Home > Flashcards > Print Preview
The flashcards below were created by user
on FreezingBlue Flashcards
. What would you like to do?
Before being considered as having made relief, personnel shall accomplish the following:
- 1. Placed their safety equipment on the apparatus
- 2. Checked out SCBA and PASS alarm.
- 3. Reported directly to eigher CO or person being releaved.
Personnel that wish to be away from their regularly schedule work location must:
Obtain permission from the district chief
___, the district kchiefs may waive the 6 hour notice.
In the event of an emergency or extenuating ircumstances
When a leave request is submitted in the resource management system that effects staffing for the next calendar day, the individual making request
notify the CO on-duty immediately. That CO shall then notify the district chief asap
___ are responsible for leave request being submitted for personnel under their supervision.
___ will be considered before approving or disapproving any leave request.
Training, job efficiency,
Personnel calling in sick shall notify
the on duty company officer at their assigned station no later than 0730 on their scheduled duty day of There intention not to report for duty
Personnel intending to report for duty on the same shift for which they were granted sick leave shall contact the ___ must be done at least ____
Prior to returning to work.
- CO at heir assigned station directly.
- 1 hour
Upon return to duty,proper documentation must be provided to the ____. This shall include
- 1. Name of deceased
- 2. Relationsip
- 3. Date of funerel
- 4. Location of burial
Military leave ____ hrs
Not more than 240
Employees requesting military leave are responsible for notifying____ of the such dates for such leave
The employee shall provide his ___ with a copy of the ___ at the time he requests military leave.
- Official set of orders
Employees who are required to attend regularly scheduled training throughout the year, must___to attend these military training assemblies when they are scheduled to...
- Apply for leave
- Be on duty
Employees who are requesting military leave will also print out a____of the___, attach a copy of____to it, and forward it to the____ to be filed.
Hard copy, military leave request, official military orders, addministrative aid
Personnel are subject to be recalled during___. Failure to respond after___ shall be subject to disciplinary action may be exempt with approved leave. This exemption does not apply during periods of ____
- Proper notification
- General emergencies
Procedure following an inspection by a state or federal agency
- 1.Notify district chief
- 2. Notify feild safety officer or division chief of training and advise of results
- 3. If citation is issued, forward it to the feild safety officer by hand. If unable to hand deliver contact the district chief on that same day
Personnel on floor watch shall remain in. Close proximity to____ and ____;band shall be responsible for the proper ____ of all alarms and messages to station personnel
- Telephones and alarm terminals
- Reciet and relay
Time limit for visitors
Limited to a reasonable duration
Phone calls Received during______ shall be terminated quickly
Training, physical fittness, or apparatus back in service
___ approves long distance calls
Lost, found, stolen, or damaged shall be reported to
CO THEN DISTRI T CHIEF MAKE INVESTIGATION IF NECESSARY NOTIFY APPROPRIATE DIVISION CHIEF IN WRITING HE MAY THEN TAKE FURTHER ACTION
Personnel involved in the initial attack stages of fire suppression are to wear
Issued turnout gloves
Gloves shall be properly inspected after___ to determine
- Each use
- All seams are intact and no cuts or tears hve occured
Helmets are to be worn...
On all fireground operations or other hazardous situations
Helmets shall be maintained...
Per manufacturers' recomendations
Personnel are to wear turnout boots during
All fireground situations and during hazardous involving chemicals
Boots shall be inspected___ to determine if
Any cuts, tears, punctures, ect... Have occured
Helmets will be marked with
The appropriate rank designition
___ must be used when operating or testing any power tools
Proper eye protection
What would you like to do?
Home > Flashcards > Print Preview