Card Set Information
What are the five oxygen storage systems?
What color storage cylinder identifies a low pressure oxy sys? with in what range is this system considered full?
425 +- 25psi
What color storage cylinder identifies a high pressure oxy system? with in what range is this system considered full?
Which is the modified high pressure oxygen system in the T-6? In what range is the cylinder considered full?
Emergency oxygen cylinder
Where is the Emer Oxy bottle located in the T6?
Left side of seat
The EMER OXY SYS can be used up to what altitude?
The EMER OXY sys has a continuous flow delivery method, what does this mean?
It will deliver oxy continuously until the oxy is depleted. it last 8-10min
What is the known name for the pressure regulator?
pressure demand oxygen system
What is the operation and emergency ceiling of the pressure demand system?
What does CRU-60/CRP stand for?
Connector regulator unit (60 is model) connector regulator personal
How man lbs of force are required to disconnect the CRU-60?
while checking the pressure demand system during the RICE check, how many breaths should you take? and why?
three minimum, to monitor the flow indicator for alternate black and white indications.
If the oxy sys fails how much emergency oxy do we have?
How often should all life support equipment including harness be inspected?
Every 30 days
What regulation states that supplemental oxy should be used above cabin altitudes greater than 10K ft?
AFI 11-202 vol 3 general flight rules
What system do we use to check oxy mask yourself?
When checking for a seal in oxy mask what color are you looking for?
Describe the RICE check
Regulator-chk general ext/Int condition
Indicator-chk flow indicator
Emergency-chk connection & pressure @1800psi
What is the name of the parachute on the T-6?
Describe the GQ-5000?
21 ft. inflated diameter, multi-colored nylon aeroconical canopy
Can you cut the lines on the GQ-5000?
What is the steering mechanism that provides directional control of the GQ-5000?
The Le-Moigne slots
Where are the Le-Moigne slots located?
162 degrees apart in gore 6 and 16
How many lbs of pull pressure are required to operate the Le-Moigne slots?
what are the steps for the parachute landing checklist?
Canopy — Check
Visor — UP
Mask — Discard
Seat Kit — As appropriate
LPUs — As appropriate
Steering Toggles — Pull
What can be doneif canopy is torn or lines broken?
GQ-5000 will deflate ___ after a water landing.
Between what altitude will the parachute canopy deploy automatically?
14 - 18K feet MSL
At what altitude will the chute deploy immediatley?
Below 8k feet MSL
If man seat seperation fails or seperation above 15K Ft MSL is desired, the aircrew should do what?
actuate the yellow/black MOR (manual override) Handle
describe the LPU (Life preserver unit).
it is packed into a nomex container and is sea blue in color
What should you never do during a chute landing?
Cross your legs
During a tree landing what should you jettison?
What should you anticipate during a chute landing?
Hitting the ground
When preparing for a chute landing you should accomplish the PLF, describe it.
Knees Slightly Bent
Feet and Knees Together
Toes Pointed Downward
Eyes on Horizon
Hands on Quick Releases
Elbows Against the Body
Land on Balls of the Feet
What system do you use to disconnect the parachute which allows you to jettison the canopy?describe the procedure.
Canopy release. Press release lever slide towards each other. ther lever are known as the frost fittings.
in which type of landings is the seat survival kit jettisoned?
Tree landing and power line landing
In which of the following landings is the Visor down?
What is the most important factor in success or failure of an ejection?
A timely decsion to eject
What is the min recomended altitude for a controlled ejection?uncontrolled ejection? what are the altitudes based on?
2000 ft AGL
6000 ft AGL
A wings level attitude
What color is the ejection seat handle?
The T6 sea is a Martin Baker seat AKA "zero-zero", what does "zero-zero" mean?
safe ejection at zero altitude zero speed
Describe what happenes when the ejection seat is set to SOLO/BOTH.
If set to SOLO crew members eject individually.
if set to BOTH, both crew members eject, there is a 0.37 sec delay after the rear seat ejects before the front seat ejects.