iatii-d

Card Set Information

Author:
iamaphoenix
ID:
85081
Filename:
iatii-d
Updated:
2011-05-10 16:50:19
Tags:
server
Folders:

Description:
series d
Show Answers:

Home > Flashcards > Print Preview

The flashcards below were created by user iamaphoenix on FreezingBlue Flashcards. What would you like to do?


  1. In a Windows Server 2003 environment using PKI, a user encrypts several documents on a shared file server. That user account is then accidentally deleted. Which of the following must be configured in order to decrypt those files?
    A. Key recovery administrator
    B. Trusted root certificate store
    C. Root certificate store
    D. Key recovery agent
    D. Key recovery agent
    (this multiple choice question has been scrambled)
  2. At a minimum how many NICs must a machine have to host virtual machines?
    A. One NIC will support all virtual machines
    B. One for each virtual machine and one for management
    C. Three for each virtual machine
    D. Two for each virtual machine and one for management
    A. One NIC will support all virtual machines
    (this multiple choice question has been scrambled)
  3. After performing a copy backup of a file server, the archive bit on the backed up files will be which of the following?
    A. Copied
    B. Set
    C. Deleted
    D. Unchanged
    D. Unchanged
    (this multiple choice question has been scrambled)
  4. Which of the following Windows Server 2003 technologies can help with making backups of open files?
    A. Differential backup
    B. Snapshot
    C. VSS
    D. Incremental backup
    C. VSS
    (this multiple choice question has been scrambled)
  5. A Windows 2003 server has the operating system installed on a software RAID mirror. After a failure of one disk in the array the server will no longer boot up. The other drive is still functioning. Which of the following should be done to correct the issue?
    A. Recreate the array.
    B. Edit the boot.ini file.
    C. Change to a hardware RAID solution.
    D. Edit the active drive in the array.
    B. Edit the boot.ini file.
    (this multiple choice question has been scrambled)
  6. A server has been intermittently shutting off. The power going to the server was tested and is giving the appropriate voltages. Which of the following tools would be used to test the power supply?
    A. OTDR
    B. Multimeter
    C. POST diagnostic card
    D. TDR
    B. Multimeter
    (this multiple choice question has been scrambled)
  7. Which of the following provides the MOST redundancy for a corporate server network?
    A. Hot site
    B. Server-to-server replication
    C. Server clustering
    D. Disk-to-disk replication
    A. Hot site
    (this multiple choice question has been scrambled)
  8. Which of the following is a distinguishing factor between data archiving and data backups?
    A. Data archives are kept for indefinite periods of time so there is a record while data backups are kept for disaster recovery purposes.
    B. Data archives are kept off-site for data warehousing purposes while data backups are kept locally for immediate server recovery purposes.
    C. Data archives are kept for disaster recovery purposes while data backups are kept for indefinite periods of time so that there is an information record.
    D. Data archives are kept for documentation purposes to easily recover data while data backups are kept for immediate server recovery.
    A. Data archives are kept for indefinite periods of time so there is a record while data backups are kept for disaster recovery purposes.
    (this multiple choice question has been scrambled)
  9. Which of the following is the MOST important step in preparing for disaster recovery?
    A. Identify key disaster recovery personnel
    B. Test the disaster recovery plan process
    C. Assist management with IT backup policy decisions
    D. Ensure that all backup data is kept off-site
    B. Test the disaster recovery plan process
    (this multiple choice question has been scrambled)
  10. Which of the following is an SLA?
    A. A document stating the impact analysis of a nonfunctional server.
    B. A contract that details the correct equipment disposal laws.
    C. A contract that details the device replacement time frames.
    D. A statement of compliance with local laws and regulations.
    C. A contract that details the device replacement time frames.
    (this multiple choice question has been scrambled)
  11. Which of the following BEST explains the purpose of an HCL?
    A. It verifies that hardware is fit for certain overclocking performance metrics.
    B. It sets the bare minimum hardware requirements for specified software.
    C. It lets the administrator know which hardware will work with a particular OS.
    D. It allows the administrator to verify software compatibility amongst various vendors.
    C. It lets the administrator know which hardware will work with a particular OS.
    (this multiple choice question has been scrambled)
  12. Which of the following is the MOST important physical consideration when deploying a new server?
    A. Cooling, rack space, and power requirements
    B. Humidity monitors, Biometrics, and fire suppression
    C. Service level agreements, uninterruptible power supply (UPS) deployment, and CCTV
    D. Biometrics, fire suppression, and power requirements
    A. Cooling, rack space, and power requirements
    (this multiple choice question has been scrambled)
  13. An IT manager is concerned about server administrators having to be cross-trained to work on every server. Which of the following is the BEST way to correct this problem?
    A. Ensure that server baselines are documented for each server.
    B. Ensure that each server is accessible via a KVM over IP.
    C. Ensure that all server documentation is completed and up to date.
    D. Ensure that each server is processed through the change control board.
    C. Ensure that all server documentation is completed and up to date.
    (this multiple choice question has been scrambled)
  14. Which of the following is typically collected during the server baselining process?
    A. Microsoft Baseline Security Analyzer output
    B. Server performance statistics
    C. The vendor documentation and knowledgebase
    D. Compliance of local laws
    B. Server performance statistics
    (this multiple choice question has been scrambled)
  15. Which of the following is the BEST reason to label servers within the server room?
    A. To ensure the servers can be identified quickly and easily
    B. To ensure administrators avoid duplicate server names
    C. To ensure server power requirements are met
    D. To ensure server documentation is kept up to date
    A. To ensure the servers can be identified quickly and easily
    (this multiple choice question has been scrambled)
  16. Which of the following is the BEST place to find information about particular server software?
    A. HCL
    B. Online support channels
    C. Driver release notes
    D. Vendor website
    D. Vendor website
    (this multiple choice question has been scrambled)
  17. Which of the following will corrupt the BIOS?
    A. Installing the OS before applying the BIOS upgrade
    B. Imaging the system after performing a BIOS upgrade
    C. Applying the BIOS settings in the incorrect order
    D. Power being lost during the upgrade process
    D. Power being lost during the upgrade process
    (this multiple choice question has been scrambled)
  18. An administrator is attempting to start a server from a bootable Linux disk but instead the server boots into Windows. Which of the following is the MOST likely reason for this?
    A. The boot order is set incorrectly in the BIOS.
    B. The Linux disk is not supported in a Windows environment.
    C. The OS settings are not set properly for Linux support.
    D. The system needs to boot to Windows first, prior to booting into Linux.
    A. The boot order is set incorrectly in the BIOS.
    (this multiple choice question has been scrambled)
  19. Which of the following servers would dynamically allocate IP addresses to workstations?
    A. DHCP
    B. SNMP
    C. NTP
    D. DNS
    A. DHCP
    (this multiple choice question has been scrambled)
  20. Which of the following BEST describes the function of a redundant power supply?
    A. Eliminates a single point of failure
    B. Provides additional diagnostic LEDs
    C. Reduces total cost of ownership
    D. Reduces power consumption
    A. Eliminates a single point of failure
    (this multiple choice question has been scrambled)
  21. Which of the following provides the MOST storage capacity without fault tolerance?
    A. SATA
    B. SAS
    C. JBOD
    D. RAID 1
    C. JBOD
    (this multiple choice question has been scrambled)
  22. Which of the following would an administrator follow when disposing of equipment for a financial institution?
    A. Local laws and regulations
    B. Server OEM regulations
    C. Manufacturer's regulations
    D. Escalation procedure regulations
    A. Local laws and regulations
    (this multiple choice question has been scrambled)
  23. A server configured with RAID 5 has recently suffered from two simultaneous disk failures. Which of the following would be required to bring the server back to operational status? (Select TWO).
    A. Break mirror array
    B. Replace cache battery
    C. Replace hot standby
    D. Restore from back up
    E. Replace defective hard drives
    • D. Restore from back up
    • E. Replace defective hard drives
  24. Which of the following RAID levels provides high performance and potentially allows for the system to continue running with multiple disk failures?
    A. RAID 1
    B. RAID 10
    C. RAID 0
    D. RAID 5
    B. RAID 10
    (this multiple choice question has been scrambled)
  25. Which of the following ports supports hot plug devices? (Select TWO).
    A. USB
    B. AGP
    C. PCI
    D. IDE
    E. PS2
    • A. USB
    • C. PCI
  26. Which of the following is the minimum number of drives required for a RAID 10 array?
    A. 4
    B. 10
    C. 3
    D. 5
    A. 4
    (this multiple choice question has been scrambled)
  27. An environment has a DC server and an Exchange server. The administrator needs to install a patch and restart both servers while minimizing downtime. Which of the following is the BEST way to restart the servers?
    A. The order in which the servers are restarted does not matter.
    B. DC server first, then the Exchange server second.
    C. Exchange server first, then the DC server second.
    D. Restart both servers at the same time so the servers are down at the same time.
    B. DC server first, then the Exchange server second.
    (this multiple choice question has been scrambled)
  28. Before installing a firmware update on a RAID controller which of the following should be done?
    A. Rebuild any arrays on the controller.
    B. Install a redundant BIOS on the controller.
    C. Check for corresponding OS updates.
    D. Check for corresponding driver updates.
    D. Check for corresponding driver updates.
    (this multiple choice question has been scrambled)
  29. An administrator is troubleshooting a problem on an application server, but has not determined the cause of the problem and is not able to replicate the problem. Which of the following should the administrator do prior to escalating the issue?
    A. Gather information from users.
    B. Reboot the server.
    C. Perform a root cause analysis.
    D. Apply the latest service packs to the operating system.
    A. Gather information from users.
    (this multiple choice question has been scrambled)
  30. A user selects their proper domain and is unable to log into their Windows computer. The error states: System cannot log you on to the domain because the systems computer account in its primary domain is missing or the password on that account is incorrect. Which of the following is the MOST likely cause for this error?
    A. The computer was disjoined from the domain.
    B. The users account was removed from Active Directory.
    C. The user typed in the wrong password.
    D. The computers account was removed from Active Directory.
    D. The computers account was removed from Active Directory.
    (this multiple choice question has been scrambled)
  31. An administrator setting up software RAID 1 on a Windows Server with two volumes for two separate hard drives, but the option for mirrored is grayed out. Which of the following is the MOST likely reason why this is occurring?
    A. The page file must be at least 4GB to support mirrored drives.
    B. The disks have been setup as dynamic.
    C. The disks have been setup as basic.
    D. Windows does not support software RAID 1.
    C. The disks have been setup as basic.
    (this multiple choice question has been scrambled)
  32. An administrator is setting up software RAID 5 on a Windows Server with two volumes for two separate hard drives, but the option for RAID 5 is grayed out. Which of the following is the MOST likely reason why?
    A. The page file must be at least 4GB to support RAID 5.
    B. The disks have been setup as dynamic.
    C. Windows does not support software RAID 5.
    D. Raid 5 requires three volumes.
    D. Raid 5 requires three volumes.
    (this multiple choice question has been scrambled)
  33. A Windows file server has run out of space. In the interim the administrator is moving several archived confidential folders that have been encrypted off the file server and onto an older servers file shares. After the move, a manager reports that they are able to access and modify some of the items that have been moved. Which of the following is the MOST likely issue?
    A. The manager is a power user on the temporary server.
    B. The temporary server was formatted as NTFS.
    C. The temporary server was formatted as FAT32.
    D. The manager is an administrator on the temporary server.
    C. The temporary server was formatted as FAT32.
    (this multiple choice question has been scrambled)
  34. When considering SAN to SAN replication between sites, which of the following is the MOST important concern?
    A. Block size
    B. WAN link speed
    C. File system type
    D. Disk size
    B. WAN link speed
    (this multiple choice question has been scrambled)
  35. Which of the following is a differentiating feature of file permissions as compared to share permissions?
    A. File permissions are more granular than share permissions.
    B. Full control can only be set using share permissions.
    C. File permissions are less granular than share permissions.
    D. Full control can only be set using file permissions.
    A. File permissions are more granular than share permissions.
    (this multiple choice question has been scrambled)
  36. Which of the following information would be on a system classification list?
    A. IP address
    B. Acceptable outage time
    C. Operating system version
    D. Disk drive size
    B. Acceptable outage time
    (this multiple choice question has been scrambled)
  37. Which of the following is the MOST important step in creating a system classification list?
    A. Interviewing system owners
    B. Verifying the OS manufacturers
    C. Consulting with the system manufacturers
    D. Locating a hosting facility
    A. Interviewing system owners
    (this multiple choice question has been scrambled)
  38. When troubleshooting hardware issues with a server, which of the following is MOST likely to cause a problem in receiving vendor support?
    A. Server type
    B. Third party cables
    C. Signed drivers
    D. Third party memory
    D. Third party memory
    (this multiple choice question has been scrambled)
  39. An administrator has ordered a new server and setup a dedicated RAID 1 array for the application database. While troubleshooting with performance monitoring tools, the administrator is receiving lower read/write speeds than expected. Which of the following would be the MOST likely cause for the lower performance?
    A. The administrator did not order high enough RPM drives.
    B. The administrator did not add the right amount of memory.
    C. There is a cooling issue with the server.
    D. The BIOS needs to be upgraded.
    A. The administrator did not order high enough RPM drives.
    (this multiple choice question has been scrambled)
  40. Which of the following is a benefit of software RAID?
    A. Increased data integrity
    B. Lower cost to implement
    C. More storage possibilities
    D. Higher performance
    B. Lower cost to implement
    (this multiple choice question has been scrambled)
  41. Which of the following RAID levels would provide the BEST performance with no fault protection?
    A. RAID 0
    B. RAID 3
    C. RAID 5
    D. RAID 1
    A. RAID 0
    (this multiple choice question has been scrambled)
  42. Which of the following describes how to calculate the amount of storage in a RAID 5 array?
    A. Number of drives X capacity of the largest drive
    B. (Number of drives 2) X capacity of the smallest drive
    C. Number of drives X capacity of the smallest drive
    D. (Number of drives 1) X capacity of the smallest drive
    D. (Number of drives 1) X capacity of the smallest drive
    (this multiple choice question has been scrambled)
  43. Which of the following BEST describes a DAS?
    A. A collection of disks presented as storage to multiple servers through dedicated channels.
    B. A collection of disks presented as storage to a single server through directly attached technologies.
    C. A collection of disks presented as storage to a single server through an existing network.
    D. A collection of disks presented as storage to multiple servers through an existing network.
    B. A collection of disks presented as storage to a single server through directly attached technologies.
    (this multiple choice question has been scrambled)
  44. Which of the following are ways to transport SAN traffic? (Select TWO).
    A. SATA
    B. iSCSI
    C. SCSI
    D. Fiber channel
    E. PATA
    • B. iSCSI
    • D. Fiber channel
  45. Which of the following media types can hold the GREATEST amount of data?
    A. DVD
    B. LTO
    C. SDLT
    D. Blu-Ray
    B. LTO
    (this multiple choice question has been scrambled)
  46. Which of the following keystrokes allows installation of third party storage drivers during a Windows set-up?
    A. F9
    B. F7
    C. F8
    D. F6
    D. F6
    (this multiple choice question has been scrambled)
  47. Which of the following expansion cards would be necessary to increase fault tolerance in a VoIP server?
    A. Second Modem
    B. Second PBX card
    C. Second HBA
    D. Second CPU
    B. Second PBX card
    (this multiple choice question has been scrambled)
  48. Which of the following would provide the BEST reference of normal server performance for a company's environment?
    A. OEM website
    B. Software logs
    C. Pre-installation plans
    D. Baseline documentation
    D. Baseline documentation
    (this multiple choice question has been scrambled)
  49. Which of the following should be done before and after a service or repair is performed on a server?
    A. Firmware update
    B. Defrag
    C. IPCONFIG /release
    D. Baseline
    D. Baseline
    (this multiple choice question has been scrambled)
  50. Which of the following is the GREATEST environmental concern for a server operating environment?
    A. Lighting
    B. Structural columns
    C. Elevation
    D. Temperature
    D. Temperature
    (this multiple choice question has been scrambled)
  51. A server connects to iSCSI presented SAN storage array through a dedicated NIC; however, the SAN traffic is passed on the same switches as the Ethernet network and VoIP traffic. The size of the presented drive is 700GB. The administrator has noticed a decrease in storage performance. Which of the following is MOST likely the cause?
    A. The servers power supply is starting to fail and causing the iSCSI NIC to intermittently lose power.
    B. The SAN is nearing capacity and should be expanded.
    C. The other network traffic is causing packet delays in the iSCSI network.
    D. There are too many users attempting to access the iSCSI presented disk.
    C. The other network traffic is causing packet delays in the iSCSI network.
    (this multiple choice question has been scrambled)
  52. Which of the following components channels air flow through a server chassis?
    A. Radiator
    B. Shroud
    C. Fan
    D. Heat sink
    B. Shroud
    (this multiple choice question has been scrambled)
  53. Which of the following is the MOST important reason for referencing the HCL?
    A. To ensure that all hardware being used can be upgraded in the future
    B. To ensure that all hardware being used has the latest firmware
    C. To ensure that all hardware being used is the most energy efficient
    D. To ensure that all hardware being used has previously been tested
    D. To ensure that all hardware being used has previously been tested
    (this multiple choice question has been scrambled)
  54. Which of the following expansion card slots was designed specifically for video cards?
    A. PCIx
    B. PCIe
    C. AGP
    D. ISA
    C. AGP
    (this multiple choice question has been scrambled)
  55. Which of the following storage connectors has the FASTEST speed?
    A. SAS
    B. IDE
    C. SCSI 320
    D. SATA
    A. SAS
    (this multiple choice question has been scrambled)
  56. Which of the following is the LEAST intrusive?
    A. Diagnostic LEDs
    B. Multimeter
    C. Remote management card
    D. Firmware update
    A. Diagnostic LEDs
    (this multiple choice question has been scrambled)
  57. An administrator wants to limit how much data each user is storing. Which of the following will BEST address this issue?
    A. SNMP
    B. ACL
    C. Disk management
    D. Quotas
    D. Quotas
    (this multiple choice question has been scrambled)
  58. Which of the following is the MOST likely connection type for a backup external modem?
    A. Serial
    B. SCSI
    C. IEEE 1394
    D. SATA
    A. Serial
    (this multiple choice question has been scrambled)
  59. Weekly backups of the system are done on Sundays, and daily backups are done the rest of the week. Which of following backup methods were used if the system crashes on Friday and only requires two backup sets to recover the system?
    A. Full and incremental
    B. Full and differential
    C. Differential and incremental
    D. Incremental and snapshot
    B. Full and differential
    (this multiple choice question has been scrambled)
  60. Which of the following devices would be installed if an administrator wants to control a group of servers from a remote location?
    A. RAID
    B. VLAN
    C. IP KVM
    D. KVM
    C. IP KVM
    (this multiple choice question has been scrambled)
  61. An administrator is upgrading memory on the server. Once the server in turned back on, the administrator notices that the memory has not changed. The system board website says the board should accept the new amount of memory. Which of the following should the administrator do FIRST?
    A. Reseat the memory chips.
    B. Replace memory chips with known good memory chips.
    C. Update the BIOS.
    D. Upgrade the server OS.
    A. Reseat the memory chips.
    (this multiple choice question has been scrambled)
  62. A server will not power on. Which of the following devices should the administrator use FIRST to determine the problem?
    A. TDR
    B. Loop back plugs
    C. Power supply tester
    D. System logs
    C. Power supply tester
    (this multiple choice question has been scrambled)
  63. Which of the following is a connection oriented transport layer protocol?
    A. TCP
    B. SNMP
    C. TFTP
    D. UDP
    A. TCP
    (this multiple choice question has been scrambled)
  64. Which of the following is a connectionless transport layer protocol?
    A. TCP
    B. UDP
    C. HTTP
    D. SMTP
    B. UDP
    (this multiple choice question has been scrambled)
  65. Which of the following is a public IP address?
    A. 10.100.11.1
    B. 192.168.100.1
    C. 172.31.254.40
    D. 172.15.16.76
    D. 172.15.16.76
    (this multiple choice question has been scrambled)
  66. A workstation is added to a newly created subnet using 192.168.100.0/24. A DHCP server is available on subnet 192.168.101.0/24. The user is unable to lease an address from the DHCP server. Which of the following would BEST resolve the problem?
    A. Add a second DHCP server to the 192.168.101.0/24 subnet.
    B. Add a DHCP relay to the 192.168.100.0/24 subnet.
    C. Add a DHCP server to the 192.168.100.0/24 subnet.
    D. Assign the workstation a static IP address.
    B. Add a DHCP relay to the 192.168.100.0/24 subnet.
    (this multiple choice question has been scrambled)
  67. A server has been assigned the 192.168.100.127/25 IP address. The server is experiencing strange network connectivity related problems. Which of the following would BEST describe the problem?
    A. IP address is a subnet network address.
    B. IP address is classful.
    C. IP address is a subnet broadcast address.
    D. IP address is classless.
    C. IP address is a subnet broadcast address.
    (this multiple choice question has been scrambled)
  68. A server crashed because it ran out of all free available disk space. After booting the server back up it is noticed that enhanced logging was enabled on the web server software months before. Which of the following is MOST likely causing the disk to run out of space?
    A. The web server requires larger disk drives.
    B. Traffic to the web server has increased.
    C. Log files are filling the disk.
    D. Disks are not large enough for the web server software.
    C. Log files are filling the disk.
    (this multiple choice question has been scrambled)
  69. The operating system partition on a server is nearly out of space on a Windows 2003 Server. The administrator notices that the file pagefile.sys is taking up nearly 2GB of space. Which of the following would BEST resolve this problem?
    A. Remove the page file from system properties.
    B. Move the page file to a free drive.
    C. Delete the file.
    D. Add more memory.
    B. Move the page file to a free drive.
    (this multiple choice question has been scrambled)
  70. A server has five hot pluggable SCSI disk drives in a RAID 5 array. The server OS crashed and the server will not boot. The administrator noticed that all of the disk drives have gone offline. Which of the following components would MOST likely have caused the problem?
    A. Motherboard
    B. SCSI drives
    C. Memory
    D. SCSI backplane
    D. SCSI backplane
    (this multiple choice question has been scrambled)
  71. A server failed Thursday evening before the nightly backup. The backup scheme in place was full backups every Sunday, incremental backups on Monday, Wednesday, and Friday, and differential backups on Tuesday, Thursday, and Saturday. To fully restore the server, which of the following is the LEAST amount of backup sets required?
    A. Four
    B. Two
    C. Three
    D. One
    C. Three
    (this multiple choice question has been scrambled)
  72. Which of the following backup types will reset the archive bit on files backed up? (Select TWO).
    A. Copy
    B. Full
    C. Snapshot
    D. Incremental
    E. Differential
    • B. Full
    • D. Incremental
  73. Which of the following backup types will not reset the archive bit on backed up files?
    A. Full
    B. Incremental
    C. Differential
    D. GFS
    C. Differential
    (this multiple choice question has been scrambled)
  74. When load balancing traffic between two web servers, which of the following technologies provides the LOWEST cost solution?
    A. Active/passive cluster
    B. DNS round robin
    C. Active/active cluster
    D. Log shipping
    B. DNS round robin
    (this multiple choice question has been scrambled)
  75. Which of the following technologies can provide geographically based load balancing with high availability between two web servers with static content?
    A. Multicast
    B. Active/passive cluster
    C. DNS round robin
    D. Active/active cluster
    D. Active/active cluster
    (this multiple choice question has been scrambled)
  76. Which of the following disaster recovery sites requires power and cabling to be run before it can be used?
    A. Cold site
    B. Failover site
    C. Hot site
    D. Warm site
    A. Cold site
    (this multiple choice question has been scrambled)
  77. At which of the following times should the administrator refer to the HCL?
    A. After installation
    B. Prior to purchasing hardware
    C. When installing drivers
    D. Before installation
    B. Prior to purchasing hardware
    (this multiple choice question has been scrambled)
  78. A Windows 2003 Server is no longer able to access its internal SCSI drive. The cables are connected, the drive has power, and the drive shows up in Device Manager; however, the My Computer window does not show the drive that was previously working and formatted with NTFS. Which of the following would be the FIRST step in regaining access to the drive?
    A. Rewrite the MBR.
    B. Recreate the partition that was deleted.
    C. Run a check disk on the drive.
    D. Reformat the NTFS partition.
    C. Run a check disk on the drive.
    (this multiple choice question has been scrambled)
  79. Which of the following is the FIRST course of action before implementing a change to a server?
    A. The change should be approved by management.
    B. Survey users to get their response to the potential server change.
    C. Implement RAID so the server does not go offline.
    D. Switch over to the alternate site so users are not affected.
    A. The change should be approved by management.
    (this multiple choice question has been scrambled)
  80. Which of the following is the BEST support channel for server software and hardware?
    A. Service Level Agreement (SLA)
    B. Online troubleshooting tools
    C. Vendor website
    D. Support forums
    C. Vendor website
    (this multiple choice question has been scrambled)
  81. Which of the following are examples of physical security measures? (Select TWO).
    A. Policies and procedures
    B. Encryption
    C. Locked doors
    D. Security personnel
    E. Backup tapes
    • C. Locked doors
    • D. Security personnel
  82. Which of the following is a way to protect server operating systems from a short term contractor?
    A. Biometric devices
    B. Mantraps
    C. Rack doors
    D. Limited logon hours
    D. Limited logon hours
    (this multiple choice question has been scrambled)
  83. Which of the following are types of biometric devices used in server rooms? (Select TWO).
    A. Mantraps
    B. Fingerprint scanners
    C. CCTV systems
    D. Retina scanner
    E. Proxy card readers
    • B. Fingerprint scanners
    • D. Retina scanner
  84. An administrator is attempting to recover from a power failure in the data center. Which of the following is the BEST way to recover the servers?
    A. Bring up the backup tape server, the DNS server, then the web server
    B. Bring up the web server, the time clock server, then the DHCP server
    C. Bring up the active directory server, the DNS server, then the web server
    D. Bring up the WINS server, the DNS server, then the web server
    C. Bring up the active directory server, the DNS server, then the web server
    (this multiple choice question has been scrambled)
  85. When making changes to a server, which of the following is the BEST way to troubleshoot a problem?
    A. Make changes to the system and document everything once the problem is resolved.
    B. Make a change and if the problem is not resolved, reverse the change.
    C. Perform root cause analysis and then test the theory to determine the cause.
    D. Make multiple changes to all affected areas to resolve all potential issues.
    B. Make a change and if the problem is not resolved, reverse the change.
    (this multiple choice question has been scrambled)
  86. An administrator is implementing a new data retention program for the company. Which of the following is the MOST important consideration as the new program is created?
    A. Ensuring that the backups for the retention program cover key business areas
    B. Differentiating between archiving and backup processes
    C. Awareness of potential legal requirements
    D. Awareness of company policy requirements
    C. Awareness of potential legal requirements
    (this multiple choice question has been scrambled)
  87. Which of the following is the MOST effective method to restrict staff members from accessing a service on a company server?
    A. Disable accounts for staff members who do not require server access.
    B. Implement anti-virus software on the server.
    C. Implement anti-spam software on the server.
    D. Implement ACLs.
    D. Implement ACLs.
    (this multiple choice question has been scrambled)
  88. Which of the following is the BEST way to allow web software through the server firewall?
    A. Open the corporate firewall to allow port 80.
    B. Implement an access control list (ACL).
    C. Implement port blocking on port 80.
    D. Implement an application exception.
    D. Implement an application exception.
    (this multiple choice question has been scrambled)
  89. Which of the following server types takes up the LEAST amount of space?
    A. 2U rack mount server
    B. Tower server
    C. 6U blade server
    D. 1U server
    D. 1U server
    (this multiple choice question has been scrambled)
  90. Which of the following RAID arrays should be used to achieve the MOST performance?
    A. Two drives with RAID 50
    B. Three drives with RAID 5
    C. Four drives with RAID 0
    D. Four drives with RAID 10
    C. Four drives with RAID 0
    (this multiple choice question has been scrambled)
  91. Which of the following RAID arrays should be used to achieve the BEST fault tolerance?
    A. Four drives with RAID 10
    B. Four drives with RAID 0
    C. Four drives with RAID 5
    D. Four drives with RAID 3
    A. Four drives with RAID 10
    (this multiple choice question has been scrambled)
  92. Which of the following expansion ports can a server boot from?
    A. Parallel
    B. USB
    C. AGP
    D. Serial
    B. USB
    (this multiple choice question has been scrambled)
  93. Users are having trouble printing in terminal services. The administrator finds that whenever a certain user prints the print spooler crashes. Which of the following is the MOST likely problem?
    A. The printer driver is not installed on the terminal server.
    B. The printer is not on the HCL.
    C. The user does not have the appropriate permissions to print.
    D. The user is using a PostScript driver.
    B. The printer is not on the HCL.
    (this multiple choice question has been scrambled)
  94. An administrator installs a driver, reboots the DC, and logs in to configure the NIC. Once the administrator opens the NIC properties, the server bluescreens and now will no longer boot into Windows. Which of the following is the FIRST thing the administrator should do?
    A. Boot into Last Known Good Configuration.
    B. Boot into Safe Mode.
    C. Boot into Directory Services Restore Mode.
    D. Reseat the NIC.
    B. Boot into Safe Mode.
    (this multiple choice question has been scrambled)
  95. Which of the following replication methods is MOST fault tolerant?
    A. Hot site
    B. Disk-to-disk replication in the same server
    C. Active/passive clustering at the same site
    D. Warm site
    A. Hot site
    (this multiple choice question has been scrambled)
  96. Which of the following is the FIRST thing to consider when designing an email retention policy?
    A. Mail server and backup capacity
    B. Project guidelines given by stakeholders
    C. Company policies and guidelines
    D. Local laws and industry regulations
    D. Local laws and industry regulations
    (this multiple choice question has been scrambled)
  97. Which of the following will allow a server to continue to function if a stick of memory fails? (Select TWO).
    A. Chipkill
    B. Memory RAID
    C. Registered memory
    D. ECC
    E. Hot spare
    • B. Memory RAID
    • E. Hot spare
  98. There is a power outage and all servers are shut down properly by the uninterruptible power supply (UPS) software. When one of the servers starts up it displays a logical drive failed error. This server has two processors, 16GB of memory, and a RAID 5 array with 10 drives. Which of the following is the MOST likely cause?
    A. Two failed processors
    B. Two failed drives
    C. A failed RAID controller
    D. Two failed sticks of memory
    B. Two failed drives
    (this multiple choice question has been scrambled)
  99. An administrator reboots a ten drive server, with a RAID 10 array, after a power failure and receives an error logical drive failed. Which of the following is the MOST likely cause?
    A. Backplane failure
    B. Bad cable
    C. Corrupt file system table
    D. Multiple drive failure
    A. Backplane failure
    (this multiple choice question has been scrambled)
  100. Which of the following tools can an administrator use to get a server baseline?
    A. Replication Monitor
    B. System Resource Monitor
    C. Performance Monitor
    D. Microsoft Baseline Security Analyzer (MBSA)
    C. Performance Monitor
    (this multiple choice question has been scrambled)
  101. Which of the following allows users to recover their deleted files on file shares by themselves?
    A. Shadow backup
    B. Windows restore
    C. Windows backup
    D. Shadow copies
    D. Shadow copies
    (this multiple choice question has been scrambled)
  102. Which of the following tools restricts device installation?
    A. File share properties
    B. Group Policy
    C. Disk Management
    D. Default domain policy
    B. Group Policy
    (this multiple choice question has been scrambled)
  103. Which of the following is MOST important to include on the disaster recovery documentation?
    A. All IT contact numbers
    B. Payroll
    C. Emergency exits
    D. The test plan
    D. The test plan
    (this multiple choice question has been scrambled)
  104. An administrator needs to implement a security patch policy on the network that adheres to an internal SLA. Which of the following actions BEST achieves this task?
    A. Define a test server group, schedule installation on production servers and then install all updates and patches.
    B. Define a test server group, install the patches and if successful schedule installation on production servers.
    C. Send an email to all company users and request the best time for installation.
    D. Install the patches during a non-working hour.
    B. Define a test server group, install the patches and if successful schedule installation on production servers.
    (this multiple choice question has been scrambled)
  105. An administrator is notified that all network printers are not printing. The administrator reviews the server and the print service is started. Which of the following is the cause of the problem?
    A. The spool folder is not on the C drive.
    B. A network printer was disconnected.
    C. The drivers for the printers are failing.
    D. The spool folder is full.
    D. The spool folder is full.
    (this multiple choice question has been scrambled)
  106. Which of the following is a reason to implement a local KVM instead of an IP KVM?
    A. Higher number of ports on a local KVM.
    B. Local KVMs are more secure.
    C. Local KVM supports all operating systems.
    D. Local KVMs allow multiple user access.
    B. Local KVMs are more secure.
    (this multiple choice question has been scrambled)
  107. An administrator will replace five current servers. Which of the following is the MOST important to review before installing new servers?
    A. Verify uninterruptible power supply (UPS) load
    B. Verify if server consumes 220V
    C. Verify CPU load
    D. Verify if server consumes 110V
    A. Verify uninterruptible power supply (UPS) load
    (this multiple choice question has been scrambled)
  108. An administrator identifies that a server is shutting down. The administrator powers up the server and OS loads but after a few minutes it powers down again. Which of the following is the cause?
    A. Redundant power supply failure
    B. CPU overheating
    C. Memory failure
    D. Hard disk failure
    B. CPU overheating
    (this multiple choice question has been scrambled)
  109. Which of the following statements is true about L1 cache?
    A. L1 cache operates faster than the processor.
    B. L1 cache is directly connected to the processor.
    C. L1 cache can deliver data in 5ns.
    D. L1 cache is located on the system board.
    B. L1 cache is directly connected to the processor.
    (this multiple choice question has been scrambled)
  110. Which of the following statements is true about L3 cache?
    A. L3 cache can deliver data in as little as 15ns.
    B. L3 cache runs at the speed of the processor.
    C. L3 cache operates faster than the system processor.
    D. L3 cache runs at the speed of the system bus.
    D. L3 cache runs at the speed of the system bus.
    (this multiple choice question has been scrambled)

What would you like to do?

Home > Flashcards > Print Preview