Predator

Card Set Information

Author:
dspearson
ID:
64020
Filename:
Predator
Updated:
2011-02-03 23:06:47
Tags:
Op Limits
Folders:

Description:
MQ-1 Flash Cards
Show Answers:

Home > Flashcards > Print Preview

The flashcards below were created by user dspearson on FreezingBlue Flashcards. What would you like to do?


  1. Engine Speed, RPM
    normal range 914i
    2500-5750
  2. Exhaust Gas Temperature (EGT)
    normal range
    1000-1700° F
  3. Max difference between cylinders
    350° F
  4. Coolant Temperature

    (normal range)
    140-210° F
  5. Oil Temperature

    (normal range)
    140-260 F
  6. Oil Pressure 914i

    (normal range)
    32-90 psi
  7. Cylinder Head Temperature (CHT)

    (normal range)
    150-230 F
  8. Alternator Temperature 914i

    (normal range)
    300 F or less
  9. Fuel Pressure 914i

    (normal range)
    49-67 psi
  10. Manifold Air Pressure (MAP)

    (normal range)
    7-36 in hg
  11. Turbo Oil Temperature

    (normal range)
    285 F or less
  12. Engine Fan Amps

    (normal range)
    31 Amps or less
  13. Pilot Monitor Failure
    • SO Operator Display - Use (P)
    • Flight Graphics - Select (SO)
    • HUD Altitude Display - As reqd (S0)
    • Rack Switch - perform, if necessary
  14. Pilot Video Source Failure

    - black screen w/ telemetry
    • SO Video - check
    • Flight Graphics - Select (SO)
    • HUD Alt Display - As reqd (SO)
    • if time and conditions permit
    • Pilot HUD Video Source - Change
    • ACFT Video Mux - Change
  15. LOSS OF CONTROL PREVENT
    • Landing Configuration-Command
    • Payload-Position Mode
    • AOA Sensor Failure
    • Airspeed/Pitot Static Failure
    • AP Sensor Failure
    • Airframe Icing
  16. AOA SENSOR FAILURE
    • Stall Protect-Off
    • Cruise Mode-On
    • Autopilot Hold Modes-as reqd
    • Airspeed-Stall speed +10 min
    • Controllability Check
    • Land as soon as practical
  17. Airspeed or Pitot/Static Failure
    • Preprogram-Off
    • Airspeed Hold-Off
    • Pitot Heat-On
    • Airspeed Source
    • Secondary Altitude
  18. AUTOPILOT SENSOR FAILURE
    AP SENSOR-Switch manually
  19. FLIGHT CONTROL SERVO OVERHEAT
    • Autopilot Hold Modes - As req'd
    • Servo Amp Draw - Monitor
    • Controllability Check
  20. WARNING MESSAGE

    Aileron servo-Amps high
    Ailerson servo current is above 12 amps
  21. WARNING MESSAGE

    Aileron servo-temp high
    • 130 C - yellow
    • 165 C - red
  22. WARNING MESSAGE

    Alternator 2 - temp high
    • Alt 2 temp is above 120 C - yellow
    • Alt 2 temp is above 130 C - red
  23. WARNING MESSAGE

    AOA - stall
    • AOA is above 7 or below -7 - yellow
    • AOA is above 9 or below -9 - red
  24. WARNING MESSAGE

    AV 12V powersupply-temp high
    • Volt converter temp in PCM >65C-Yellow
    • Volt converter temp in PCM >70C-Red
  25. WARNING MESSAGES

    Battery - leaking current
    • Net battery current is > 7 amps
    • battery is online
  26. WARNING MESSAGE

    Battery - net amps high
    • Battery net current is > 50 amps - yellow
    • Battery net current is > 60 amps - red
  27. CCSM
    Control Console Serial Module
  28. WARNING MESSAGE

    Engine computer - lost Rx or Tx
    PCM detects SCM malfunction
  29. WARNING MESSAGE

    Fuel-temp high
    • Fuel Temp is above 140F - yellow
    • Fuel Temp is above 150F - red
  30. WARNING MESSAGE

    Fuel-temp low
    • Fuel temperature is below -55F - yellow
    • Fuel temperatuere is below -60F - red
  31. WARNING MESSAGE

    Fuel level Aft-qty low
    • Fuel level aft is below 20lbs - yellow
    • Fuel level aft is below 10lbs - red
  32. WARNING MESSAGE

    Fuel level Fwd - quantity low
    • Fuel level Fwd qty is below 30lbs-yellow
    • Fuel level Fwd qty is below 15lbs-red
  33. WARNING MESSAGE

    Fuel pump - amps high
    • Fuel pump above 4 amps-yellow
    • Fuel pump above 5 amps-red
  34. WARNING MESSAGE

    Fuel pump - amps low
    Fuel pump below 1 ampere
  35. WARNING MESSAGE

    Net System amps high
    Net system current is above 203 amps
  36. WARNING MESSAGE

    PPO 1 (or 2) - offline
    • PSO workstation 2 detects
    • PSO workstation 1 is offline

    (or vice versa)
  37. WARNING MESSAGE

    Prop servo - amps high
    • Prop servo current is > 9 amps-yellow
    • Prop servo current is > 10amps-red
  38. WARNING MESSAGE

    Prop servo - temp high
    • Prop servo temp > 135 C - yellow
    • Prop servo temp > 165 C - red

What would you like to do?

Home > Flashcards > Print Preview