Stall Set Up

Home > Preview

The flashcards below were created by user nolefan on FreezingBlue Flashcards.


  1. Describe the steps for setting up the stall series.
    STALL Setup: 5000 feet and/GW of 195.0 Kg.

    • DESCENT/APPROACH checklist.
    • -Brief recovery speeds
    • -Bank limit to 20°

    Autothrottle off/Autopilot off

    PF calls “AFS OVRD OFF switches off.
  2. Clean Stall Configuration and Recovery
    • Power...Idle
    • Flaps.....Zero
    • Bank.....0 or 20 degrees

    At SHAKER initiate recovery

    • PF "Max Thrust, Slats Extend"
    • "Heading Hold, set speed 250kts"

    @Vsr

    "Slats Retract"
  3. Departure/Approach Stall
    • PF "Slats Extend, Set Speed_____kts
    • pm "Speed ____kts"

    • PF "Flaps 15, Set Speed____kts
    • pm "Speed ____kts"

    pm preselects a heading to begin 180 turn

    • PF "Set Thrust 50% N1"
    • pm "Thrust Set"

    PF continues in 20 degree bank maintaining alt

    RECOVERY

    PF "Max Thrust, heading hold, heading hold"

    PF recovers to Flaps 15 speed ____kts

    if requested PF cleans up to 250kts
  4. Landing Stall
    • PF calls "Slats extend, Set Speed____kts"
    • pm says "Speed ____kts"

    • PF "Flaps 15, Set Speed____kts"
    • pm "Speed ____kts"

    • PF "Flaps 28, Set Speed____kts"
    • pm "Speed ____kts"

    • PF "Gear Down, Flaps 35, Set Speed Vapp, Set Thrust 50% N1"
    • pm "Thrust Set"

    RECOVERY

    PF "FIREWALL THRUST/HEADING HOLD"

    speed above AMBER FOOT

    • PF "Flaps 28"
    • pm "positive rate"
    • PF "Positive Rate Gear Up, Map, Nav, PROF" or "Map, Heading, PROF (Used missed approach procedures)

    • PF "Select Speed 250kts" or "FMS Speed"
    • pm Sets Speed 250 (pull) or FMS speed

Card Set Information

Author:
nolefan
ID:
82702
Filename:
Stall Set Up
Updated:
2011-04-29 21:57:05
Tags:
Stall Set Up
Folders:

Description:
Stall Set Up
Show Answers:

Home > Flashcards > Print Preview