Niamh Cullen tech Y8 tools and equipment

Card Set Information

Author:
Anonymous
ID:
58763
Filename:
Niamh Cullen tech Y8 tools and equipment
Updated:
2011-01-09 09:42:35
Tags:
tech tools equipment
Folders:

Description:
niamh Y8 tech - tools and equipment
Show Answers:

Home > Flashcards > Print Preview

The flashcards below were created by user Anonymous on FreezingBlue Flashcards. What would you like to do?


  1. Workshop dress:
    Name 4 things you should make sure of when dressing for workshop work?
    • 1. Don't let SLEEVES, ties, hair etc hang loose
    • 2. Wear protective GOGGLES
    • 3. Wear protective SHOES
    • 4. Wear protective GLOVES
  2. Workshop dress:
    When working with acids, what should you ensure?
    You're wearing GOGGLES to protect your eyes.
  3. Workshop - preparation:
    Name 4 things you should check before you BEGIN operating a machine?
    • 1. ensure that your work is in a VICE
    • 2. ensure that machine GUARDS are properly in place
    • 3. ensure that cutting tools are SHARP and are set correctly
    • 3. ensure you know where the STOP button is
  4. Workshop - when operating the machine, you should (3):
    • 1. keep your hands away from MOVING PARTS
    • 2. ensure GOGGLES are covering your eyes
    • 3. keep your hands away from the CUTTIN EDGE
  5. Workshop behaviour:
    Name 3 correct behaviours when in a workshop?
    • 1. never RUN
    • 2. get PERMISSION to use a machine
    • 3. if you have any DOUBTS, ask teacher
  6. Workshop - working with resins:
    What should you make sure of before working with resins?
    Ensure that you are wearing GLOVES or BARRIER CREAM.
  7. Tools and Equipment:
    What's this and what is it used for?
    It's a FRET SAW.I

    It's used for cutting out intricate shapes and patterns and has a very thin blade.
  8. Tools and Equipment:
    What is this called and what is it used for?
    A HEGNERSAW or SCROLL SAW.

    It's a motorised version of the Fret Saw. It's used for cutting intricate shapes in wood and can cut wood up to 25mm thick. It is a very dangerous machine to use!
  9. Tools and Equipment:
    What is this called and what is it used for?
    A BANDFACER.

    It's used for sanding (smoothing) wood surfaces.
  10. Tools and Equipment:
    What is this called?
    A VICE, or vice-grip.

    It's used for holding things tightly in place.
  11. Tools and Equipment:
    What is a cramp and what's it used for?
    It's a G shaped device used for tightening two pieces of wood together to make the glue set properly.

What would you like to do?

Home > Flashcards > Print Preview