMS database are?
    Maintenance, retrieval, and reporting
  3. Which CAMS subsystem provides the capability to establish a computerized file of required maintenance actions?
    Maintenance events
  4. What is the correct method for writing 30 January 1998?
    19980130
  5. A symbol entered on a maintenance form reflects the opinion of the?
    individial making the entry
  6. When a new AFTO Form 781A is inititated, what kind of discrepancies cannot be transferred to the AFTO Form 781K?
    Red X
  7. Which section of the AFTO Form 244 lists discrepancies?
    V(4)
  8. The five authorized inspection concepts used by the Air Force are?
    Periodic, Phase, Isochronal, Prog. Depot Maint., Airline/Manuf. Maint.
  9. Reducing the time an aircraft is out of commission is an objective of which inspection?
    Phase
  10. What is not one of the elements of the maint. training program?
    Cross-Utilization Program
  11. The primary responsibility for formal upgrade training rests with?
    The commander
  12. The main source of material deficiency information is?
    CAMS
  13. A Cat II, DR that has been submitted for a defect in workmanship must be forwarded to the screening point within?
    3 Workdays
  14. The first part of a national stock number indicicates the?
    Supply Classification
  15. The second position of the Expendability/Recoverability/Reparability/Cost Designator Code(ERRC) indicates?
    Repair level
  16. Air Force property responsibility is imposed by law on?
    All military and civilian employees
  17. What types of property responsibility can be charged to DOD personnel?
    Command, Custodial
  18. An airman who signs out the toolbox assumes which type of property responsibility for that?
    Custodial
  19. How can personnel be relieved from property responsibility?
    Turn-In or transfer
  20. Career Development Courses are an example of?
    A specialized publication
  21. The list of applicable publications (LOAPS) lists Technical Orders that apply to?
    A specific aircraft
  22. Which TO explains how to maintain and inspect a particular weapons system?
    Technical Manual
  23. A series of red X's printed around the border of the first page of a TCTO signifies?
    An immediate action TCTO
  24. In the basic TO numbering system, each TO number will have a minimum of?
    Three number groups
  25. The Maintenance Intergrated Data System (MIDAS) pg. number is?
    A six-digit numbering system expressed as three elements of two digits each
  26. The "XD" in fault isolation code 33-10-XD-02 identifies the?
    Specific Fault
  27. While troubleshooting, you are using a wiring diagram to help you locate a malfunctioning component. After determining which component is faulty, you want to determine its part number. To do this, you would check the wiring diagram's?
    Reference designator
  28. Revisions are issued when changes exceed what percentage of the basic TO?
    80
  29. Safety and operational supplements to technical orders should be filed in?
    Reverse numerical sequence in front of the basic TO
  30. To correct errors in a technical order, you should submit an AFTO Form ___?
    22
  31. Which deficiency report is used for a TO deficiency that involves safety or the unit mission?
    Emergency
  32. How far away from parked aircraft should LOX carts be stored?
    75 ft.
  33. You must observe aircraft oxygen gauges at all times during servicing operations to?
    Prevent overfilling
  34. When you are servicing an aircraft with liquid nitrogen, do not wear?
    Shoes which fit loosely around the top
  35. If your skin comes in contact with liquid nitrogen you should?
    Seek medical attention immediately
  36. Which classification identifies a Class/Division 1.4 explosive?
    Low explosive weight items
  37. What must you ensure when you are transporting squibs?
    The squibs are in a protective container
  38. While working on high-voltage equipment, you must have a safety observer. This individual must know how ____?
    To turn off the equipment
  39. How much electrical current does it take to cause muscle paralysis?
    .015 amps
  40. Which area of a LRU is most susceptible to ESD damage?
    Connector pins
  41. Human awareness of static electricity is at approximately?
    3500 Volts
  42. For personnel ESD grounding, you must use a skin contact wrist strap connected to the workbench surface. This strap must have a resistance of at least _____?
    1 Megohm
  43. Which situation illustrates a physical hazard presented by a chemical hazard?
    Second degree skin burn
  44. What is the minimum information required on a hazardous chemical inventory?
    Name of the material
  45. Which element must be included in a workplace written hazard communication program?
    Hazardous material inventory
  46. Which air force regulation/instruction is a source of information for the prevention of accidents?
    AFI 91-202
  47. Who is responsible for seeking out and elmininating accident causes?
    Everyone
  48. What is considered to be a safe distance in front of jet engine intake ducts?
    25 ft.
  49. You are performing a task that requires you to turn OFF the power to an aircraft system. In this situation, which AFTO Form would you attach to the system's circuit breaker?
    1492
  50. What is one of the primary causes for FOD?
    Careless maintenance personnel
  51. Which mishap prevention tag is used to warn personnel against potential hazards?
    Caution
  52. Which form is used to report ground safety accidents involving personnel (not involving aircraft)?
    AF Form 711
  53. High-frequency radiation is not produced by?
    Nuclear weapons
  54. Which type of nuclear radiation is the strongest?
    Gamma
  55. What is the unit of measure for radiation quantity?
    Roentgen
  56. What is the temporary storage location designed to store nuclear materials in transit through a base called?
    Safe Haven

What would you like to do?

Home > Flashcards > Print Preview