Theory II

Card Set Information

Author:
sthomp88
ID:
71320
Filename:
Theory II
Updated:
2011-03-07 15:47:13
Tags:
chapter thirty six key words
Folders:

Description:
week eight
Show Answers:

Home > Flashcards > Print Preview

The flashcards below were created by user sthomp88 on FreezingBlue Flashcards. What would you like to do?


  1. relationship between the working end of an instrument and the tooth surface being treated
    adaptation
  2. the angle formed by the working end of an instrument with the surface to which the instrument is applied for treatment
    angulation
  3. working end of an intsrument with special design for a particular clinical treatment
    blade
  4. a curved, rounded dental instrument utilized for scaling, root planing, and gingival curettage
    curet
  5. a specialized instrument designed with specific angles in the shank for adaptation to a certain group of tooth surfaces
    area-specific curet
  6. a curet designed for used on any tooth surface where the adaptation, angulation, and other principles of instrument used can be correctly and effectively accomplished
    universal curet
  7. the hand generally used for performing fine tasks such as writing and holding instruments for scaling
    dominant hand
  8. for an intraoral rest, the place on a tooth or teeth where the third or ring finger of the hand holding the instrument is placed to provide stabiliation and control during activation of the instrument
    finger rest
  9. the support upon which a lever rests while force intended to produce motion is exerted
    fulcrum
  10. use of a dental mouth mirror to view the area of instrumentation. It is provided by the mirror.
    indirect vision
  11. section of the tooth where treatment is indicated and instrumentation is performed
    instrumentation zone
  12. the minimal pressure that is required of an instrument againset the tooth or soft tissue to accomplish the objective of the designated treatment
    lateral pressure
  13. the blade of an area-specific gracey curet in which the lower shank is at a 70* angle to the face of the blade; contrasts with a universal curet blade, which is at a 90* angle with the lower shank
    offset blade
  14. instrument desigend for initial removal of calculus and biofilm
    scaler
  15. instrumentation of a tooth surface to remove calculus and biofilm
    scaling
  16. the part of the instrument between the handle and the working end
    shank
  17. the part of the shank next to the blade
    lower or terminal shank
  18. a single unbroken movement made by an instrument against a tooth surface during an examination or treatment procedure to accomplish a particular objective; the motion made for activation of an instrument
    stroke
  19. fine-grained sharpening stone quarried from natural mineral deposits
    arkansas stone
  20. to smooth and polish; an effect that can result when a dull scaler or curet is passed over tenacious calculus in an attempt to remove the deposit
    burnish
  21. the fine line formed where the face and lateral surfaces of a scaler or curet meet when the instrument is sharp; when the instrument is dull, the line has thickness and may even reflect light
    cutting edge
  22. a sharpening stone; sharpening
    hone/honing
  23. a sharpening stone mounted on a metal mandrel for use in a dental handpiece
    rotary stone
  24. when a scaler or curet is sharp, the cutting edge is a fine line that does not reflect light
    sharpness
  25. plastic 1/4-inch rod, 3 inches long, used to test the sharpness of a scaler or a curet
    testing stick

What would you like to do?

Home > Flashcards > Print Preview